1393 GI/2019 (1) jftLVªh laö Mhö ,yö&33004@99 REGD. NO. D. L.-33004/99 vlk/kj.k EXTRAORDINARY Hkkx II—[k.M 3—mi&[k.M (i)
PART II—Section 3—Sub-section (i) izkf/dkj ls izdkf'kr PUBLISHED BY AUTHORITY la- 154] ubZ fnYyh] 'kqØokj] ekpZ 1] 2019@iQkYxqu 10] 1940 No. 154] NEW DELHI, FRIDAY, MARCH 1, 2019/PHALGUNA 10, 1940 सड़कसड़कसड़कसड़क प�रवहनप�रवहनप�रवहनप�रवहन औरऔरऔरऔर राजमाग�राजमाग�राजमाग�राजमाग� म ंालयम ंालयम ंालयम ंालय अिधसचूनाअिधसचूनाअिधसचूनाअिधसचूना नई �द�ली, 1 ekpZ, 2019 सा.सा.सा.सा.का.का.का.का.िनिनिनिन.... 174174174174((((अ)अ)अ)अ)....———— क� �ीय मोटर यान िनयम, 1989 का और संशोधन करने के िलए कितपय िनयम का �ा�प, मोटर यान अिधिनयम, 1988 (1988 का 59 ) क� धारा 212 क� उपधारा (1) क� अपे�ानुसार भारत के राजप�, असाधारण, भाग II, खंड 3, उप-ख�ड (i) म� भारत सरकार के सड़क प�रवहन और राजमाग" मं�ालय क� अिधसूचना सं$या सा.का.िन. 1073(E) तारीख 30 अ%टूबर, 2018 )ारा �कािशत �कया गया था िजसम� �भािवत -ि.य स ेउस तारीख स,े िजसको उ. अिधसूचना वाले राजप� क� �ितया ंजनता को उपल0ध करवा दी गयी थ3। तीस �दन अविध क� समाि5 के पूव" आरोप और सुझाव मांगे गए थे;;;; उ% त राजप� अिधसूचना क� �ितयां जनता के िलए 30 अ% तबूर, 2018 को उपल0 ध कराई गई थ3; और �ा�प िनयम , उ% त के संबंध म� जनता से �ा< त आपि>य और सझुाव पर के@ �ीय सरकार )ारा यथा िवचार �कया गया ह;ै अतः अब, मोटर यान अिधिनयम, 1988 (1988 का 59) क� धारा 27 और धारा 64 )ारा �दC त शि.य का �योग करते Dए के@ �ीय सरकार के@ �ीय मोटर यान िनयम, 1989 का और संशोधन करने के िलए िनE निलिखत िनयम बनाती ह,ै अथा"त :- 1. संि�� तसंि�� तसंि�� तसंि�� त नाम और ारंभ नाम और ारंभ नाम और ारंभ नाम और ारंभ ---- (1) इन िनयम का संि�5 नाम के@ �ीय मोटर यान (ि)तीय संशोधन) िनयम, 2019 कहा जाएगा। (2) ये 1 अ%टूबर, 2019 से �वृC त ह ग।े 2 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)] 2. के@ �ीय मोटर यान िनयम, 1989 म� - (क) िनयम 16 म� - (i) उप-िनयम (1) म� श0 द और स$ं या “��प 6” के M थान पर िनE निलिखत रखा जाएगा, अथा"त :- “उपबंध 11 म� अनुबN िविशOताP को सिुनिQत करने के िलए ��प 7 म� िचप के िबना एक लेिमने�टड काड" �कार अथवा M माट" काड" �कार के �प म�”; (ii) उप-िनयम (2) म� “लेिमने�टड काड" �कार अथवा M माट" काड" �कार के चालन अनुTि5, ऐसे काड" �कार अथवा”, श0 द के M थान पर िनE निलिखत श0 द को रखा जाएगा, अथा"त :- “M माट" काड" �कार का चालन अनुTि5, जैस”े; (iii) उप-िनयम (3) का लोप �कया जाएगा; (ख) िनयम 18 के उप-िनयम (1) के खंड (ख) के M थान पर िनE निलिखत ‘खंड’ रखा जाएगा, अथा"त :- “(ख) आवेदक क� नवीनतम पासपोट" आकार क� छाया�ित,”; (ग) िनयम 32 के ‘�ट<पण’ म� ‘खंड 1’ के M थान पर िनE निलिखत ‘खंड’ रखा जाएगा, अथा"त:- “1. जहां ��प 7 म� िचप के िबना लेिमने�टड काड" अथवा M माट" काड" �कार का चालन अनुTि5 जारी �कया जाता ह,ै वहां दो सौ �पए का अित�र% त शु� क वसलूा जाएगा।”; (घ) िनयम 48 म� श0 द और स$ं या “�[प 23 अथवा ��प 23क” श0द और आंकड़ के Mथान पर िनिEलिखत श0द और आंकड़ ेरखे जाय�गे; “उपबंध 11 म� अनुबN िविशOताP को सुिनिQत करने के िलए �[प 23क” (ड.) िनयम 81 म� ‘�ट<पण 2’ के M थान पर िनE निलिखत ‘�ट<पण’ रखा जाएगा, अथा"त :- “�ट<पण 2. जहां रिजM^ीकरण �माण-प� िचप के िबना लेिमने�टड काड" के �प म� जारी �कया जाता ह ैअथवा M माट" काड" �कार का चालन अनुTि5 जारी �कया जाता ह,ै वहां �कराया खरीद अथवा प_े या दिृO बंधन करार का िनरसन �कए जाने के पQात् नया रिजM^ीकरण �माण-प� जारी करने के िसवाय दो सौ �पए का अित�र% त शु� क वसूल �कया जाएगा।”; (च) “��प 6” का लोप �कया जाएगा; (छ) “�[प 7” के M थान पर िनE निलिखत ‘��प’ रखा जाएगा, अथा"त :- “��प 7 [(िनयम 16 (1) और (2) दखे�] चालन अनुTि5 के िलए ��प (िचप के िबना लेिमने�टड काड" अथवा M माट" काड") दaृय (दिृOक) िनरी�ण जोन ¹Hkkx IIµ[k.M 3(i)º Hkkjr dk jkti=k % vlk/kj.k 3 क. सामने क� तरफ काड" क� िडजाइन म� िनE निलिखत डाटा को दaृय फाम" म� सिEमिलत �कया जाएगा - ख. काड" क� िपछली तरफ िनE निलिखत डाटा को दaृय फाम" म� सिEमिलत �कया जाएगा - 4 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)] 1. काड" क� िवशेषताP का 0 यौरा िनE नानुसार ह,ै अथा"त :- क. सामने क� तरफ के िलए : ख. पीछे क� तरफ के िलए : ¹Hkkx IIµ[k.M 3(i)º Hkkjr dk jkti=k % vlk/kj.k 5 2. िविशd टताएं (कककक) काड� का आकार काड� का आकार काड� का आकार काड� का आकार –––– 85.6 एमएम85.6 एमएम85.6 एमएम85.6 एमएम x 54.02 x 54.02 x 54.02 x 54.02 एमएमएमएमएमएमएमएम +/+/+/+/---- 2 2 2 2 एमएमएमएमएमएमएमएम; ; ; ; � यू� यू� यू� यूनतम मोटाई नतम मोटाई नतम मोटाई नतम मोटाई 0.7 0.7 0.7 0.7 एमएमएमएमएमएमएमएम (i) काड" या तो िबना िचप वाले लिेमने�टड काड" के ��प म�; अथवा आईएसओ/आईईसी 7816- भाग 1, 2, 3, 4, 8 और 9, आईएस16695 ( भाग 1: 2018) M माट" काड" टेE पलेट आeक" टे%चर भाग 1 : बेिसक कमांड सेट (िजसे सामा@ य तौर पर एससीओएसटीए कांटे% ट M माट" काड") क� अनपुालना म� आईसीसी (इंटीgे�टड सeक" ट काड") के ��प म� प�रभािषत टेE पलेट के अनुसार; अथवा (ii) आईएसओ/आईईसी 14443- भाग 1, 2, 3 और 4, आईएसओ/आईईसी 7816- भाग 4, 8 और 9, आईएस16695 (पाट" 1: 2018) M माट" काड" टेE पलेट आeक" टे% चर पाट" 1 : बेिसक कमांड सेट (िजसे सामा@ य तौर पर एससीओएसटीए कांटे% टलेस M माट" काड") क� अनुपालना म� तथा आईएसओ/आईईसी 7810 आईडी-1 मानक क� अनुपालना म� काड" डायम�शंस सिहत पीआईसीसी (�ो% सीिमटी इंटीgे�टड सeक" ट काड"), य�द उपबंध �कया गया हो। (खखखख) फ�ट कार और आकार फ�ट कार और आकार फ�ट कार और आकार फ�ट कार और आकार िविशि�यांिविशि�यांिविशि�यांिविशि�यां सामने क� तरफ पीछे क� तरफ i.सं. िवशेषताए ं फ ट का नाम आकार i.सं. िवशेषताए ं फ ट का नाम आकार 1. राjय/ संघ राjय �े� कोड िम�रयाड �ो रेगुलर 7 पीटी 1. चालन अनुTि5 नE बर िम�रयाड �ो बो� ड 8 पीटी 2. राkीय �तीक िसE बल 7.37 एमएम x 12.28 एमएम 2. % यूआर कोड (जैसा�क क� �ीय सरकार )ारा िविनeद"d ट �कया गया) लागू नह3 15 एमएम x 15 एमएम 3. काड" हडेर िम�रयाड �ो बो� ड 9 पीटी 3. अवैध मालवाहक वाहन# (रिजM^ीकरण सं$ या) िम�रयाड �ो रेगुलर 7 पीटी
4. चालन अनुTि5 सं$ या िम�रयाड �ो बो� ड 9 पीटी 4. जोिखम वैधता# िम�रयाड �ो रेगुलर 7 पीटी 5. आईसी िचप (य�द िवक� प चुना जाए) लागू नह3 लागू नह3 5. पव"तीय वैधता# िम�रयाड �ो रेगुलर 7 पीटी 6. जारी करने क� तारीख िम�रयाड �ो रेगुलर 7 पीटी 6. वाहन क� lेणी तािलका (वाहन क� lेणी, कोड, )ारा जारी, जारी करने क� तारीख, वाहन क� lेणी, बैज सं$ या, बैज सं$ या# , बैज जारी करने क� तारीख# , )ारा बैज जारी �कया गया# ) िम�रयाड �ो रेगुलर 5 पीटी 6 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)] 7. वैधता (एनटी) िम�रयाड �ो रेगुलर 7 पीटी 7. आपातकालीन सE पक" नE बर िम�रयाड �ो रेगुलर 6 पीटी 8. वैधता (टीआर)# िम�रयाड �ो रेगुलर 7 पीटी 8. अनुTि5 दनेे वाला �ािधकारी िम�रयाड �ो रेगुलर 6 पीटी 9. नाम िम�रयाड �ो रेगुलर 7 पीटी 9. िनयम 16 (2) का �प� 7 िम�रयाड �ो रेगुलर 6 पीटी 10. ज@ म ितिथ िम�रयाड �ो रेगुलर 7 पीटी 11. र% त समूह िम�रयाड �ो रेगुलर 7 पीटी 12. अंग दाता िम�रयाड �ो रेगुलर 7 पीटी 13. का पु�/पु�ी/पC नी िम�रयाड �ो रेगुलर 7 पीटी 14. पता िम�रयाड �ो रेगुलर 7 पीटी 15. �थम बार जारी क� तारीख िम�रयाड �ो रेगुलर 6 पीटी 16. धारक के हM ता�र िम�रयाड �ो रेगुलर 5 पीटी 17. फोटो लागू नह3 14.82 एमएम x 14.82 एमएम # : जहां लागू न हो अथवा तC संबंधी िवक� प न चुने जाने पर लेबल और मू�य दोन को ही �र% त रखा जाएगा। (गगगग) पृ� ठपृ� ठपृ� ठपृ� ठभिूम रंग ! यौभिूम रंग ! यौभिूम रंग ! यौभिूम रंग ! यौरारारारा सामने क� तरफ पीछे क� तरफ i.सं. ह%े स कोड m�ंट कलर i.स.