3705 GI/2016 (1) jftLVªh laö Mhö ,yö&33004@99 REGD. NO. D. L.-33004/99 vlk/kj.k EXTRAORDINARY Hkkx III— [k.M 4
PART III—Section 4 izkf/dkj ls izdkf'kr PUBLISHED BY AUTHORITY la- 300] ubZ fnYyh] 'kqØokj] tqykbZ 22] 2016@vk"kk<+ 31] 1938 No. 300] NEW DELHI, FRIDAY, JULY 22, 2016/ASADHA 31, 1938 पᮝेोिलयम और ᮧाकृितक गसै िविनयामक बोडᭅ अिधसचूना नई ᳰद᭨ली, 22 जुलाई, 2016 फा .सं. इनᮨा/एसी/पीपीपीएल/1/13. — पेᮝोिलयम और ᮧाकृितक गैस िविनयामक बोडᭅ अिधिनयम, 2006 (2006 का 19) कᳱ धारा 61 ᳇ारा ᮧदᱫ शिᲦयᲂ का ᮧयोग करते ᱟए, एतारा िन᳜िलिखत िविनयम बनाता ह,ै नामत:-
1. सिंᭃ᳙ शीषᭅक और ᮧारंभण.
(1) इन िविनयमᲂ को पेᮝोिलयम और ᮧाकृितक गैस िविनयामक बोडᭅ (पेᮝोिलयम और पेᮝोिलयम उ᭜पादᲂ कᳱ पाइपलाइनᲂ के सामा᭠य वाहक या संिवदा वाहक के िलए पᱟचं संिहता) िविनयम, 2016 कहा जाएगा।
(2) ये सरकारी राजपᮢ मᱶ उनके ᮧकाशन कᳱ तारीख से ᮧवृत हᲂगे।
2. (1) इन िविनयमᲂ मᱶ जब तक ᳰक संदभᭅ मᱶ अ᭠यथा अपेिᭃत न हᲂ, (क) “पᱟचं ᳞व᭭था” का अथᭅ ह ैᮧािधकृत कंपनी और िशपर के बीच वह संिवदा द᭭तावेज िजसमᱶ िवशेष ᱧप से पेᮝोिलयम और पेᮝोिलयम उ᭜पादᲂ कᳱ पाइपलाइन तक पᱟचं कᳱ िनबंधन और शतᲄ को पᳯरभािषत ᳰकया गया हो और ᮧािधकृत कंपनी कᳱ वेबसाइट पर डाला गया हो;
(ख) “अिधिनयम” का अथᭅ ह ैपेᮝोिलयम और ᮧाकृितक गैस िविनयामक बोडᭅ अिधिनयम, 2006;
(ग) “िनयत ᳰदवस” का अथᭅ ह ै01 अᲦूबर, 2007 का ᳰदन, जबᳰक कᱶ ᮤ सरकार ने पेᮝोिलयम और ᮧाकृितक गैस िविनयामक बोडᭅ कᳱ ᭭थापना करने कᳱ अिधसूचना जारी कᳱ थी;
(घ ) "बैच” का अथᭅ ह ैिविनदᱷशᲂ के अनुसार पेᮝोिलयम उ᭜पाद कᳱ एक माᮢा को एक िचि᭠हत इकाई के ᱨप मᱶ पाइपलाइन के मा᭟यम से ले जाया गया;
(डं.) ”बोडᭅ” का अथᭅ ह ैपेᮝोिलयम और ᮧाकृितक गैस िविनयामक बोडᭅ अिधिनयम, 2006; के तहत ᭭थािपत पेᮝोिलयम और ᮧाकृितक गैस िविनयामक बोडᭅ (पीएनजीआरबी);
(च) “ᭃमता”:
i. "बुक कᳱ गई ᭃमता" का अथᭅ ह ै िशपर और ᮝांसपोटᭅर के बीच पᱟँच ᳞व᭭था के अनुसार पेᮝोिलयम और पेᮝोिलयम उ᭜पादᲂ कᳱ अिधकतम दिैनक माᮢा (एमडीयु) ᳰकसी भी ᳰदन ᳰकसी कंपनी के ᳰकसी एक ᳲबद ु पर पᱟंचाई जाए या एक िनकासी ᳲबद ुतक ले जाया जाए। 2 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III —SEC. 4] ii. “अनुबंिधत ᭃमता“ का अथᭅ ह ैदिैनक, मािसक या वाᳶषक आधार पर पाइपलाइन ᮧणाली के जᳯरए पᳯरवहन हतेु अनुबंिधत पेᮝोिलयम और पेᮝोिलयम उ᭜पादᲂ कᳱ माᮢा;
(छ) “अिभरᭃा ह᭭तांतरण मीटर” का अथᭅ है ऐसे उपकरण या उपकरणᲂ का समूह, िजनसे एक कंपनी से दसूरी कंपनी मᱶ अिभरᭃा के ह᭭तांतरण के िलए पेᮝोिलयम और पेᮝोिलयम उ᭜पादᲂ कᳱ माᮢा मापी जाती ह;ै (ज) “िववाद” का अथᭅ ह ै इन िविनयमᲂ या पᱟचं ᳞व᭭था के अंतगᭅत उ᭜पादᲂ कᳱ िविनदᱷशᲂ से संबंिधत या इनसे संबंिधत कंपिनयᲂ के बीच उ᭜प᳖ होने वाला िववाद या मतभेद;
(झ) “ᮧवेश ᭭थल” का अथᭅ ह ैवह ᭭थल जहां पर िशपर ᳇ारा सुपुदᭅ ᳰकए गए पेᮝोिलयम और पेᮝोिलयम उ᭜पादᲂ को पाइपलाइन मᱶ डाला जाता ह;ै (ञ) “िनकासी ᭭थल” का अथᭅ है वह ᭭थल जहां से पेᮝोिलयम और पेᮝोिलयम उ᭜पादᲂ को पᱟचं ᳞व᭭था के अनुसार िशपर को सुपुदᭅगी के िलए पेᮝोिलयम उ᭜पाद पाइपलाइन से िनकाले जाते हᱹ;
(ट) “ᮕेड” का अथᭅ ह ै पेᮝोिलयम और पेᮝोिलयम उ᭜पादᲂ का इसकᳱ रासायिनक संरचना और िवशेषताᲐ जैसे ᳰक इसके अनुसंधान संया )रॉन( , स᭨फर सामᮕी, एिडᳯटव सामᮕी के ᱧप मᱶ उसके िहमांक ᳲबद ूतथा उसकᳱ माᮢा या अनुपात के वगᱮकरण से है;
(ठ) "ᮕेड बᱹड " का अथᭅ ह ैपेᮝोिलयम और पेᮝोिलयम के उ᭜पाद के िलए ᭠यूनतम और अिधकतम ᭭वीकायᭅ संरचना, िवशेषताᲐ, माᮢा या उसके अनुपात कᳱ सीमा;
(ड) "इंटरफेस" का अथᭅ ह ैवह िम᮰ण जो ᳰक सामा᭠य पाइपलाइन संचालन मᱶ पेᮝोिलयम और पेᮝोिलयम उ᭜पादᲂ के िविभ᳖ िविशि᳥यᲂ वाले बैच मᱶ होता है;
(ढ) “ᮝांि᭭मस” दो बैचᲂ के बीच पहले या दसूरे उ᭜पाद के साथ िमि᮰त नहᱭ ᳰकया जा सकता ह ैऔर पाइप लाइन ᮧणाली से हटा ᳰदया जाता ह;ै (ण) "अिधकतम दिैनक माᮢा” का अथᭅ ह ैपेᮝोिलयम और पेᮝोिलयम उ᭜पादᲂ कᳱ अनुबंिधत, बुड या ᳰदन के चौबीस घंटे के भीतर सुपुदᭅगी के िलए िनधाᭅᳯरत अिधकतम माᮢा;
(त) “पेᮝोिलयम और पेᮝोिलयम उ᭜पाद पाइपलाइन” का अथᭅ ह ैकोई भी पाइपलाइन पेᮝोिलयम और पेᮝोिलयम उ᭜पादᲂ के पᳯरवहन हतेु ᮩांच लाइन या ᭭पर लाइनᱶ िजसमᱶ प᭥प मीटᳳरग इकाइयां ᮧारि᭥भक सुपुदᭅगी पर भंडारण सुिवधाएं, टैप ऑफ ᳲबद ुया टᳶमनल ᭭टेशनᲂ और पाइपलाइन के पᳯरचालन के िलए आव'यक अनवशोिषत इंटरफेस, संतुलन टᱹक और टᱹकेज, सामा᭠य वाहक या संिवदा वाहक के ᱧप मᱶ इससे जुड़े सभी बुिनयादी ढ़ांचे मᱶ शािमल ह ᱹपरंतु उन पाइपलाइनᲂ को छोड़कर जो ᳰक िविश᳥ उपभोकताᲐ के िलए पेᮝोिलयम और पेᮝोिलयम उ᭜पाद कᳱ आपूᳶत हतेु समᳶपत ह ᱹजो ᳰक िबᮓᳱ के िलए नही ह।ै बशतᱷ ᳰक ᮝांसपोटᭅर खुद का, भाड़े पर, आउटसोसᭅ या हॉि᭭पटेिबिलᳯट ᮧयोग से जुड़ी सुिवधाᲐ का ᮧयोग कर सकते ह ᱹउᲦ ᮧकार से जुड़ी सुिवधाएं गैर-भेदभाव आधाᳯरत हᲂ;
नोट: पᱟचं के ᮧयोजनाथᭅ, अिधकृत कंपनी ᳇ारा घोिषत सुिवधायᱶ जो ᳰक पेᮝोिलयम और पेᮝोिलयम पᳯरयोजना पाइप लाइन ᮧणाली के संचालन के िलए ह ैको सामा᭠य वाहक या संिवदा वाहक माना जाएगा;