ं ह%े स कोड m�ंट कलर सी1. #f8951d सी: 0 एम: 49 वाई: 100 के:0 सी 1. #ddf1fa सी:12 एम: 1 वाई:1 के:0 सी 2. gेिडएटं कलर शीष": #e7f5f5 बॉटम:#a3daf7 gेिडएंट कलर शीष":सी:8 एम: 0 वाई:3 के:0 बॉटम:सी:33 एम:1 वाई:0 के:0 सी 2. gेिडएटं कलर शीष": #e7f5f5 बॉटम:#a3daf7 gेिडएटं कलर शीष": सी:8 एम: 0 वाई:3 के:0 बॉटम:सी:33 एम:1 वाई:0 के:0 सी 3. #edf8fc सी:6 एम: 0 वाई:1 के:0 सी 3. #edf8fc सी:6 एम: 0 वाई:1 के:0 ¹Hkkx IIµ[k.M 3(i)º Hkkjr dk jkti=k % vlk/kj.k 7 मशीन $ारा पढ़े जाने वाला भाग (केवल * मामशीन $ारा पढ़े जाने वाला भाग (केवल * मामशीन $ारा पढ़े जाने वाला भाग (केवल * मामशीन $ारा पढ़े जाने वाला भाग (केवल * माट� काड� का िवक+ पट� काड� का िवक+ पट� काड� का िवक+ पट� काड� का िवक+ प चुनने पर ही लागू) चुनने पर ही लागू) चुनने पर ही लागू) चुनने पर ही लागू) संबंिधत राj य सरकार� मशीन )ारा पढ़े जाने वाले भाग म� अनTुि5 क� िनE निलिखत िवशेषताP का उपबंध कर�गी, अथा"त :- ,.स.ं,.स.ं,.स.ं,.स.ं फ.+ डफ.+ डफ.+ डफ.+ ड 1.1.1.1. चालनचालनचालनचालन अनु1ि2अनु1ि2अनु1ि2अनु1ि2 धारक 4 यधारक 4 यधारक 4 यधारक 4 यि5 का ! यौि5 का ! यौि5 का ! यौि5 का ! यौरा : रा : रा : रा : चालन अनुTि5 नE बर (डीएल) चालन अनुTि5 धारक का नाम चालन अनुTि5 धारक का पूरा नाम mलंग संर�क (माता/िपता/पित) का नाम संर�क के साथ संबंध (अथा"त : पु�, पC नी, पु�ी) ज@ म ितिथ (�दन/माह/वष" �ा�प म�) �थम पहचान िच@ ह ि)तीय पहचान िच@ ह र% त समूह मोबाइल नE बर ई-मेल आईडी : वैकि�पक मोबाइल नE बर आपात िMथित म� सE पक" �कए जाने वाला नE बर M थायी पता M थायी पते का िपनकोड M थायी पते म� राj य कोड M थायी पते म� िजले का नाम M थायी पते म� उप-मंडल/तालुका का नाम M थायी पते म� gाम का नाम वत"मान पता वत"मान पते म� राj य कोड वत"मान पते का िपनकोड वत"मान पते म� िजले का नाम वत"मान पते म� उप-मंडल/तालुका का नाम वत"मान पते म� gाम का नाम 2.2.2.2. अनु1ि2अनु1ि2अनु1ि2अनु1ि2 का ! यौका ! यौका ! यौका ! यौरा :रा :रा :रा : से वैध (प�रवहन) (�दन/माह/वष" �ा�प म�) तक वधै (प�रवहन) (�दन/माह/वष" �ा�प म�) से वैध (गैर-प�रवहन) (�दन/माह/वष" �ा�प म�) तक वधै (गैर-प�रवहन) (�दन/माह/वष" �ा�प म�) चालन अनुTि5 जारी करने क� �थम तारीख (�दन/माह/वष" �ा�प म�) 8 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)] �थम (मूल) जारी करने वाला �ािधकारी जोिखम वैधता क� तारीख (�दन/माह/वष" �ा�प म�) पव"तीय �े� वैधता क� तारीख (�दन/माह/वष" �ा�प म�) उस �ािधकारी का नाम िजसने प�रवहन �ािधकार जारी �कया था प�रवहन �ािधकार सं$ या प�रवहन �ािधकार तारीख (�दन/माह/वष" �ा�प म�) अवैध मालवाहक वाहन रिजM^ीकरण सं$ या अवैध मालवाहक ि)तीय वाहन रिजM^ीकरण सं$ या, य�द कोई हो अवैध मालवाहक तृतीय वाहन रिजM^ीकरण स$ं या, य�द कोई हो 3.3.3.3. वाहन क. 7णेी का ! यौवाहन क. 7णेी का ! यौवाहन क. 7णेी का ! यौवाहन क. 7णेी का ! यौरा :रा :रा :रा : वाहन क� lेणी (सीओवी) वाहन क� lेणी जारी करने क� तारीख (�दन/माह/वष" �ा�प म�) वाहन क� lेणी – )ारा जारी क� गई (नाम और पदनाम) बैज सं$ या बैज जारी करने क� तारीख (�दन/माह/वष" �ा�प म�) )ारा बैज जारी �कया गया – एलए काया"लय 4.4.4.4. िच: ! यौिच: ! यौिच: ! यौिच: ! यौरा : रा : रा : रा : चालन अनुTि5 धारक का छायािच� चालन अनुTि5 धारक के हM ता�र 5.5.5.5. वत�न ! यौ वत�न ! यौ वत�न ! यौ वत�न ! यौरा : रा : रा : रा : चालान/इनवाड" संख् या चालान क� तारीख (�दन/माह/वष" �ा�प म�) पृd ठांकन �ािधकारी क� आईडी पृd ठांकन �ािधकारी का नाम उ� लंघन �कया गया िनयम/धारा अनह"ता �कार (िनलE बन/िनरM त) से अनह"ता अविध (�दन/माह/वष" �ा�प म�) तक अनह"ता अविध (�दन/माह/वष" �ा�प म�) िनलंिबत �कए गए/िनरM त �कए गए वाहन क� lेणी िनपटान तारीख समी�ा तारीख (�दन/माह/वष" �ा�प म�) समी�ा �ािधकारी का नाम �ट< पणी :- (ज) ‘��प 23’ का लोप �कया जाएगा ; (झ) ‘��प 23 क’ के M थान पर िनE निलिखत ‘��प’ रखा जाए, अथा"त :- ¹Hkkx IIµ[k.M 3(i)º Hkkjr dk jkti=k % vlk/kj.k 9 ““““ ;प 23 क ;प 23 क ;प 23 क ;प 23 क [[[[िनयम 48 देखBिनयम 48 देखBिनयम 48 देखBिनयम 48 देखB]]]] रिजM^ीकरण �माण-प� (िचप के िबना लेिमने�टड काड" अथवा M माट"काड") दaृय (दिृOक) िनरी�ण जोन 1.(क). काड" म� सामने क� तरफ िडजाइन म� दaृय ��प म� िनE निलिखत डाटा सिEमिलत ह गे :- (ख). काड" क� पीछे क� तरफ िडजाइन म� दaृय ��प म� िनE निलिखत डाटा सिEमिलत ह गे - 10 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)] (ग). काड" क� िवशेषताP का 0 यौरा िनE नानुसार होगा, अथा"त :- (क) सामने क� तरफ : (ख) पीछे क� तरफ :
2. िविशd टताएं - (कककक) काड� का आकार काड� का आकार काड� का आकार काड� का आकार –––– 85.6 एमएम85.6 एमएम85.6 एमएम85.6 एमएम x 54.02 x 54.02 x 54.02 x 54.02 एएएएमएममएममएममएम +/+/+/+/---- 2 2 2 2 एमएमएमएमएमएमएमएम; ; ; ; � यू� यू� यू� यूनतम मोटाई नतम मोटाई नतम मोटाई नतम मोटाई 0.7 0.7 0.7 0.7 एमएमएमएमएमएमएमएम (i) काड" या तो िबना िचप वाले लेिमने�टड काड" के ��प म�; अथवा आईएसओ/आईईसी 7816-पाट" 1, 2, 3, 4, 8 और 9, आईएस16695 (पाट" 1: 2018) M माट" काड" टेE पलेट आeक" टे% चर पाट" 1 : बेिसक कमांड सेट (िजसे सामा@ य तौर पर एससीओएसटीए कांटे% ट M माट" काड") क� अनुपालना म� आईसीसी (इंटीgे�टड सeक" ट काड") के ��प म� प�रभािषत टेE पलेट के अनुसार; अथवा ¹Hkkx IIµ[k.M 3(i)º Hkkjr dk jkti=k % vlk/kj.k 11 (ii) आईएसओ/आईईसी 14443- पाट" 1, 2, 3 और 4, आईएसओ/आईईसी 7816-पाट" 4, 8 और 9, आईएस16695 (पाट" 1: 2018) M माट" काड" टेE पलेट आeक" टे% चर पाट" 1 : बेिसक कमांड सेट (िजसे सामा@ य तौर पर एससीओएसटीए कांटे% टलेस M माट" काड") क� अनुपालना म� तथा आईएसओ/आईईसी 7810 आईडी-1 मानक क� अनुपालना म� काड" डायम�शंस सिहत पीआईसीसी (�ो% सीिमटी इंटीgे�टड सeक" ट काड"), य�द उपबधं हो। (खखखख) फ�ट कार और आकार िविशि�यांफ�ट कार और आकार िविशि�यांफ�ट कार और आकार िविशि�यांफ�ट कार और आकार िविशि�यां सामने क� तरफ सामने क� तरफ i.सं. i.सं. i.सं. i.सं. i.सं. i.सं. i.सं. i.सं. 1. lेणी (एनटी/टीआर)- ए% सवाई िम�रयाड �ो रेगुलर 7 पीटी 1. lेणी (एनटी/टीआर)- ए% सवाई िम�रयाड �ो रेगुलर 7 पीटी 2. राjय/ संघ राjय �े� कोड-एबी िम�रयाड �ो रेगुलर 7 पीटी 2. राjय/ संघ राjय �े� कोड-एबी िम�रयाड �ो रेगुलर 7 पीटी 3. सुनहरा राkीय �तीक िसE बल 7.37 एमएम x 12.28 एमएम
3. वाहन lेणी िम�रयाड �ो रेगुलर 6 पीटी
4. काड" हडेर िम�रयाड �ो बो� ड 8 पीटी 4. वाहन का �कार (उदाहरण के िलए एलएमवी/एचएमवी/एचजीवी इC या�द) िम�रयाड �ो रेगुलर 6 पीटी 5. आईसी िचप (य�द िवक� प चुना जाए) लागू नह3 लागू नह3 5. रिजM^ीकरण सं$ या िम�रयाड �ो रेगुलर 6 पीटी 6. rधन िम�रयाड �ो रेगुलर 7 पीटी 6. % यूआर कोड (के@ �ीय सरकार )ारा िविनदsशन के अनुसार) लागू नह3 15 एमएम x 15 एमएम 7. उC सज"न मानक िम�रयाड �ो रेगुलर 7 पीटी 7. िविनमा"ण का माह और वष" िम�रयाड �ो रेगुलर 5.5 पीटी 8. रिजM^ीकरण सं$ या िम�रयाड �ो बो� ड 7 पीटी 8. िसल�डर क� सं$ या िम�रयाड �ो रेगुलर 5.5 पीटी 9. रिजM^ीकरण क� तारीख िम�रयाड �ो बो� ड 7 पीटी 9. ए% सल क� स$ं या# िम�रयाड �ो रेगुलर 5.5 पीटी 10. रिजM^ीकरण क� वैधता* (पCरवहन/वािणिEयक पCरवहन/वािणिEयक पCरवहन/वािणिEयक पCरवहन/वािणिEयक वाहन के िलए वाहन के िलए वाहन के िलए वाहन के िलए ““““Fफटनेस के अनुसारFफटनेस के अनुसारFफटनेस के अनुसारFफटनेस के अनुसार”””” म�ु�त �कया जाएगा) िम�रयाड �ो बो� ड 7 पीटी 10. िविनमा"ता का नाम िम�रयाड �ो रेगुलर 5.5pt
11. चेिसस नE बर िम�रयाड �ो रेगुलर 7 पीटी 11. मॉडल का नाम िम�रयाड �ो रेगुलर 5.5 पीटी 12. इंजन/मोटर नE बर िम�रयाड �ो रेगुलर 7 पीटी 12. रंग िम�रयाड �ो रेगुलर 5.5 पीटी 12 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)] 13. मािलक का नाम िम�रयाड �ो रेगुलर 7 पीटी 13. बॉडी �कार िम�रयाड �ो रेगुलर 5.5 पीटी 14. का पु�/पु�ी/पC नी (पृथक मािलक के मामले म�) िम�रयाड �ो रेगुलर 7 पीटी 14. बैठने क� (कुल) �मता िम�रयाड �ो रेगुलर 5.5 पीटी 15. पता िम�रयाड �ो रेगुलर 7 पीटी 15. M ट�mडगं �मता# िम�रयाड �ो रेगुलर 5.5 पीटी 16. काड" जारी करने क� तारीख िम�रयाड �ो रेगुलर 6 पीटी 16. M पीपर �मता# िम�रयाड �ो रेगुलर 5.5 पीटी 17. मािलक का iमांक िम�रयाड �ो रेगुलर 7 पीटी 17. लदान रिहत भार (�कgा.) िम�रयाड �ो रेगुलर 5.5 पीटी 18. लदान भार# (�कgा.) िम�रयाड �ो रेगुलर 5.5 पीटी 19. सकल कुल भार# (�कgा.) िम�रयाड �ो रेगुलर 5.5 पीटी 20. % यूिबक �मता (केड0 � यू) िम�रयाड �ो रेगुलर 5.5 पीटी 21. हास" पावर (बीएचपी) िम�रयाड �ो रेगुलर 5.5 पीटी 22. u हील बेस (एमएम) िम�रयाड �ो रेगुलर 5.5 पीटी 23. फाइन�सर का नाम# िम�रयाड �ो 5.5 पीटी 24. रिजM^ीकरण �ािधकारी का नाम िम�रयाड �ो 5.5 पीटी 25. फाम" 23 ए िम�रयाड �ो रेगुलर 6 पीटी # : जहां लागू न हो अथवा तC संबंधी िवक� प न चुने जाने पर लेबल और मू�य दोन को ही �र% त रखा जाएगा। (गगगग) पृ� ठपृ� ठपृ� ठपृ� ठभिूम रंग ! यौभिूम रंग ! यौभिूम रंग ! यौभिूम रंग ! यौरारारारा सामने क. तरफसामने क. तरफसामने क. तरफसामने क. तरफ पीछे क. तरफपीछे क. तरफपीछे क. तरफपीछे क. तरफ ,.सं.,.सं.,.सं.,.सं. हेH सहेH सहेH सहेH स कोड कोड कोड कोड I ंट मीिडया के िलए I ंट मीिडया के िलए I ंट मीिडया के िलए I ंट मीिडया के िलए ,.स.ं,.स.ं,.स.ं,.स.ं हेH सहेH सहेH सहेH स कोड कोड कोड कोड I ंट मीिडया के िलए I ंट मीिडया के िलए I ंट मीिडया के िलए I ंट मीिडया के िलए सी1. #44c7f1 सी:60 एम:0 वाई:1 के:0 सी1. #44c7f1 सी:60 एम:0 वाई:1 के:0 सी2. #f8951d सी:0 एम: 49 वाई:100 के:0 सी2. #f8951d सी:0 एम: 49 वाई:100 के:0 सी3. gेिडएटं कलर शीष": # e7f5f5 बॉटम: #a3daf7 gेिडएंट कलर शीष": सी:8 एम: 0 वाई:3 के:0 बॉटम: सी:33 एम:1 वाई:0 के:0 सी3. gेिडएटं कलर शीष": # e7f5f5 बॉटम: #a3daf7 gेिडएटं कलर शीष": सी:8 एम: 0 वाई:3 के:0 बॉटम: सी:33 एम:1 वाई:0 के:0 ¹Hkkx IIµ[k.M 3(i)º Hkkjr dk jkti=k % vlk/kj.k 13 सी4. gेिडएटं कलर शीष": #ffffff बॉटम: #cbe5ef gेिडएंट कलर शीष": सी:0 एम: 0 वाई:3 के:0 बॉटम: सी:9 एम: 2वाई : 3 के:0 सी4. gेिडएटं कलर शीष": #ffffff बॉटम: #cbe5ef gेिडएटं कलर शीष": सी:0 एम: 0 वाई:3 के:0 बॉटम: सी:9 एम:2 वाई:3 के:0 मशीन $ारा पढ़े जाने वाला भाग (केवल * मामशीन $ारा पढ़े जाने वाला भाग (केवल * मामशीन $ारा पढ़े जाने वाला भाग (केवल * मामशीन $ारा पढ़े जाने वाला भाग (केवल * माट� काड� का िवक+ पट� काड� का िवक+ पट� काड� का िवक+ पट� काड� का िवक+ प चुनने पर ही लागू) चुनने पर ही लागू) चुनने पर ही लागू) चुनने पर ही लागू) संबंिधत राj य सरकार� मशीन )ारा पढ़े जाने वाले भाग म� रिजM^ीकरण �माण-प� क� िनE निलिखत िवशेषताP का �ावधान कर�गी, अथा"त :- ,.सं.,.सं.,.सं.,.सं. �े:�े:�े:�े: 1.1.1.1. रिज*Kीकरण ! यौरिज*Kीकरण ! यौरिज*Kीकरण ! यौरिज*Kीकरण ! यौरा : रा : रा : रा : रिजM^ीकरण सं$ या रिजM^ीकरण क� तारीख (�दन/माह/वष" �ा�प म�) iय क� तारीख (�दन/माह/वष" �ा�प म�) रिजM^ीकरण का �कार (एन, ए, ओ, डी) रिजM^ीकरण वैधता (�दन/माह/वष" �ा�प म�) ((((पCरवहन/वािणिEयक वाहन के िलए पCरवहन/वािणिEयक वाहन के िलए पCरवहन/वािणिEयक वाहन के िलए पCरवहन/वािणिEयक वाहन के िलए ””””Fफटनेस के अनुसारFफटनेस के अनुसारFफटनेस के अनुसारFफटनेस के अनुसार” ” ” ” अंFकत Fकया जाए) अंFकत Fकया जाए) अंFकत Fकया जाए) अंFकत Fकया जाए) डीलर का नाम रिजM^ीकरण �ािधकारी का नाम 2.2.2.2. 4 य4 य4 य4 यि5गत ! यौि5गत ! यौि5गत ! यौि5गत ! यौरा : रा : रा : रा : मािलक का नाम का पु�/पC नी/पु�ी (य�द पृथक M तर पर हो) मािलक का वत"मान पता मािलक का M थायी पता मािलक क� iमांक सं$ या M वािमC व �कार 3.3.3.3. वाहन का ! यौवाहन का ! यौवाहन का ! यौवाहन का ! यौरा: रा: रा: रा: वाहन क� lेणी िनमा"ता/िविनमा"ता मॉडल िसल�डर क� सं$ या हास" पावर (फामsट 99999.99) बैठने क� �मता M ट�mडगं �मता M पलीपर �मता लदान रिहत भार (�कgा.) लदान भार (�कgा.) सकल कुल भार, य�द लागू हो (�कgा.) u हीलबेस (एमएम) 14 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)] % यूिबक �मता (फामsट 99999.99) vलोर ए�रया (वग" मीटर) (फामsट 999.999) rधन चेिसस नE बर इंजन नE बर बॉडी का �कार रंग िविनमा"ण का माह और वष" (माह/वष") िवiय रािश उC सज"न मानक ऊंचाई (एमएम) लE बाई (एमएम) चौडाई (एमएम) एसी �फ�टड (हां/नह3) िविडयो �फ�टड (हां/नह3) आिडयो �फ�टड (हां/नह3) 4.4.4.4. पCरवहन यान का एH सपCरवहन यान का एH सपCरवहन यान का एH सपCरवहन यान का एH सल ! यौल ! यौल ! यौल ! यौरा :रा :रा :रा : ए% सल क� सं$ या टायर क� सं$ या – wंट ए% सल टायर क� सं$ या – �रयर ए% सल टायर क� सं$ या – ट�डमे ए% सल टायर क� सं$ या – अ@ य ए% सल wंट ए% सल (टायर का िववरण और आकार) �रयर ए% सल (टायर का िववरण और आकार) ट�डेम ए% सल (टायर का िववरण और आकार) अ@ य ए% सल (टायर का िववरण और आकार) wंट ए% सल भार (�कgा.) �रयर ए% सल भार (�कgा.) ट�डमे ए% सल भार (�कgा.) अ@ य ए% सल भार (�कgा.) ओवरह�ग �रयरह�ग 5.5.5.5. संलM नसंलM नसंलM नसंलM न Kेलर/समेी Kेलर/समेी Kेलर/समेी Kेलर/समेी----Kेलर का अितCरH तKेलर का अितCरH तKेलर का अितCरH तKेलर का अितCरH त ! यौ ! यौ ! यौ ! यौरा (यFद लागू हो) :रा (यFद लागू हो) :रा (यFद लागू हो) :रा (यFद लागू हो) : संलx न समेी-^ेलर क� सं$ या संलx न ^ेलर क� रिजM^ीकरण सं$ या 6.6.6.6. Iलंकड हास� वाहन स.ं का अितCरH तIलंकड हास� वाहन स.ं का अितCरH तIलंकड हास� वाहन स.ं का अितCरH तIलंकड हास� वाहन स.ं का अितCरH त ! यौ ! यौ ! यौ ! यौरा (यFद यह आरसी सेमीरा (यFद यह आरसी सेमीरा (यFद यह आरसी सेमीरा (यFद यह आरसी सेमी----Kेलर/Kेलर क. हो) : Kेलर/Kेलर क. हो) : Kेलर/Kेलर क. हो) : Kेलर/Kेलर क. हो) : हास" वाहन क� रिजM^ीकरण सं$ या, य�द लागू हो 7.7.7.7. हाइपोिथकेसन ! यौहाइपोिथकेसन ! यौहाइपोिथकेसन ! यौहाइपोिथकेसन ! यौरारारारा*3 :*3 :*3 :*3 : फाइन�सर का नाम ¹Hkkx IIµ[k.M 3(i)º Hkkjr dk jkti=k % vlk/kj.k 15 8.8.8.8. चालान िववरणचालान िववरणचालान िववरणचालान िववरण*40 :*40 :*40 :*40 : चालान सं$ या. आरोिपत lेणी (डी-चालक, सी-प�रचालक, ओ-मािलक) धारा (धाराएं) (य�द 1से अिधक ह तो िडिलिमटर के साथ केवल कोड) चैल�ज करने वाले अिधकारी का नाम M थान चालान क� तारीख और समय, �दन/माह/वष" तथा घंटे/िमनट ��प म� िनपटान अिधकारी का नाम शािMत रसीद स$ं या 9.9.9.9. * था* था* था* थायी अनुमितयी अनुमितयी अनुमितयी अनुमित----प: ! यौप: ! यौप: ! यौप: ! यौरा : रा : रा : रा : अनुमित-प� सं$ या अनुमित-प� का �कार (िववरण) अनुमित-प� जारी करने वाले �ािधकारी का नाम से वैध (�दन/माह/वष" �ा�प म�) तक वधै (�दन/माह/वष" �ा�प म�) �ितM थापन तारीख (�दन/माह/वष" �ा�प म�) �े� (अथा"त M थानीय, िजला, ��े, राj य इC या�द) से �ट (माग") तक �ट चरण माग" क� लE बाई (�क.मी.) �ित�दन आवाजाही (�^प) 10.10.10.10. उि+लिखत वाहन (यथाउि+लिखत वाहन (यथाउि+लिखत वाहन (यथाउि+लिखत वाहन (यथा-उि+लिखत वाहन क. रिज*Kीकरण संS याउि+लिखत वाहन क. रिज*Kीकरण संS याउि+लिखत वाहन क. रिज*Kीकरण संS याउि+लिखत वाहन क. रिज*Kीकरण संS या) के साथ पंजीकृत) के साथ पंजीकृत) के साथ पंजीकृत) के साथ पंजीकृत अितCरH तअितCरH तअितCरH तअितCरH त अथवा वैकि+पक सेमी अथवा वैकि+पक सेमी अथवा वैकि+पक सेमी अथवा वैकि+पक सेमी----Kेलर (Kेलस�) का ! यौKेलर (Kेलस�) का ! यौKेलर (Kेलस�) का ! यौKेलर (Kेलस�) का ! यौरा : रा : रा : रा : बॉडी �कार लदान रिहत भार (�कgा.) लदान यु% त भार (�कgा.) चेिसस नE बर wंट ए% सल (स$ं या, टायर का िववरण और आकार) �रयर ए% सल (स$ं या, टायर का िववरण और आकार) ट�डमे ए% सल (स$ं या, टायर का िववरण और आकार) अ@ य ए% सल (सं$ या, टायर का िववरण और आकार) wंट ए% सल भार (�कgा.) �रयर ए% सल भार (�कgा.) ट�डम ए% सल भार (�कgा.) अ@ य ए% सल भार (�कgा.) 11.11.11.11. CरKो FफUटंग ! यौCरKो FफUटंग ! यौCरKो FफUटंग ! यौCरKो FफUटंग ! यौरा : रा : रा : रा : �कट िविनमा"ता 16 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)] �कट का �कार �कट काय"शाला �कट सी�रयल नE बर �कट पीयूसीसी मानदडं काय"शाला लाइस�स नE बर �फटम�ट तारीख (�दन/माह/वष" ��प म�) हाइyो परी�ण तारीख (�दन/माह/वष" �ा�प म�) िसल�डर सी�रयल नE बर (ञ) ‘उपाबंध 11’ के M थान पर िनE निलिखत ‘उपाबंध’ रखा जाए, अथा"त :- ““““उपाबंधउपाबंधउपाबंधउपाबंध 11111111 [ [ [ [ िनयम 2िनयम 2िनयम 2िनयम 2,,,, िनयम 16 और िनयम 48 के खंडिनयम 16 और िनयम 48 के खंडिनयम 16 और िनयम 48 के खंडिनयम 16 और िनयम 48 के खंड ((((खंड�खंड�खंड�खंड�)))) को देखBको देखBको देखBको देखB]]]] I. िबना िचप लेिमनेCटड काड� कार अथवा * मािबना िचप लेिमनेCटड काड� कार अथवा * मािबना िचप लेिमनेCटड काड� कार अथवा * मािबना िचप लेिमनेCटड काड� कार अथवा * माट� काड� कार के चालन अन1ुि2 और रिज*Kीकरण माणट� काड� कार के चालन अन1ुि2 और रिज*Kीकरण माणट� काड� कार के चालन अन1ुि2 और रिज*Kीकरण माणट� काड� कार के चालन अन1ुि2 और रिज*Kीकरण माण----प: क. प: क. प: क. प: क. िविश� टिविश� टिविश� टिविश� टताएं ताएं ताएं ताएं ---- (क) समे�कत सeक" ट काड" (आईसीसी, िजसे सामा@ यत: कांटे% ट M माट" काड" कहा जाता ह)ै अथवा �ो% सीिमटी) समे�कत सeक" ट काड" (पीआईसीसी, िजसे सामा@ यत: काटें% टलसे M माट" काड" कहा जाता ह)ै। (ख) आईसीसी, आईएसओ/आईईसी 7816-1, 2 और 3 तथा पीआईसीसी, आईएसओ/आईईसी 14443-1, 2, 3 और 4 क� अनुपालना म� जारी �कए जाएंगे। (ग) आईसीसी और पीआईसीसी दोन ही आईएसओ/आईईसी 7816-4, 8 और 9; आईएस-16695 भाग ।