(थ) “पेᮝोिलयम और पेᮝोल उ᭜पाद पाइपलाइन ख᭛ड” का अथᭅ ह ैएक ᮧवेश ᳲबद ुऔर एक िनकास ᳲबद ुया दो िनकास अंक के बीच या दो ᮧवेश ᳲबदᲐु के बीच पेᮝोिलयम और पेᮝोिलयम उ᭜पाद पाइपलाइन का एक िह᭭सा है;
(द) “िशपर” का अथᭅ है वह कंपनी िजसमᱶ उपभोᲦा भी शािमल ह ᱹजो ᳰक पेᮝोिलयम और पेᮝोिलयम उ᭜पाद के संचरण के िलए पाइपलाइन कᳱ ᭃमता का उपयोग करना चाहता है;
)ध( “संचरण हािन” (टीएल) का अथᭅ ह ैपेᮝोिलयम और पेᮝोिलयम उ᭜पाद कᳱ बेिहसाब वह माᮢा िजसमᱶ पाइपलाइन ᮧणाली के िनयिमत ᮧचालन और रखरखाव के दौरान या अिभरᭃा मीटर के ठीक न होने के कारण ᳯरसाव या ᳯरलीज शािमल होता ह;ै िजसके नुकसान कᳱ वजह का कारण कुछ भी हो,परंतु ᳰकसी भी तृतीय पᭃ के नुकसान कᳱ वजह से होने वाली न हो;
(न) “ᮝांसपोटᭅर” का अथᭅ ह ैवह कंपनी िजसे बोडᭅ या कᱶ ᮤ सरकार ᳇ारा पेᮝोिलयम और पेᮝोिलयम उ᭜पाद पाइपलाइन िबछाने, िनमाᭅण, ᮧचालन या िव᭭तार करने कᳱ िनयत तारीख से पूवᭅ ᮧािधकृत ᳰकया गया हो;
¹Hkkx III µ[k.M 4º Hkkjr dk jkti=k % vlk/kj.k 3 (प ) “माप कᳱ इकाई” का अथᭅ ह ैपेᮝोिलयम और पेᮝोिलयम उ᭜पाद कᳱ इकाई का माप िजसमᱶ एलपीजी को छोड़कर, ᳰकलोलीटर मᱶ 15 िडᮕी सेि᭨सयस पर उ᭜पाद घन᭜व के िलए परीᭃण और सामᮕी तािलका 53बी के िलए अमेᳯरकन सोसायटी (एएसटीएम) के अनुसार सुधार ᳰकया जाएगा और 15 िडᮕी सेि᭨सयस तक कᳱ माᮢा के िलए तािलका 54बी जैसा भी मामला हो मीᳯᮝक टन होगी। एलपीजी के िलए “माप कᳱ इकाई” मीᳯᮝक टन होगी:
बशतᱷ ᳰक लेखांकन के ᮧयोजनाथᭅ पेᮝोिलयम उ᭜पाद कᳱ बड़े पैमाने पर सही माप पाने के िलए 24 घंटे से अिधक के घन᭜व से सही ᳰकया जाना चािहए।
(2) इन िविनयमᲂ मᱶ ᮧयोग ᳰकए गए श᭣द और भाव, परंतु अिधिनयम मᱶ या िविनयम या इनके अधीन बनाए गए िनयमᲂ मᱶ पᳯरभािषत अथᭅ है, जैसा भी मामला हो, ᮓमशः अिधिनयम मᱶ या िनयमᲂ या िविनयमᲂ मᱶ ᳰदए गए के अनुसार हᲂगे।
3. ᮧयो᭔यता.— ये िविनयम उन सभी कंपिनयᲂ पर लागू हᲂगᱶ जो पेᮝोिलयम और पेᮝोिलयम उ᭜पाद पाइपलाइन का ᮧचालन कर रही ह ᱹ या ᳰकए जाने का इरादा रखती ह ᱹतथा वे िशपर जो ᳰक पेᮝोिलयम और पेᮝोिलयम उ᭜पाद पाइपलाइन के ᮝां᭭पोटᱷशन मᱶ संिल᳙ ह ᱹया संिल᳙ होने का इरादा रखते हᱹ।
4. ᭃमता कᳱ घोषणा
(1) पेᮝोिलयम और पेᮝोिलयम उ᭜पाद पाइपलाइन कᳱ ᭃमता जैसा ᳰक पᮝेोिलयम और ᮧाकृितक गैस िविनयामक बोडᭅ ᮝोिलयम उ᭜ पाद पेᮝोिलयम और पे (पाइपलाइन ᭃ मता िनधाᭅरण) िविनयम, 2010 के अनुसार िविन᳸द᳥ ᳰकया जाएगा।
(2) ᮝां᭭पोटᭅर पेᮝोिलयम और पेᮝोिलयम उ᭜पाद पाइपलाइन ᮧणाली के ख᭛ड, ᮧवेश व िनकासी ᭭थल ᭃमता ᮧणाली ख᭛ड ᭃमता और उपल᭣ध ᭃमता कᳱ घोषणा अनुसूची-1 मᱶ िविन᳸द᳥ ᮧपᮢ मᱶ तथा िनयिमत तौर पर ᮧ᭜येक माह कᳱ पहली तारीख को अपनी वेबसाइट पर डालेगा तथा इसकᳱ सूचना को बोडᭅ को भेजेगा िजसे वह अपनी वेबसाइट पर भी डालेगा।