, 2018 (िजसे सामा@ यत: एससीओएसटीए के नाम से जाना जाता ह)ै क� अनुपालना म� ह ग।े (घ) ईईपीआरओएम अथवा vलैश के �प म� िMथर मैमोरी सिहत @ यूनतम 10 वष" तक डाटा �ितधारण। (ङ) िMथर मैमोरी के िलए @ यूनतम 300,000 लेखन चi। (च) हड"वेयर (कं^ोलर) ईएएल 4+ (अथवा इससे अिधक) क� अनुपालना और �माणन म� होगा और इसके िलए माइiोकं^ोलर (आरओएम आधा�रत ओएस काया"@ वयन के मामले म�) के मू� यांकन के सुर�ा ल{ य सिहत सामा@ य मानदडं �माण-प� अथवा बूट लोडर/vलैश लोडर/M माट" �ोgाम/बूट �ोgाम (vलशै आधा�रत ओएस काया"@ वयन के मामले म�) सिहत माइiोकं^ोलर, जो सामा@ य मानदडं �माण-प� के अधीन होगा। सामा@ य मानदंड �माण-प� का ताC पय" है बीएसआई-सीसी-पीपी-0035-2007/बीएसआई-सीसी-पीपी-0084-2014 (अथवा नवीनतम) संर�ण �प-रेखा। (छ) �चालन �णाली को िचप िनमा"ता के पूण" M वािमC व वाली सुिवधा म� जल M तर तक िचप सिहत vलैश ममैोरी अथवा आरओएम म� लोड �कया जाएगा और इसे सिुवधा उपकरण म� इस �कार लगाया जाएगा �क इसे आंिशक तौर पर अथवा पूण" तौर पर न तो बदला जा सके, न आशोिधत �कया जा सके, न िमटाया जा सके या हटाया जा सके। (ज) �चालन अनुकूल तापमान 25 से. से +55 से. तक होगा। (झ) पाली िवनाइल % लोराइड (पीवीसी) के िलए : x लासी सरफेस के िलए पाली िवनाइल % लोराइड (पीवीसी)/एi�लोनाइ^ाइल 0 यूटाडाइन M टाइ�रन (एबीएस)/पेट जी < लािMटक कंM ̂ % शन का लेप �कया जाना चािहए ता�क कलर सबिलमेशन m�}ंटंग हो सके। ¹Hkkx IIµ[k.M 3(i)º Hkkjr dk jkti=k % vlk/kj.k 17 (ञ) पालीका ब~नेट काड" के िलए : िबना �कसी ग द अथवा एडहेिसव के ताप और दाब सिहत (लिेमने�टड) शुN पालीकाब~नेट परत का �योग करते Dए बD-परत वाले काड" का िनमा"ण। बा� परत सिहत काड" बाडी सामgी लेजर एनgेmवंग के मा� यम से M वयं के उपयोग हेतु उपयु% त होगा। II. चालन अनु1ि2 और रिज*Kीकरण माणचालन अनु1ि2 और रिज*Kीकरण माणचालन अनु1ि2 और रिज*Kीकरण माणचालन अनु1ि2 और रिज*Kीकरण माण----प: हेतु सामWी िविनदXशन प: हेतु सामWी िविनदXशन प: हेतु सामWी िविनदXशन प: हेतु सामWी िविनदXशन ---- (क) काड� के पCरमाण (लY बाकाड� के पCरमाण (लY बाकाड� के पCरमाण (लY बाकाड� के पCरमाण (लY बाईईईई----चौड़ाई) चौड़ाई) चौड़ाई) चौड़ाई) –––– चालन अनुTि5 और रिजM^ीकरण �माण-प� के िलए उपयोग म� लाया जाने वाला काड" आईडी-1 अ�यु% त और वापस लौटाए गए काड� के िलए सपु�रभािषत आईएसओ/आईईसी 7810 मानक क� अनुपालना म� होगा। आईडी-1 काड� के िलए स�ता, �कनार क� अM पd टता इC या�द आईएसओ/आईईसी 7810, खंड 5 म� यथा प�रभािषत के अनु�प होगी। काड" के भी आयाम का मापन आईएओ/आईईसी 10373-1 म� यथा प�रभािषत मानक परी�ण प�रिMथितय के अधीन खंड 5.2 म� यथा प�रभािषत आईएसओ/आईईसी 10373-1 मानक के अनुसार �कया जाएगा। (ख) काड�काड�काड�काड� वारपेजवारपेजवारपेजवारपेज औरऔरऔरऔर सतहसतहसतहसतह िव;पणिव;पणिव;पणिव;पण ––––काड" क� ‘vलैट �रिजड < लेट’ से ‘कनवे% स सरफेस’ के �कसी भाग तक अिधकतम दरूी काड" क� मोटाई सिहत 1.5 एमएम से अिधक नह3 होगी। इसके अित�र% त, तैयार काड" क� अिधकतम और @ यूनतम मोटाई के बीच का अंतर 0.10 एमएम से अिधक नह3 होगी। अिधकतम और @ यूनतम मोटाई का मापन करने के िलए कांटे% ट िचप पर भी िवचार �कया जाएगा। इस �कार, सE पूण" आईसी कांटे% ट सरफेस का कोई भी िब@ द ु 0.10 एमएम से ऊपर तथा 0.10 एमएम से नीच े नह3 होगा। यह परी�ण आईएसओ/आईईसी 10373-1 म� यथा व�ण"त मानक मापन पNित का �योग करते Dए �कया जाएगा। (ग) काड�काड�काड�काड� सामWीसामWीसामWीसामWी औरऔरऔरऔर िनमा�णिनमा�णिनमा�णिनमा�ण ––––काड" का िनमा"ण पालीिवनाइल % लोराइड (पीवीसी), एi�लोनाइ^ाइल 0 यूटाडाइन M टाइरीन (एबीएस) अथवा पेट जी या पाली काब~नेट < लािMटक सामgी का �योग करते Dए �कया जाएगा, जब तक �क अ@ यथा िविनeद"d ट न �कया जाए। काड" का िनमा"ण आईएसओ 7816-2 क� अनुपालना म� कांटे% ट िचप (आईसीसी हतुे) का अंतवsशन करते Dए बािंडड सामिgय क� सहायता स े�कया जाएगा। (घ) काड�काड�काड�काड� क.क.क.क. िवशेषताएंिवशेषताएंिवशेषताएंिवशेषताएं –––– काड" क� िवशेषताP को आईएसओ/आईईसी 7810 मानक म� प�रभािषत �कया जाएगा, जैसा�क यहां रेखां�कत �कया गया ह ै:- (i) वंकन कठोरता - (1). वंकन कठोरता को आईएसओ/आईईसी 7810 मानक म� प�रभािषत �कया जाएगा। इसक� परी�ण ��iया-िविधय का 0 यौरा आईएसओ/आईईसी 10373-1, खंड 5.7 म� �दया गया ह।ै वंकन कठोरता परी�ण के िलए काड" का िनE निलिखत चार िव@ यास म� �योग �कया जाएगा, अथा"त :- (क) अंत:M थािपत िचप ऊपर क� ओर तथा काड" का �कनारा बंिधत उपकरण क� तरफ करते Dए काड" को िचप के नजदीक लाकर। (ख) अंत:M थािपत िचप ऊपर क� ओर तथा काड" का �कनारा बंिधत उपकरण क� तरफ करते Dए काड" को िचप से दरू ले जाकर। (ग) अंत:M थािपत िचप नीचे क� ओर तथा काड" का �कनारा बंिधत उपकरण क� तरफ करते Dए काड" को िचप के नजदीक लाकर। (घ) अंत:M थािपत िचप नीचे क� ओर तथा काड" का �कनारा बंिधत उपकरण क� तरफ करते Dए काड" को िचप से दरू ले जाकर। (2) सभी चार िव@ यास म� अिधकतम अनुमC य वंकन िव�पण एक समान होगा। (ii) रसायन� का ितरोधक रसायन� का ितरोधक रसायन� का ितरोधक रसायन� का ितरोधक –––– काड" आईएसओ/आईईसी 7810, खंड 8.4 म� यथा-उि�लिखत रसायन का �ितरोधक होगा। रसायन �ितरोध क� जांच अ� पकािलक तथा दीघ"कािलक सदंषूण के िलए �रएज��स का �योग करते Dए आईएसओ/आईईसी 10373-1, खंड 5.4 म� रेखा�ंकत ��iया-िविध के अनुसार क� जाएगी। (iii) भंडारण अपे�ाएं - (1). दM तावेज के इस खंड म� यथा-उि�लिखत काड" क� िवशेषताएं भंडारण अपे�ाP के तौर पर िनE निलिखत ताप और आ�"ता प�रिMथितय म� अप�रव�त"त होगी, अथा"त :- 18 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)] (क) तापमान र�ज - 5-40°से.। (ख) सापे� आ�"ता र�ज - 10-85 �ितशत। (2). काड" क� वंकन कठोरता का परी�ण इस ेिनE निलिखत दो पया"वरणीय प�रिMथितय म� रखते Dए क� जाएगी, अथा"त :- (I) 5°स.े तापमान और 10 �ितशत सापे� आ�"ता, और (II) 40°से. तापमान और 85 �ितशत सापे� आ�"ता। (3). इन दो प�रिMथतयो म� स े�Cयेक के िलए अनावरण हतुे पया"वरणीय प�रिMथित म� काड" को एक घंटे के िलए रखा जाएगा। यह परी�ण केवल काड" क� िवशेषताP को M थािपत करती ह ैतथा यह मु�ण संबंधी �कसी िवशेषता, िजनको आगे प�रभािषत �कया गया ह,ै को M थािपत नह3 करती ह।ै (iv) िवश� कन सुदढ़ृता – काड" सामgी क� सघंटक परत क� िवश� कन सुदढ़ृता आईएसओ/आईईसी 7810, खंड 8.8 म� िविनeद"d ट @ यूनतम M तर क� होगी। िवश� कन सुदढ़ृता क� जांच 90° िवश� कन कोण के साथ आईएसओ/आईईसी 10373-1, खंड 5.4 म� रेखां�कत ��iया िविध के अनुसार क� जाएगी। (v) आसंजन �ितरोध – (क) जब तैयार काड� को 5 काड� के M टॉक म� एक साथ रखा जाता ह ैऔर ऊपर 1.5 �कलोgाम का िनवल भार रखा जाता ह ैऔर इ@ ह� 7 �दन तक 40 ± 3°से. ताप, 80 �ितशत सापे� आ�"ता पर रखा जाता ह,ै तो कोई भी काड" पर कोई �ितकूल �भाव जसेै लेिमनेशन हटना, रंग उड़ना अथवा साथ के काड� पर रंग अंत�रत होना, सतही प�रवत"न होना, एक काड" से दसूरे काड" तक सामgी अंत�रत होना और िव�पण नह3 होगा। सभी काड� के भौितक आयाम इस दM तावेज के खंड 5 म� यथा उि�लिखत िMथित म� कायम रह�गे। (ख) काड� को ढेर के बीच म� से यादिृ�छकृत तरीके से हाथ )ारा आसानी से अलग करते Dए इनका परी�ण �कया जाएगा तथा रंग अंतरण, रंग उड़ने, सतही बनावट इC या�द क� बनावट म� प�रवत"न का िनरी�ण �कया जाएगा। �C यके परी�ण के उपरांत इस दM तावेज म� उि�लिखत सीमाP के भीतर काड� के आयाम , काड" वारपेज और सतही िव�पण क� जांच क� जाएगी। (ङ) गZ यागZ यागZ यागZ याZ मZ मZ मZ मकककक वंकनवंकनवंकनवंकन ---- काड� क� गC याC मक वंकन जांच आईएसओ/आईईसी 10373-1, खंड 5.8 म� रेखां�कत ��iया-िविध के अनुसार क� जाएगी। आईएसओ/आईईसी 10373-1 म� यथा प�रभािषत एचवी और एचड0 � यू पैरामीटस" (अथा"त एि%सस बी के साथ वंकन हतुे 2 एमएम और 20 एमएम तथा एि%सस ए के साथ वंकन हेतु 1 एमएम और 10 एमएम) का �योग �कया जाएगा। एि%सस ए और एि%सस बी �C येक के साथ 250 वंकन सिहत क� गई जांच के उपरांत काड" इले% ̂ ािनक तौर पर काय" करना जारी