(3) उप-िविनयम (2) के अंतगᭅत ᮝां᭭पोटᭅर के िलए घोिषत उपल᭣ध ᭃमता सामा᭠य वाहक या संिवदा वाहक के आधार पर उपयोगाथᭅ उपल᭣ध होगी या दोनᲂ के इ᭭तेमाल के िलए उपल᭣ध होगी तथा इसे िविनयम 13 के अंतगᭅत ᮧावधानᲂ के अनुसार आबंᳯटत ᳰकया जाएगा।
5. पᮝेोिलयम और पᮝेोिलयम उ᭜पाद मापद᭛ड
(1) ᮝां᭭पोटᭅ ᳰकए जाने वाले पेᮝोिलयम और पेᮝोिलयम उ᭜पाद िन᳜िलिखत उ᭜पाद िविनदᱷशᲂ के अनुसार हᲂगे:
(क) मोटर ि᭭पᳯरट (एमएस) – भारतीय मानक ᭣यूरो के नवीनतम सं᭭करण (बीआईएस)- मानक आईएस 2796 के अनुसार;
(ख) उᲬ गित डीज़ल (एचएसडी) – भारतीय मानक ᭣यूरो के नवीनतम सं᭭करण (बीआईएस) -आईएस 1460 के अनुसार;
(ग) सुपीᳯरयर केरोसीन तेल (एसकेओ) – भारतीय मानक ᭣यूरो के नवीनतम सं᭭करण (बीआईएस)-आईएस 1459 के अनुसार;
(घ) नै᭢था – उ᳒ोग गुणता िनयंᮢण मैनुअल के नवीनतम सं᭭करण (आईयूसीएम) के अनुसार (ङ) तरलीकृत पेᮝोिलयम गैस (एलपीजी) – भारतीय मानक ᭣यूरो के नवीनतम सं᭭करण (बीआईएस)- आईएस 4576 के अनुसार; तथा (च) एिवएशन टबाᭅईन ᭢यूल (एटीएफ) – भारतीय मानक ᭣यूरो के नवीनतम सं᭭करण (बीआईएस)-आईएस 1571 के अनुसार। नोट: उपरोᲦ दशाᭅए गए पेᮝोिलयम और पेᮝोिलयम उ᭜पाद िविनदᱷश, पेᮝोिलयम और पेᮝोिलयम उ᭜पाद पाइपलाइन के िनकास ᳲबदᲐु पर लागू हᲂगे। ᮧवेश ᳲबदᲐु के िविनदᱷश भंडारण / पारगमन के दौरान िगरावट के िलए ᭃितपूᳶत सिहत हᲂगᱶ।
(2) ᮧािधकृत कंपनी पेᮝोिलयम और पेᮝोिलयम उ᭜पादᲂ के िलए ᮕेड बᱹड तैयार करेगी और पेᮝोिलयम और पेᮝोिलयम उ᭜पाद पाइपलाइन के मा᭟यम से पᱟचंाए जाने वाले पेᮝोिलयम और पेᮝोिलयम उ᭜पादᲂ के िलए िन᳜िलिखत मापद᭛डᲂ को ᭟यान मᱶ रखेगी, नामत:- (क) ᮧ᭭तािवत ᮝां᭭पोटᭅ ᳰकए जाने हतेु पेᮝोिलयम और पेᮝोिलयम उ᭜पादᲂ का अपना ᮕेड;
(ख) पेᮝोिलयम और पेᮝोिलयम उ᭜पादᲂ कᳱ पुि᳥ अनुबंिधत ᭃमता का ᮕेड;
(ग) पेᮝोिलयम और पेᮝोिलयम उ᭜पादᲂ कᳱ पाइपलाइन पर डाउन᭭ᮝीम उपभोᲦा कᳱ आव᭫यकताएं;
(घ) पाइपलाइन ᮧणाली कᳱ तकनीकᳱ आव᭫यकताएं; और 4 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III —SEC. 4] (डं.) या तो पाइपलाइन ᮧणाली मᱶ पेᮝोिलयम और पेᮝोिलयम उ᭜पादᲂ का अथवा इस पाइपलाइन ᮧणाली से पेᮝोिलयम और पेᮝोिलयम उ᭜पादᲂ को ᮧा᳙ करने का अंतररा᭔यीय पाइपलाइनᲂ का ᮕेड।
(3) ᮝां᭭पोटᭅर बोडᭅ को अवगत कराते ᱟए िविनयम 4 के उप-िविनयम (2) मᱶ उि᭨लिखत अनुसार जैसा ᳰक अनुसूची II मᱶ ᮧपᮢ उपल᭣ध करवाया गया है बोडᭅ ᳇ारा ᮧािधकृत ᳰकए जाने कᳱ एक माह कᳱ अविध मᱶ अपनी वेबसाइट पर ᮕेड बᱹड ᮧकािशत करेगा:
बशतᱷ ᳰक कंपिनयां इन िविनयमᲂ के ᮧकाशन से पूवᭅ ᮕेड बᱹड इन िविनयमᲂ के ᮧकाशन कᳱ एक माह कᳱ अविध मᱶ ᮧकािशत करेगी।
(4) उप-िविनयम (2) मᱶ संदᳶभत ᮕेड बᱹड गैर-भेदभाव के आधार पर सभी िशपसᭅ पर लागू हᲂगे।
(5) ᮝां᭭पोटᭅर समय-समय पर पेᮝोिलयम और पेᮝोिलयम उ᭜पादᲂ के िलए ᮕेड बᱹड कᳱ समीᭃा कर सकते ह,ᱹ उ᳒ोग गुणवᱫा िनयंᮢण मैनुअल (आईयूसीएम)/ भारतीय मानक ᭣यूरो (बीआईएस) मᱶ यᳰद कोई पᳯरवतᭅन ᱟआ हो, तदनुसार ᮕेड बᱹड के िववरण को अ᳒तन करेगा और अपनी वेब साइट पर डालेगा। बशतᱷ इसके आगे जब कभी इस तरह के अपडेशन ᮝां᭭पोटᭅर ᳇ारा ᳰकए जाते ह ैऔर अपनी वेब साइट पर डालता है, ᮝां᭭पोटᭅर बोडᭅ को तुरंत सूिचत करेगा।
(6) पेᮝोिलयम और पेᮝोिलयम उ᭜पादᲂ मᱶ त᭜वᲂ के िलए एक सीमा अथाᭅᱫ िविश᳥ गुᱧ᭜व, िचपिचपाहट, वा᭬प दबाव, अनुमेय संदषूण ᭭तर के ᱨप मᱶ ि᳇तीय अनुसूची मᱶ दी जाएगी।
(7) ᮝां᭭पोटᭅर दबाव और तापमान कᳱ ᭭वीकायᭅ ᮰ेणी को दशाᭅते ᱟए पेᮝोिलयम और पेᮝोिलयम उ᭜पादᲂ के हाइᮟोिलस के अनुसार ᮧवेश ᭭थलᲂ पर पेᮝोिलयम और पेᮝोिलयम उ᭜पादᲂ के मानद᭛डᲂ को पᳯरभािषत करेगा और उसे ᮝां᭭पोटᭅर कᳱ वेबसाइट पर डाला जाएगा। इसके अलावा, िविभ᳖ उ᭜पादᲂ, अनुमािनत ᮝांि᭭मस उ᭜पिᱫ और पाइपलाइन हािन भᱫा आᳰद के िलए ᭠यूनतम आव᭫यक बैच का आकार भी ᮝांसपोटᭅर कᳱ वेबसाइट पर डाला जाएगा साथ ही यह "पᱟचँ ᳞व᭭था" का िह᭭सा बन जाएगा।
(8) िशपर उप-िविनयम (3) और अनुसूची II मᱶ िविन᳸द᳥ सभी मानद᭛डᲂ के अनुᱧप पेᮝोिलयम और पेᮝोिलयम उ᭜पादᲂ कᳱ आपूᳶत करेगा तथा ᮝां᭭पोटᭅर ᳇ारा उपरोᲦ उप-िविनयम (3) के तहत िविन᳸द᳥ तथा ᮝां᭭पोटᭅर ᳇ारा ᮧकािशत के मानद᭛डᲂ के अनुᱧप िनकासी ᭭थल पर पेᮝोिलयम और पेᮝोिलयम उ᭜पादᲂ कᳱ सुपुदᭅगी करेगा।
6. पᮝेोिलयम और पᮝेोिलयम उ᭜पादᲂ कᳱ ᭭वीकृित
(1) पेᮝोिलयम और पेᮝोिलयम उ᭜पाद पᳯरवहन के िलए ᮝांसपोटᭅर ᳇ारा ᭭वीकार ᳰकया जाएगा- (क) अनुसूची II मᱶ और िविनयम 5 के उप-िविनयम (3) के तहत केवल ᮝां᭭पोटᭅर ᳇ारा ᮧकािशत आव᭫यक गुणवᱫा व िविनदᱷशᲂ के तहत ᮧकािशत से यᳰद मेल खाते हᱹ;
(ख) केवल जब उ᭜पाद ᳰकसी भी पानी, गैर-हाइᮟोकाबᭅन सि᭥म᮰ण त᭜वᲂ और अ᭠य दोषᲂ से मुᲦ है;
(ग) एिडᳯट᭪स, अवरोधक, खᱭचाव ᭠यून करने वाले एजᱶट (डीआरए) और जंगरोधी िम᮰ण यᳰद, केवल िशपर के पेᮝोिलयम और पेᮝोिलयम उ᭜पादᲂ मᱶ िमलाया जाता ह ैतो िशपर ᳇ारा ᭭वीकायᭅ होगा, पेᮝोिलयम और पेᮝोिलयम उ᭜पाद िजसमᱶ ᳰक एिडᳯट᭪स इंजेट ᳰकया जाने वाला अवरोधक (सामा᭠य या ᳞ापाᳯरक नाम) कᳱ अिधकतम माᮢा मᱶ ᳰकसी ᮧकार के बदलाव पर िशपर को 30 ᳰदनᲂ का नोᳯटस ᳰदया जाएगा;