रखेगा तथा ऊपर एवं नीचे क� तरफ काड" कांटे% �स यथावत बने रह�गे। िनE निलिखत के िलए काड� क� परी�ण 1000 वंकन चi के उपरातं क� जाएगी, अथा"त :- (i) काड" के आयाम। (ii) काड" वारपेज और सतह िव�पण। (iii) आईएसओ 7816-3 के अनु�प इंटरफेस िडवाइस (आईएफडी) अथवा आईएसओ 14443-4 अनु�प �ो% सीिमटी कपmलंग िडवाइस (पीसीडी), यथािMथित, के अंतवsशन के उपरांत आंसर टू �रसेट (एटीआर) अथवा आंसर टू सेले% ट (एटीएस) क� उपिMथित। (iv) आईसीसी हतुे सभी कांटे% ट पेड के िलए कांटे% ट �ितरोध सीमाP के भीतर होगा । ¹Hkkx IIµ[k.M 3(i)º Hkkjr dk jkti=k % vlk/kj.k 19 (च) गZ यागZ यागZ यागZ याZ मZ मZ मZ मकककक मरोडमरोडमरोडमरोड तनावतनावतनावतनाव –––– काड� का आईएसओ/आईईसी 10373-1, खंड 5.9 म� यथा-रेखां�कत गC याC मक मरोड तनाव परी�ण �कया जाएगा। इसके िलए पैरामीटस" आईएसओ/आईईसी 10373-1 म� यथा-उि�लिखत लागू ह गे। चi�य मरोड तनाव अनु�योग के उपरांत काड� क� िनE निलिखत परी�ण �कया जाएगा, अथा"त :- (i) काड" का आयाम। (ii) काड" वारपेज और सतही िव�पण। (iii) आईएसओ 7816-3 के अनु�प इंटरफेस िडवाइस (आईएफडी) अथवा आईएसओ 14443-4 अनु�प �ो% सीिमटी कपmलंग िडवाइस (पीसीडी), यथािMथित, के अंतवsशन के उपरांत आंसर टू �रसेट (एटीआर) अथवा आंसर टू सेले% ट (एटीएस) क� उपिMथित। (iv) आईसीसी हतुे सभी कांटे% ट पेड के िलए कांटे% ट �ितरोध सीमाP के भीतर होगा। (छ) यूवीयूवीयूवीयूवी मBमBमBमB रखेरखेरखेरखे जानेजानेजानेजाने परपरपरपर ि*थरताि*थरताि*थरताि*थरता –––– काड" सामgी क� पूव" म�ु�त परत म� िनE निलिखत प�रिMथितय के अंतग"त मु�ण गुणवC ता म� कोई दिृOकोचर �य नह3 होगा, अथा"त :- (i) 254एनएम वेवल�थ पर 0.12 एमड0 � यू/एमएम2 क� यूवी इरsिडएंस के अधीन 21 िमनट तक यूवी �काश म� रखे जाने पर। (ii) काड" को आईएसओ/आईईसी 10373-1, खंड 5.11 म� यथा-प�रभािषत परी�ण ��iया-िविध के अनुसार ऐसे यूवी �काश �ोत म� रखा जाएगा। अरि�त चi के उपरांत, काड" क� िनE निलिखत जांच क� जाएगी, अथा"त :- (क) काड" का आयाम। (ख) काड" वारपेज और सतह िव�पण। (ग) वंकन कठोरता परी�ण। (घ) आईसीसी हतुे सभी संिवदा के िलए सीमाP के भीतर संिवदा �ितरोध। (ङ) पूव" मु��त परत हतुे दaृय मु�ण गुणवC ता म� कोई दिृOगोचर �य, रंग उड़ना, सतह क� बनावट म� बदलाव अथवा लेिमनेशन हटना, नह3 होगा। (ज) मु[णमु[णमु[णमु[ण गुणवZ तागुणवZ तागुणवZ तागुणवZ ता ---- (क) पूव" म�ु�त परत के दaृय आभास हतुे मु�ण का सC यापन �कया जाएगा, िजसम� िनE निलिखत प�रिMथितय म� कोई दिृOगोचर �य, रंग उड़ने, सतही बनावट म� बदलाव, सतही रंग म� प�रवत"न और अवांिछत रंग िच@ ह का उभार नह3 होना चािहए, अथा"त :- (i) 10 �ितशत सापे� आ�"ता के साथ 0°स.े तापमान। (ii) 90 �ितशत सापे� आ�"ता के साथ 46°स.े तापमान। (ख) तापमान और सापे� आ�"ता पया"वरण िनयं�ण चैE बस" म� उC प@ न क� जाएगी और काड� को समदaृ य पया"वरण प�रिMथितय म� 20 िमनट तक रखा जाएगा। काड� को ऐसी प�रिMथितय म� रखे जाने के उपरांत काड" सामgी क� पूव" मु��त परत संबंधी मु�ण गुणवC ता का दaृय िनरी�ण �कया जाएगा। )झ( इलेिHKकलइलेिHKकलइलेिHKकलइलेिHKकल कांटेH \सकांटेH \सकांटेH \सकांटेH \स ((((केवलकेवलकेवलकेवल आईसीसीआईसीसीआईसीसीआईसीसी अथवाअथवाअथवाअथवा कांटेH टकांटेH टकांटेH टकांटेH ट * मा* मा* मा* माट�ट�ट�ट� काड]काड]काड]काड] केकेकेके िलएिलएिलएिलए लागूलागूलागूलागू) ) ) ) ---- (1) काड� म� आईएसओ/आईईसी 7816-2 म� यथा उि�लिखत M थान पर िनE निलिखत संिवदा �दान क� जाएगी, अथा"त :- (i) सी1 : िव�ुत आपू�त" इनपुट (वीसीसी)। (i) सी2 : �रसेट िसx नल इनपुट (आरएसटी)। (ii) सी3 : % लॉक िसx नल इनपुट (सीएलके)। 20 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)] (iii) सी5 : gाऊंड (जीएनडी)। (iv) सी7 : बाइडायरे% शनल सी�रयल डाटा (आई/ओ)। (2). इनम� से �C येक कांटे% ट के िलए अिधकतम और @ यूनतम वत"मान तथा संभािवत िMथितय को आईएसओ/आईईसी 7816-3 म� यथा प�रभािषत �कया गया ह।ै (ञ) काड�काड�काड�काड� कांटेH \सकांटेH \सकांटेH \सकांटेH \स क.क.क.क. यांि:कयांि:कयांि:कयांि:क सुदढ़ृतासुदढ़ृतासुदढ़ृतासुदढ़ृता ((((केवलकेवलकेवलकेवल आईसीआईसीआईसीआईसीसीसीसीसी, , , , अथवाअथवाअथवाअथवा कांटेH टकांटेH टकांटेH टकांटेH ट * मा* मा* मा* माट�ट�ट�ट� काड]काड]काड]काड] केकेकेके िलएिलएिलएिलए लागूलागूलागूलागू) ) ) ) ---- (i) काड" अपनी सतह पर �य, इसम� िनिहत �कसी संघटक का �ितरोधी होना चािहए, और यह सामा@ य उपयोग, भ� डारण तथा रख-रखाव के दौरान सुरि�त रहना चािहए। (ii) �C येक कांटे% ट सतह तथा कांटे% ट �े� (सE पूण" गेलवेिनक सतह) 1 एमएम u यास क� M टील ग�द के समक� काय"गत दाब और 1.5 एन का बल लगाए जाने पर �ितgM त नह3 होगी। (iii) यह परी�ण आईएसओ 7816-3 अनुपालना रीडर म� एटीआर क� मौजूदगी हतुे काड" काया"C मक होने के िलए यथा उि�लिखत 5 िमनट तक उपयु"% त दबाव ड़ालकर क� जाएगी। (ट) काड�काड�काड�काड� कांटेH \सकांटेH \सकांटेH \सकांटेH \स काकाकाका इलेिHKकलइलेिHKकलइलेिHKकलइलेिHKकल ितरोध ितरोध ितरोध ितरोध ((((केवलकेवलकेवलकेवल आईसीसीआईसीसीआईसीसीआईसीसी, , , , अथवाअथवाअथवाअथवा कांटेH टकांटेH टकांटेH टकांटेH ट * मा* मा* मा* माट�ट�ट�ट� काड]काड]काड]काड] केकेकेके िलएिलएिलएिलए लागूलागूलागूलागू) ) ) ) –––– काड" कांटे% ट पैड, जैसा�क आईएसओ/आईईसी 7816-2 म� प�रभािषत �कया गया ह,ै का कांटे% ट �ितरोध एक ही कांटे% ट पैड से 1.5 एमएम क� दरूी पर दो िब@ दPु के बीच 0.5 Ω स ेकम होना चािहए। काड" क� सभी पांच कांटे% ट क� परी�ण कांटे% ट के भीतर M थल पर इस दM तावेज के खंड 13 म� �कए गए िविनदsशन के अनुसार क� जाएगी। III. तैयार Fकए गए काड� क. सतह पर म[ुण हेतु िविनदXशन तैयार Fकए गए काड� क. सतह पर म[ुण हेतु िविनदXशन तैयार Fकए गए काड� क. सतह पर म[ुण हेतु िविनदXशन तैयार Fकए गए काड� क. सतह पर म[ुण हेतु िविनदXशन ---- ((((कककक)))) तैयार काड] पर मु[ण हेतु अपे�ाएं तैयार काड] पर मु[ण हेतु अपे�ाएं तैयार काड] पर मु[ण हेतु अपे�ाएं…
1. Short title and commencement. - (1) These rules may be called the Central Motor Vehicles (Second Amendment) Rules, 2019.
(2) They shall come into force on the 1 st day of October, 2019.
2. In the Central Motor Vehicles Rules, 1989,-
(a) in rule 16, –
(i) in sub-rule (1), for the word and figure “Form 6”, the following shall be substituted, namely:- “in form of a laminated card type without a chip or Smart Card type in Form 7 conforming to the specifications stipulated in Annexure XI”;
(ii) in sub-rule (2), for the words “laminated card type or Smart Card type driving license, such”, the following words shall be substituted, namely:- “Smart Card type driving license, such”;
(iii) sub-rule (3) shall be omitted;
(b) in rule 18, in sub-rule(1) for ‘clause (b)’, the following ‘clause’ shall be substituted, namely: - “(b) applicant’s recent passport size photograph,”;
(c) in rule 32, in the ‘Note’, for ‘clause 1’, the following ‘clause’ shall be substituted, namely: - 22 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)] “1. Where a laminated card without chip or Smart Card type driving licence is issued in Form 7, an additional fee of two hundred rupees shall be levied.”;
(d) in rule 48, for the words and figures “Form 23 or Form 23A”, the following words and figures shall be substituted, namely:- “Form 23A conforming to the specifications stipulated in Annexure XI”;
(e) in rule 81, for ‘Note 2’, the following ‘Note’ shall be substituted, namely: - “Note 2. Where the certificate of registration issued is in the form of laminated card without chip or Smart Card type driving licence, an additional fee of two hundred rupees shall be charged except in the case of issue of fresh certificate of registration after cancellation of hire purchase or lease or hypothecation agreement.”;
(f) the “FORM 6” shall be omitted;
(j) for ‘FORM 7’, the following ‘Form’ shall be substituted, namely:- “FORM 7 [(See rule 16 (1) and (2)] FORM FOR DRIVING LICENCE (LAMINATED CARD WITHOUT CHIP OR SMART CARD) VISUAL INSPECTION ZONE A. The design of the card on the front side shall include the following data fields in visual form - B. The design of the card on the reverse side shall include the following data fields in visual form - ¹Hkkx IIµ[k.M 3(i)º Hkkjr dk jkti=k % vlk/kj.k 23
1. The details of the features on the card shall be as under, namely:- A. For front side: B. For reverse side 24 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
2. Specifications.-
(a) Card Size - 85.6mm x 54.02 mm +/- 2 mm; Thickness minimum 0.7 mm
(i) Card in the form of either laminated card type without chip; or as per the defined template in the form of ICC (Integrated Circuit Card) compliant to ISO/IEC 7816-Part 1, 2, 3, 4, 8 and 9, IS16695 (Part 1: 2018) Smart Card Template Architecture Part 1: Basic Command Set (commonly known as SCOSTA Contact Smart Card);
(ii) PICC (Proximity Integrated Circuit Card), if provided, compliant to ISO/IEC 14443- Part 1, 2 3 and 4, ISO/IEC 7816-Part 4, 8 and 9, IS16695 (Part 1: 2018) Smart Card Template Architecture Part 1: Basic Command Set (commonly known as SCOSTA Contactless Smart Card), with card dimensions compliant to ISO/IEC 7810 ID-1 standard.
(b) Font Style and Size specifications Front Side Reverse Side Sr. No. Features Font Name Size Sr. No. Features Font Name Size
1. State/UT Code Myriad Pro Regular 7pt 1. Driving Licence Number Myriad Pro Bold 8pt
2. National Emblem Symbol 7.37mm x
12.28mm
2. QR code (As specified by Central Government) NA 15mm x 15mm
3. Card Header Myriad Pro Bold 9pt 3. Invalid Carriage # (Regn. Numbers) Myriad Pro Regular 7pt
4. Driving Licence Number Myriad Pro Bold 9pt 4. Hazardous Validity# Myriad Pro Regular 7pt
5. IC Chip (if opted for) NA NA 5. Hill Validity # Myriad Pro Regular 7pt
6. Issue Date Myriad Pro Regular 7pt 6. Vehicle class table (Class of Vehicle, Code, Issued by, Date of Issue, Vehicle Category, Badge Number # , Badge Issued Date# , Badge Issued by # ) Myriad Pro Regular 5pt
7. Validity (NT) Myriad Pro Regular 7pt 7. Emergency Contact Number Myriad Pro Regular 6pt
8. Validity(TR) # Myriad Pro Regular 7pt 8. Licensing Authority Myriad Pro Regular 6pt
9. Name Myriad Pro Regular 7pt 9. Form 7 Rule 16(2) Myriad Pro Regular 6pt
10. Date of Birth Myriad Pro Regular 7pt
11. Blood Group Myriad Pro Regular 7pt
12. Organ Donor Myriad Pro Regular 7pt
13. Son/Daughter/ Wife of Myriad Pro Regular 7pt
14. Address Myriad Pro Regular 7pt
15. Date of First Issue Myriad Pro Regular 6pt
16. Holder’s Signature Myriad Pro Regular 5pt
17. Photograph NA 14.82 mm x
14.82 mm # : Both Label and Value would be blank in cases where they are not applicable or have not been opted for ¹Hkkx IIµ[k.M 3(i)º Hkkjr dk jkti=k % vlk/kj.k 25
(c) Background Colour Details Front Side Reverse Side Sr. No Hex Code Print colour Sr. No. Hex Code Print colour C1. #f8951d C: 0 M: 49 Y: 100 K:0 C1. #ddf1fa C:12 M: 1 Y:1 K:0 C2. Gradient Color Top: #e7f5f5 Bottom:#a3daf7 Gradient Color Top:C:8 M: 0 Y:3 K:0 Bottom:C:33 M:1 Y:0 K:0 C2. Gradient Colour Top: #e7f5f5 Bottom:#a3daf7 Gradient Colour Top: C:8 M: 0 Y:3 K:0 Bottom:C:33 M:1 Y:0 K:0 C3. #edf8fc C:6 M: 0 Y:1 K:0 C3. #edf8fc C:6 M: 0 Y:1 K:0 MACHINE READABLE ZONE (applicable only if opted for Smart Card) The concerned State Governments shall provide the following features of the licence in the Machine Readable Zone, namely:- Sr. No. Field
1. DL Holder Personal Details : Driving Licence Number (DL) Name of the DL Holder Full Name of the DL Holder Gender Guardian(Mother/Father/Husband) Name Relation with Guardian (e.g.: S/o, W/o , D/o) Date of Birth (in ddmmyyyy format) First Identification Mark Second Identification Mark Blood Group Mobile Number Email Id Alternate Mobile Number Emergency Contact Number Permanent Address PINCODE of Permanent Address State Code In Permanent Address District Name in Permanent Address Sub-division/Taluk name in Permanent Address Village Name in Permanent address Present Address State Code in Present address PINCODE of Present address District Name in present Address Sub-division/Taluk Name in present Address Village Name in Present address
2. Licence details : Valid From (Transport) (in ddmmyyyy format) Valid Till (Transport) (in ddmmyyyy format) Valid From (Non-Transport) (in ddmmyyyy format) Valid From (Non-Transport) (in ddmmyyyy format) 26 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)] First Date of DL Issuance (in ddmmyyyy format) First (Original) Issuing Authority Date of Hazardous Validity (in ddmmyyyy format) Date of Hill Region validity (in ddmmyyyy format) Authority who issued Transport Authorization Transport Authorization Number Transport Authorization date (in ddmmyyyy format) Invalid carriage Vehicle Registration Number INVALID Carriage 2nd Vehicle Registration Number , if any Invalid carriage 3rd Vehicle Registration Number , if any
3. Class of Vehicle details : Class of Vehicle (COV) Class of Vehicle Issue Date (in ddmmyyyy format) Class of vehicle – Issued By (Name & Designation) Badge No. Badge Issue Date (in ddmmyyyy format) Badge Issued by –LA Office
4. Image details : Photograph of DL Holder Signature of DL Holder
5. Enforcement details : Challan/Inward Number Challan Date (in ddmmyyyy format) Endorsement Authority ID Endorsement Authority Name Section/ Rule Violated Disqualification Type (Suspended/Cancelled) Disqualification period from (in ddmmyyyy format) Disqualification period Up to (in ddmmyyyy format) Class of Vehicle that is suspended/Cancelled Settlement date Review Date (in ddmmyyyy format) Review Authority Name Remarks .”;
(h) the “FORM 23” shall be omitted;
(i) for ‘FORM 23A’, the following ‘Form’ shall be substituted, namely: - “FORM 23A [See rule 48] CERTIFICATION OF REGISTRATION (LAMINATED CARD WITHOUT CHIP OR SMART CARD) VISUAL INSPECTION ZONE ¹Hkkx IIµ[k.M 3(i)º Hkkjr dk jkti=k % vlk/kj.k 27
1. (A). The design of the card on the front side shall include the following data fields in visual form – (B). The design of the card on the reverse side shall include the following data fields in visual form. (C). The details of the features on the card shall be as under, namely:-
(a) For front side: 28 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(b) For reverse side:
2. Specifications.-
(a) Card Size - 85.6mm x 54.02 mm +/- 2 mm; Thickness minimum 0.7 mm
(i) Card in the form of either laminated card type without chip; or as per the defined template in the form of ICC (Integrated Circuit Card) compliant to ISO/IEC 7816-Part 1, 2, 3, 4, 8 and 9, IS16695 (Part 1: 2018) Smart Card Template Architecture Part 1: Basic Command Set (commonly known as SCOSTA Contact Smart Card);
(ii) PICC (Proximity Integrated Circuit Card) if provided, compliant to ISO/IEC 14443- Part 1, 2 3 and 4, ISO/IEC 7816- Part 4, 8 and 9, IS16695 (Part 1: 2018) Smart Card Template Architecture Part 1: Basic Command Set (commonly known as SCOSTA Contactless Smart Card), with card dimensions compliant to ISO/IEC 7810 ID-1 standard.