(घ) केवल तब जबᳰक पेᮝोिलयम और पेᮝोिलयम उ᭜पाद िशपर ᳇ारा सुपुदᭅ ᳰकए जाते ह ᱹया िशपर और ᮝां᭭पोटᭅर कᳱ पर᭭पर सहमित पर ᮝां᭭पोटᭅर का िशपमᱶट कायᭅᮓम पूणᭅ करने के िलए यᳰद उᲦ पेᮝोिलयम और पेᮝोिलयम उ᭜पाद िशपर ᳇ारा कायᭅᮓम के अनुसार समय पर सुपुदᭅगी नहᱭ कᳱ जाती ह,ै उᲦ िशपमᱶट को बाई पास करने िनर᭭त करने या िबलि᭥बत करने का अिधकार ᮝां᭭पोटᭅर के पास सवाᭅिधकार सुरिᭃत है। वांिछत पेᮝोिलयम और पेᮝोिलयम उ᭜पाद ᮧवेश ᭭थल पर िशपमᱶट के िलए, िनधाᭅᳯरत कायᭅᮓम से 24 घंटे पूवᭅ ᮧवेश ᭭थल पर उपल᭣ध करवाने का अिधकार ᮝां᭭पोटᭅर के पास सुरिᭃत ह;ै (डं.) िशपर के अपने टᱹकेज/भंडारण ह ᱹ केवल तभी उस मामले मᱶ यᳰद िशपर िनकासी ᭭थल पर टᱹकेज/भंडारण अपेिᭃत सुपुदᭅगी समय पर िनकासी ᭭थल पर उपल᭣ध करवाने का आ᳡ासन देता ह।ै
(2) ᮝां᭭पोटᭅर पेᮝोिलयम और पेᮝोिलयम उ᭜पादᲂ कᳱ िविश᳥ताᲐ के िलए ᳰकसी भी बैच का ᮧाि᳙ पर ᭭वीकारोिᲦ से पूवᭅ अथवा ᮧाि᳙ के दौरान नमूना और/या परीᭃण कर सकता है, तथा िशपर के गुणवᱫा ᮧमाणन और ᮝां᭭पोटᭅर के परीᭃण के बीच िवसंगित कᳱ दशा मᱶ ᮝां᭭पोटᭅर का परीᭃण मा᭠य होगा।
(3) परीᭃण के पᳯरणाम मᱶ ᳰकसी भी िववाद के मामले मᱶ, परीᭃण या ᮧमाणीकरण पर᭭पर सहमित पर एक मा᭠यता ᮧा᳙ तृतीय पᭃ ᳇ारा ᳰकया जाएगा। ¹Hkkx III µ[k.M 4º Hkkjr dk jkti=k % vlk/kj.k 5
(4) ᮝांसपोटᭅर कᳱ परीᭃण मᱶ गलती के ᳰकसी भी मामले मᱶ, होने वाले ᳞य ᮝांसपोटᭅर ᳇ारा और परीᭃण मᱶ कोई गलती नहᱭ पाए जाने पर ᳞य िशपर ᳇ारा वहन ᳰकया जाएगा।
(5) ᮝांसपोटᭅर कᳱ ᭭वीकृित और सुपुदᭅगी पेᮝोिलयम और पेᮝोिलयम उ᭜पादᲂ के िलए िशपर ᳇ारा ᮧदान कᳱ इस तरह कᳱ सुिवधा या िशपर के कᳶमयᲂ कᳱ साम᭝यᭅ इस ᮧकार कᳱ सुिवधाᲐ कᳱ पयाᭅ᳙ ता ᮝांसपोटᭅर के अनुमोदन का सा᭯य नहᱭ होगी; इस ᮧकार कᳱ सुिवधा और काᳶमयᲂ के िलए िज᭥मेदार अन᭠य ᱧप से िशपर ही होगा।
(6) ᮝां᭭पोटᭅर पेᮝोिलयम और पेᮝोिलयम उ᭜पादᲂ के पᳯरवहन हतेु िशपर के ᮧितिनिध᭜व कᳱ ᮧ᭜याशा मᱶ िनकास ᭭थल पर ᭭वीकार कर लेने पर और पर᭭पर सहमत समयाविध मᱶ यᳰद उᲦ पेᮝोिलयम और पेᮝोिलयम उ᭜पादᲂ को िनकास ᭭थल पर ᭭वीकार करने मᱶ िवफल रहने कᳱ दशा मᱶ, पᱟचं ᳞व᭭था के अनुसार पाइपलाइन िलयर करने हतेु यथोिचत उपाय, पाइपलाइन कᳱ लेवी सिहत पाइपलाइन िनि᭬ᮓय ᮧभार के िलए ᮝां᭭पोटᭅर को अिधकार होगा ᳰक वह पेᮝोिलयम और पेᮝोिलयम उ᭜पादᲂ अपवᳶतत पुन: परेषण या िनपटान कᳱ जो भी ᳞व᭭था करना चाहे कर सकता है।
(7) ᮝां᭭पोटᭅर को पᳯरवहन हतेु सᲅपा गया कोई भी पेᮝोिलयम और पेᮝोिलयम उ᭜पाद िजसमᱶ ᳰक मुकदमेबाजी िनिहत या िववाद ᮕ᭭त हो सकती ह ैअथवा ᳰकसी ᮧकार से धारणािधकार भार ᮕ᭭त हो को अ᭭वीकार करने का अिधकार होगा। पᱟचं ᳞व᭭था के अनुसार ᮝां᭭पोटᭅर िशपर के ᳰकसी भी नुकसान के िवᱧ᭟द संतोषजनक सा᭯य सᳯटक सही और भार रिहत तथा संतोषजनक बॉ᭠ड ᭃितपूᳶत के िलए पेश कर सकेगा।
7. ᮝािं᭭मस और ᮝािं᭭मस हडᱹᳲलग
(1) जहां कहᱭ भी पेᮝोिलयम और पेᮝोिलयम उ᭜पादᲂ के पᳯरवहन के दौरान ᮝांसपोटᭅर ᳇ारा इंटरफेस अवशोिषत ᳰकया जा रहा ह,ै उपयुᲦ ᮧावधान िविधवत िशपर और ᮝांसपोटᭅर के बीच पᱟचँ ᳞व᭭था मᱶ शािमल ᳰकया जाएगा।
(2) जहां कहᱭ इंटरफेस अवशोषण संभव नहᱭ है, दो पेᮝोिलयम और पेᮝोिलयम उ᭜पादᲂ के बीच ᮝांि᭭मस उ᭜प᳖ बᱟ-उ᭜पाद पाइपलाइन के मामले मᱶ ᮝां᭭पोटᭅर ᭭वािम᭜व मᱶ एक अलग टᱹक मᱶ भंडाᳯरत ᳰकया जाएगा, जहां पर ᳰक यह अ᭠य ᮝांि᭭मस के साथ िमि᮰त ᳰकया जा सकेगा।
(3) ᮧ᭜येक िशपर िजसने ᳰक पेᮝोिलयम और पेᮝोिलयम उ᭜पाद पाइपलाइन ख़᭛ड मᱶ भेज ᳰदया है, ᮝांसपोटᭅर ᮝांि᭭मस कᳱ माᮢा ᮧ᭜येक िशपर ᳇ारा पᳯरवहन ᳰकए गए पेᮝोिलयम और पेᮝोिलयम उ᭜पाद माᮢा मᱶ पाइपलाइन ख᭛ड पर आबंᳯटत करेगा।
(4) ᮝांसपोटᭅर भौितक ᱧप से िशपर को ᮝांि᭭मस िवतᳯरत करᱶगे जैसे ही आ᳡᭭त करने के िलए उपल᭣ध हो जाता है, समय के साथ- साथ ᮧ᭜येक िशपर अपनी आनुपाितक िह᭭सेदारी ᮧा᳙ करता ह।ै
(5) िशपर पार᭭पᳯरक ᱨप से सहमत समय के भीतर ᮝांि᭭मस शेयर वृि᭟द सुिनि᳟त कर िशपर को उपल᭣ध करवाएगा।
(6) आपसी सहमित के भीतर अपने आबंᳯटत ᮝांि᭭मस के ᭭वभाव के िलए िशपर का एकमाᮢ उᱫरदािय᭜व होगा। )7( िशपर को दी गई ᮝांि᭭मस कᳱ माᮢा, िशपर को सुपुदᭅ पेᮝोिलयम और पेᮝोिलयम उ᭜पाद का िहसा होगी और िनकास ᭭थल पर िशपर को उ᭜पाद कᳱ कुल सुपुदᭅगी मᱶ गणना कᳱ जाएगी। )8( पᱟचं ᳞व᭭था िव᭭तृत भाग के ᱧप मᱶ पार᭭पᳯरक सहमित का आधार उपयुᲦ तकनीकᳱ-वािणि᭔यक ᮧावधान के अनुसार ᮝां᭭पोटᭅर ᮝांि᭭मस कᳱ माᮢा वृि᭟द करने के िलए सहमत हो सकता ह।ै
8. िवलबं श᭨ुक
(1) यᳰद पेᮝोिलयम और पेᮝोिलयम उ᭜पाद ᮝां᭭पोटᭅर के ᭭वािम᭜व वाले टᱹक मᱶ सुपुदᭅगी हो रही ह ैतो, ᮝां᭭पोटᭅर को पᱟचं ᳞व᭭था के अनुᱧप पार᭭पᳯरक सहमित से समय के भीतर पेᮝोिलयम और पेᮝोिलयम उ᭜पादᲂ को टᱹक से ᳯरᲦ करने के िलए िशपर को सलाह दनेे का अिधकार होगा।
(2) ᮝांि᭭मस सिहत पेᮝोिलयम और पेᮝोिलयम उ᭜पाद को उप-िविनयम (1) मᱶ ᮧदान कᳱ गई समयाविध मᱶ नहᱭ हटाता ह ैतो दिैनक िवल᭥ब ᮧभार लगेगा जैसा ᳰक पᱟचं ᳞व᭭था मᱶ उ᭨लेख ᳰकया गया ह।ै जब तक ᳰक िशपर उ᭜पाद ᮝांि᭭मस सिहत ᮝां᭭पोटᭅर के टᱹक से नहᱭ हटाता ह ैतब तक िवलंब शु᭨क जारी रहेगा।
(3) म᭟यवतᱮ / अितᳯरᲦ भंडारण के िलए िशपर ᳇ारा यᳰद कोई, तृतीय पᭃ समझौता होता ह ᱹतो वह पᱟचं ᳞व᭭था का िह᭭सा नही होगा।
9. पाइपलाइन पᳯरवहन हािन 6 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III —SEC. 4]