(b) Font Style and Size specifications Front side Reverse side Sr. No. Features Font Name Size Sr. No. Features Font Name Size
1. Category (NT/ TR)- XY Myriad Pro Regular 7pt 1. Category (NT/TR)- XY Myriad Pro Regular 7pt
2. State / UT Code- AB Myriad Pro Regular 7pt 2. State / UT Code- AB Myriad Pro Regular 7pt
3. Golden National Emblem Symbol 7.37mm x
12.28mm
3. Vehicle Class Myriad Pro Regular 6pt
4. Card Header Myriad Pro Bold 8pt 4. Vehicle Type (e.g. LMV/ HMV/HGV etc) Myriad Pro Regular 6pt
5. IC Chip (if opted for) NA NA 5. Registration Number Myriad Pro Regular 6pt
6. Fuel Myriad Pro Regular 7pt 6. QR Code (As specified by the Central Government) NA 15 mm x 15mm
7. Emission Norms Myriad Pro Regular 7pt 7. Month & Year of Mfg. Myriad Pro Regular
5.5pt ¹Hkkx IIµ[k.M 3(i)º Hkkjr dk jkti=k % vlk/kj.k 29
8. Registration Number Myriad Pro Bold 7pt 8. Number of Cylinders Myriad Pro Regular
5.5pt
9. Date of Registration Myriad Pro Bold 7pt 9. Number of Axle# Myriad Pro Regular
5.5pt
10. Registration Validity* (to be printed “As per Fitness” for Transport/ Commercial vehicle) Myriad Pro Bold 7pt 10. Maker’s Name Myriad Pro Regular
5.5pt
11. Chassis Number Myriad Pro Regular 7pt 11. Model Name Myriad Pro Regular
5.5pt
12. Engine /Motor Number Myriad Pro Regular 7pt 12. Colour Myriad Pro Regular
5.5pt
13. Owner Name Myriad Pro Regular 7pt 13. Body Type Myriad Pro Regular
5.5pt
14. Son/ Daughter/ Wife of (in case of Individual Owner) Myriad Pro Regular 7pt 14. Seating (in all) Capacity Myriad Pro Regular
5.5pt
15. Address Myriad Pro Regular 7pt 15. Standing Capacity# Myriad Pro Regular
5.5pt
16. Card Issue Date Myriad Pro Regular 6pt 16. Sleeper Capacity # Myriad Pro Regular
5.5pt
17. Owner Serial Myriad Pro Regular 7pt 17. Unladen Weight (kg) Myriad Pro Regular
5.5pt
18. Laden Weight #
(kg) Myriad Pro Regular
5.5pt
19. Gross Combination Weight# (kg) Myriad Pro Regular
5.5pt
20. Cubic Capacity (Kw) Myriad Pro Regular
5.5pt
21. Horse Power (BHP) Myriad Pro Regular
5.5pt
22. Wheel Base (mm) Myriad Pro Regular
5.5pt
23. Financer name # Myriad Pro 5.5pt
24. Registering Authority's Name Myriad Pro 5.5pt
25. Form 23A Myriad Pro Regular 6pt # : Both Label and Value would be blank in cases where they are not applicable or have not been opted for
(c) Background Colour Details Front Side Reverse Side Sr. No. Hex Code For Print Media Sr. No. Hex Code For Print Media C1. #44c7f1 C:60 M:0 Y:1 K:0 C1. #44c7f1 C:60 M:0 Y:1 K:0 C2. #f8951d C:0 M: 49 Y:100 K:0 C2. #f8951d C:0 M: 49 Y:100 K:0 C3. Gradient Colour Top: # e7f5f5 Bottom:#a3daf7 Gradient Colour Top: C:8 M: 0 Y:3 K:0 Bottom:C:33 M:1 Y:0 K:0 C3. Gradient Colour Top: # e7f5f5 Bottom:#a3daf7 Gradient Colour Top: C:8 M: 0 Y:3 K:0 Bottom:C:33 M:1 Y:0 K:0 C4. Gradient Colour Top: #ffffff Bottom:#cbe5ef Gradient Colour Top: C:0 M: 0 Y:3 K:0 Bottom:C:9 M:2Y:3 K:0 C4. Gradient Colour Top: #ffffff Bottom:#cbe5ef Gradient Colour Top: C:0 M: 0 Y:3 K:0 Bottom:C:9 M:2Y:3 K:0 30 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)] MACHINE READABLE ZONE (applicable only if opted for Smart Card) The concerned State Governments shall provide the following features of the Registration Certificate in the Machine Readable Zone, namely:- Sr. No. Field
1. Registration Details : Registration Number Registration Date (in ddmmyyyy format) Purchase Date (in ddmmyyyy format) Registration Type (N, A, O, D) Registration Validity (in ddmmyyyy format) (To be stored ”As per Fitness” for Transport / Commercial vehicle) Dealer Name Registering Authority Name
2. Personal Details : Owner Name Son/Wife /Daughter of (if Individual) Owner Current Address Owner Permanent Address Owner Serial No. Ownership Type
3. Vehicle Details : Vehicle Class Maker/Manufacturer Model No. of Cylinder Horse Power (format 99999.99) Seating Capacity Standing Capacity Sleeper Capacity Unladen Weight (kg) Laden Weight (kg) Gross Combination Weight, if applicable (kg) Wheelbase (mm) Cubic Capacity (format 99999.99) Floor Area (sq m) (format 999.999) Fuel Chassis No Engine No Body Type Colour Manufacturing Month & Year (mmyyyy) ¹Hkkx IIµ[k.M 3(i)º Hkkjr dk jkti=k % vlk/kj.k 31 Sale Amount Emission Norms Height (mm) Length (mm) Width (mm) AC Fitted (Y/N) Video Fitted (Y/N) Audio Fitted (Y/N)
4. Axle Details of Transport Vehicle : Number of Axle Number of Tyre – Front Axle Number of Tyre – Rear Axle Number of Tyre – Tandem Axle Number of Tyre – Other Axle Front Axle (Description and Size of Tyre) Rear Axle (Description and Size of Tyre) Tandem Axle (Description and Size of Tyre) Other Axle (Description and Size of Tyre) Front Axle Weight (kg) Rear Axle Weight (kg) Tandem Axle Weight (kg) Other Axle Weight (kg) Overhang Rearhang
5. Additional Details of Attached Trailer / Semi-Trailer (if applicable) : Number of attached Semi-Trailers Attached Trailer(s) Registration Mark
6. Additional Details of Linked Horse Vehicle No. (if this RC is of Semi-Trailer/Trailer) : Horse Vehicle Registration Mark, if applicable
7. Hypothecation Details*3 : Name of Financier
8. Challan Details*40 : Challan No. Accused category (D – Driver, C – Conductor, O – Owner) Section (s) (code only with delimiter “,”, if more than 1) Challaning Officer Name Location Challan Date & Time in ddmmyyyy /hh-mm format Disposing Officer Name Penalty Receipt No. 32 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
9. Permanent Permit Details : Permit Number Permit Type (Description) Permit Issuing Authority Name Validity From (in ddmmyyyy format) Validity Up to (in ddmmyyyy format) Replacement Date (in ddmmyyyy format) Area (e.g. Local, Distt, Region, State etc.) Route From Route Up to Stages Route Length (km) Number of Trips per day
10. Details of alternative or additional Semi-Trailer(s) registered with an articulated vehicle (Registration No same as articulated vehicle) : Body Type Unladen Weight (kg) Laden Weight (kg) Chassis No Front Axle (Number, Description and Size of Tyre) Rear Axle (Number, Description and Size of Tyre) Tandem Axle (Number, Description and Size of Tyre) Other Axle (Number, Description and Size of Tyre) Front Axle Weight (kg) Rear Axle Weight (kg) Tandem Axle Weight (kg) Other Axle Weight (kg)
11. Retro Fitting Details : Kit Manufacturer Kit Type Kit Workshop Kit Serial Number Kit PUCC Norms Workshop License No Fitment Date (in ddmmyyyy format) Hydro Test Date (in ddmmyyyy format) Cylinder Serial Number .”; ¹Hkkx IIµ[k.M 3(i)º Hkkjr dk jkti=k % vlk/kj.k 33
(j) for ‘Annexure XI’, the following ‘Annexure’ shall be substituted, namely: - “Annexure XI [see clause(s) of rule 2, rule 16 and rule 48] I. Specifications of laminated card type without chip or Smart Card type Driving Licence and Registration Certificate. -
(a) Integrated Circuit Card (ICC, commonly known as contact smart card) or Proximity Integrated Circuit Card (PICC, commonly known as contactless smart card).
(b) ICC shall be compliant to ISO/IEC 7816-1, 2 and 3 while PICC shall be compliant to ISO/IEC 14443-1, 2, 3 and 4.
(c) Both ICC and PICC shall also be compliant to ISO/IEC 7816-4, 8 and 9, IS-16695 Part I, 2018 (commonly known as SCOSTA).
(d) Minimum 10 years data retention for the non-volatile memory in the form of EEPROM or FLASH.
(e) Minimum 300,000 write cycles endurance for the non-volatile memory.
(f) The hardware (controller) shall be in compliance and certified to be EAL4+ (or higher) common criteria certificate along with security target of evaluation of microcontroller (in case of ROM based OS implementation) or of the microcontroller along with Boot loader/Flash loader/Smart Program/Boot Program (in case of Flash based OS implementation) under the Common Criteria Certificate. The common Criteria Certificate refers to BSI-CC-PP-0035-2007/BSI-CC-PP-0084- 2014 (or newer) Protection profile.
(g) The operating system shall be loaded in the Flash Memory or in the ROM with the chip at wafer level in the facility fully owned by the chip manufacturer and shall be locked at that facility in a way that it cannot be altered, modified, erased or deleted either selectively or wholly.
(h) Operating ambient temperature range -25C to +55C.
(i) For Poly Vinyl Chloride (PVC): Glossy surface, Poly Vinyl Chloride (PVC)/Acrylonitrile Butadiene Styrene (ABS)/PetG plastic construction, with overlay to allow colour dye sublimation printing.
(j) For Polycarbonate Card: Multi-layered card construction using pure polycarbonate layer, fused (laminated) together with heat and pressure without any kind of glue or adhesive. Card Body material including outer overlay shall be capable of personalisation through Laser engraving. II. Material Specifications for Driving License and Registration Certificate. -
(a) Dimension of the Card.- The cards used for the Driving License and Registration Certificate shall be compliant to ISO/IEC 7810 standard as defined for ID-1 unused and returned cards. The tolerances, edge burrs etc. shall be as defined for the ID-1 cards in ISO/IEC 7810 section 5. All dimensions of the card shall be measured as per the ISO/IEC 10373-1 standard as defined in section 5.2 under the standard testing conditions as defined in ISO/IEC 10373-1.
(b) Card Warpage and Surface Distortion. - The maximum distance from a flat rigid plate to any portion of the convex surface of the card shall not be greater than 1.5 mm including the card thickness. Further, the difference between the maximum and minimum thickness of the finished card shall not be more than 0.10 mm. For measuring the maximum and minimum thicknesses, the contact chip shall also be considered. Thus, no point of the entire IC contact surface shall be higher than 0.10 mm above or lower than 0.10 mm below the adjacent surface of the card. The test shall be carried out using the standard measurement method as described in ISO/IEC10373-1.
(c) Card Material and Construction. - The cards shall be made of Polyvinyl Chloride (PVC), Acrylonitrile Butadiene Styrene (ABS) or PetG or Poly Carbonate (PC) plastic material unless specified otherwise. The card construction shall be made of bonded materials with inserts of the ISO7816-2 compliant contact chip (for ICC) if provided, or with inserts of the ISO144443 compliant contactless chip with associated antenna (for PICC), if provided. 34 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(d) Card Characteristics. - The card characteristics shall be as defined in ISO/IEC 7810 standard as outlined here:-
(i) Bending Stiffness. – (1). The bending stiffness shall be as defined in ISO/IEC 7810. The test procedures shall be as described in ISO/IEC 10373-1 section 5.7. For carrying out the bending stiffness test, the cards shall be exercised in the following four configurations, namely:-
(a) With the embedded chip facing upward and the edge of the card closer to the chip placed towards the clamping device.
(b) With the embedded chip facing upward and the edge of the card closer to the chip placed away from the clamping device.
(c) With the embedded chip facing downward and the edge of the card closer to the chip placed towards the clamping device.
(d) With the embedded chip facing downward and the edge of the card closer to the chip placed away from the clamping device.
(2). The maximum permitted bending deformation shall be identical in all the four configurations.
(ii) Resistance to chemicals. – Cards shall be resistant to the chemicals as described in ISO/IEC 7810 section 8.4. The chemical resistance shall be tested as per the procedure outlined in ISO/IEC 10373-1 section 5.4, using reagents both for short-term and long-term contamination.
(iii) Storage Requirements. – (1). The card characteristics as defined in this section of the document shall remain unaltered for the following range of temperature and humidity as storage requirements, namely:-
(a) Temperature range of 5-40°C.
(b) Relative humidity range of 10-85%.
(2). The cards shall be tested for the bending stiffness after exposing it to the following two environment conditions, namely:- (I) 5°C at 10%RH, and (II) 40°C at 85%RH.
(3). The exposure for each of these two conditions shall be for one hour in the environment. This test only establishes the card characteristics and does not establish any print quality characteristics, which are defined later.
(iv) Peel Strength. - The peel strength of the component layers of the card material shall be as per the minimum specified in ISO/IEC 7810 section 8.8. The peel strength shall be tested as per the procedure outlined in ISO/IEC 10373-1 section 5.4 with a peeling angle of 90°.
(v) Adhesion Resistance. – (a) When finished cards are stacked together in a stock of 5 cards and applied 1.5 Kg dead weight from the top, kept for 7 days at 40 ± 3°C, 80%RH, no card shall show any adverse effect such as delamination, discolouration or colour transfer to adjacent cards, changes to surface finish, transfer of material from one card to another and deformation. The physical dimension of the all cards shall remain as described in section 5 of this document.
(b) The cards shall be tested for easy separation by hand for randomly chosen cards in the middle of the stack and will be inspected visually for the colour transfer, discolouration, changes in the surface finish etc. The dimension of the cards, card warpage and surface distortion after each test shall be tested to be within the limits as described in this document. ¹Hkkx IIµ[k.M 3(i)º Hkkjr dk jkti=k % vlk/kj.k 35
(e) Dynamic Bending. - The cards shall be tested for dynamic bending as per the procedure outlined in ISO/IEC 10373-1 section 5.8. The hv and hw parameters shall be used as defined in ISO/IEC 10373-1 (i.e. 2mm and 20mm for bending along axis B, and 1mm and 10mm for bending along axis A). The cards shall continue to work electronically after the test is performed with 250 bending each along axis A and axis B and with card contacts facing upwards as well as downwards. The cards shall be tested after the cycle of 1000 bending tests for the following, namely:-
(i) The dimensions of the card.
(ii) Card warpage and surface distortion.
(iii) The presence of Answer to Reset (ATR) or Answer to Select (ATS) sequence after insertion in the ISO7816-3 compliant interface device (IFD) or ISO14443-4 compliant proximity coupling device (PCD), as the case may be.
(iv) The contact resistance being within the limits for all contact pads for an ICC.
(f) Dynamic Torsional Stress.-The cards shall be subjected to dynamic torsional stress test as outlined in ISO/IEC 10373-1 section 5.9. The parameters shall be as defined in ISO/IEC 10373-
1. After the cycle torsional stress application, the cards shall be tested for the following, namely:-
(i) The dimension of the card.
(ii) Card warpage and surface distortion.
(iii) The presence of Answer to Reset (ATR) or Answer to Select (ATS) sequence after insertion in the ISO7816-3 compliant interface device (IFD) or ISO14443-4 compliant proximity coupling device (PCD), as the case may be.
(iv) The contact resistance being within the limits for all contact pads for an ICC.
(g) Stability against UV Exposure.-The pre-printed layers of the card material shall show no visible degradation of the print quality under the following conditions, namely:-
(i) Exposure to UV lighting for 21 minutes at UV irradiance of 0.12 mW/mm 2 at 254nm wavelength.
(ii) The cards shall be exposed to such UV light source as per the testing procedure defined in ISO/IEC 10373-1 section 5.11. After the exposure cycle, the cards shall be tested for the following, namely:-
(a) The dimension of the card.
(b) Card warpage and surface distortion.
(c) Bending stiffness test.
(d) The contact resistance being within the limits for all contact pads for an ICC.
(e) Visual print quality for the pre-printed layers, which shall not show any visible degradation, discolouring, change of surface finish or delamination.
(h) Print Quality. – (a) The print shall be verified for the visual appearance of the pre-printed layers, which must not show any visible degradation, discolouring, change of the surface finish, change of the surface colours, and presence of visible unwanted colour marks under the following conditions, namely:-
(i) Temperature of 0°C with a relative humidity of 10%.
(ii) Temperature of 46°C with a relative humidity of 90%.
(b) The temperature and relative humidity shall be established in the environment control chambers and the cards shall be exposed for 20 minutes in the corresponding environment condition. After the exposure, the card shall be visually inspected for the print quality on the pre-printed layers of the card material. 36 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(i) Electrical Contacts (applicable for ICC, or contact smart cards only. – (1). The cards shall provide the following contacts at location as defined in ISO/IEC 7816-2, namely:-
(i) C1: supply power input (VCC).
(ii) C2: reset signal input (RST).
(iii) C3: clock signal input (CLK).
(iv) C5: ground (GND).
(v) C7: bidirectional serial data (I/O).
(2). The maximum and minimum currents and potential on each of these contacts are as defined in ISO/IEC 7816-3.
(j) Mechanical Strength of Card Contacts (applicable for ICC, or contact smart cards only). –
(i) The card should resist damage to its surface, to any components contained in it, and should remain intact during normal use, storage and handling.
(ii) Each contact surface and contact area (entire galvanic surface) shall not be damaged by a working pressure equivalent to a steel ball of diameter 1 mm applying a force of 1.5 N.
(iii) The test shall be carried out by applying the pressure as mentioned above for 5 minutes and checked for card being functional for the presence of ATR in an ISO7816-3 compliant reader.
(k) Electrical Resistance of Card contacts (applicable for ICC, or contact smart cards only). - The contact resistance of a card contact pad as defined in ISO/IEC 7816-2 should be less than 0.5 Ω between two points on the same contact pad at a distance of 1.5mm. The card shall be tested for all the five contacts as specified in section 13 of this document at random locations within the contact. III. Specifications for Printing on the finished card surface. –(a) Printing Requirements on finished cards. - The finished cards shall be as per the specifications outlined in this document. The finished cards shall then be subjected to personalisation – electronic as well as visual on the card surfaces. Typically, dye sublimation printing is used for visual personalisation. These tests shall be performed after printing on the card surfaces – both bottom as well as top, using the standard card printers being used in the field for visual personalisation. The printing of text and photograph for the testing shall be as typical of any driving license and vehicle registration certificate and as specified in the visual layout for the same.
(b) Ink Adhesion. - (i) The personalised printing on the cards shall show good quality ink adhesion as indicated below. (Ref: IPC-TM-650 Test Method Number 2.4.1 for Adhesion Tape testing).
(ii) With the tape and procedure as described in the test method, the evaluation shall be carried out. The visual examination of the tape used for the testing and the test area of the substrate will be carried out for the ink adhesion performance of the specimen in the following grades, namely:- Grade 1: No removal of ink (tape will not show any marking of the ink when peeled off). Grade 2: Slight removal of ink (tape will show markings of the ink but the ink impressions on tape adhesive side will not be readable) amounting to <10% of ink removal. Grade 3: High removal of ink (the ink impression on the tape adhesive side will be readable) amounting to more than 10% of ink removal.
(c) Exposure to the environmental parameters. - (i) The visually personalized cards shall be tested for ink adhesion after exposing it to the following two environment conditions, namely:- (A) 5°C at 10%RH; and (B) 40°C at 85%RH. ¹Hkkx IIµ[k.M 3(i)º Hkkjr dk jkti=k % vlk/kj.k 37
(ii) The exposure for each of these two conditions shall be for one hour in the environment and the ink adhesion test will be performed immediately after the exposure. The specimen shall show Grade 1 quality for both tests.
(d) Exposure to UV. - The visually personalised cards shall be exposed to UV lighting for 21 minutes at UV irradiance of 0.12 mW/mm 2 at 254nm wavelength as per the testing procedure defined in ISO/IEC 10373-1 section 5.11. Immediately after the exposure cycle, the visual personalisation shall be tested for the ink adhesion. The specimen shall show Grade 2 or Grade 1 quality for the test.
(e) Stacking and layering. – When visually personalised cards are stacked together in a stock of 5 cards and applied 1.5 Kg dead weight from the top, kept for 2 days at 40 ± 3°C, 80% RH, no printing on the card surfaces shall show any adverse effect discolouration or colour transfer to adjacent cards. The cards after subjecting to this test shall be tested for ink adhesion. The specimen shall show Grade 1 quality for the test.”. [F. No. RT-11028/24/2016-MVL] PRIYANK BHARTI, Jt. Secy.
Note : The principal rules were published in the Gazette of India, Extraordinary, Part II, Section 3, Sub-section (i) vide notification number G.S.R. 590(E), dated the 2nd June, 1989 and last amended vide notification G.S.R. 1225(E), date 20.12.2018. Uploaded by Dte. of Printing at Government of India Press, Ring Road, Mayapuri, New Delhi-110064 and Published by the Controller of Publications, Delhi-110054. 2019-03-07T11:16:36+0530 MANOJ KUMAR VERMA