(1) ᮝांसपोटᭅर सभी ᮧा᳙ पेᮝोिलयम और पेᮝोिलयम उ᭜पादᲂ के िलए ᮧ᭜यके िशपर का लेखा रखेगा। दबाव, वा᭬पीकरण, नमूने, भंडारण और माप ᮢुᳯट आᳰद के कारण घᳯटत पाइपलाइन पᳯरवहन हािन िशपर के खाते मᱶ होगी। इसकᳱ पᳯरवहन के ᮧ᭜येक बैच के िलए गणना कᳱ जाएगी और ᮧवेश ᳞व᭭था के अनुसार ᮧ᭜येक िशपर के खाते मᱶ समायोिजत या ᳞वि᭭थत ᳰकया जाएगा:
बशतᱷ ᳰक पाइपलाइन पᳯरवहन उ᭜पाद हािन का िनधाᭅरण वाᳶषक आधार पर पाइपालाइन मᱶ पᳯरवहन ᳰकए गए कᳱ सीमा कᱶ ᮤीय उ᭜पाद एवं सीमा शु᭨क बोडᭅ ᳇ारा या पेᮝोिलयम और पेᮝोिलयम उ᭜पादᲂ कᳱ कुल माᮢा का 0.015% िनधाᭅᳯरत या वा᭭तिवक तक जो भी कम हो तक सीिमत होगा।
(2) सभी अ᭠य उ᭜पाद हािनयां ᮝांसपोटᭅर कᳱ लापरवाही के पᳯरणाम ᭭वᱧप नहᱭ हᲂ तो िशपर के खात ेमᱶ जाएगी। हालांᳰक, चोरी कᳱ वजह से उ᭜प᳖ उ᭜पाद हािन का लेखांकन पᱟंच ᳞व᭭था मᱶ िविन᳸द᳥ पर᭭पर सहमित के िनयम और शतᲄ के अनुसार होगा ।
10. पᮝेोिलयम और पᮝेोिलयम उ᭜पादᲂ का मापन और लखेाकंन
(1) ᮝां᭭पोटᭅर वांिछत बुिनयाᳰद ढांचा व ᮧवेश एवं िनकासी ᭭थलᲂ पर, पेᮝोिलयम और पेᮝोिलयम उ᭜पादᲂ कᳱ माᮢा, संरचना, ᮕेड, दबाव और तापमान को मापने के िलए ᳞व᭭थाᲐ सिहत आव᭫यक उपकरण का ᮧावधान सुिनि᳟त करेगा, जैसा ᳰक पेᮝोिलयम माप मानकᲂ के िलए िविनयम 12 एवं एपीआई मैनुअल मᱶ िविन᳸द᳥ ह।ै
(2) पेᮝोिलयम उ᭜पादᲂ कᳱ संरचना को मापने कᳱ ᳞व᭭था और बुिनयाᳰद ढांचे सिहत आव᭫यक उपकरण का ᮧावधान और ᮕेड एवं बड़ी माᮢा (उदाहरणाथᭅ: एलपीजी) कᳱ पᳯररᭃा ह᭭तांतरण के मामलᲂ मᱶ अिनवायᭅ होगा।
(3) पेᮝोिलयम और पेᮝोिलयम उ᭜पादᲂ कᳱ माᮢा का मापन उप-िविनयम (1) के अनुसार या तो िशपर के उ᭜पाद मᱶ ᮧवाह को मापने के उपकरणᲂ के उपयोग ᳇ारा या ᮝां᭭पोटᭅर के टᱹकेज मᱶ ᮝां᭭पोटᭅर के पᳯरसर के अंदर पᱟचं ᳞व᭭था के अनुसार रखा गया हो तो ᮧासंिगक टᱹक कᳱ गहराई कᳱ माप का होगा। पᱟचं ᳞व᭭था के अनुसार िशपर के ᳞य पर एक तृतीय पᭃ के सवᱷᭃक कᳱ सेवाᲐ का इ᭭तेमाल ᳰकया जाएगा।
(4) पेᮝोिलयम और पेᮝोिलयम उ᭜पादᲂ पैरामीटर कᳱ माप ᮕेड उप-िविनयम (1) और उप-िविनयम (3) मᱶ िनिहत सभी िनकासी ᭭थलᲂ पर अ᭠य संिवदा᭜मक ᮧयोजनᲂ से िबᳲलग के िलए पयाᭅ᳙ होगा।
(5) कुल ᮢुᳯट सीमा, सटीकता और उपकरण मापन का दािय᭜व तकनीकᳱ िविश᳥ताᲐ के अनुसार मूल उपकरण िनमाᭅता (ओईएम) का होगा।
(6) स᭜यापन, अंशांकन या मापने के उपकरण कᳱ ᮧमािणकता ᮝांसपोटᭅर, ᮧासंिगक कोड और मानक सांिविधक आव᭫यकताᲐ के अनुसार करᱶगे।
(7) िशपर एक पूवᭅ शतᭅ के साथ चेक मीटर ᭭थािपत कर सकता ह ैताᳰक ᮝांसपोटᭅर के मापन उपकरण ᳇ारा अिभरᭃा ह᭭तांतरण ᮧयोजन के िलए अपेिᭃत ᳲबद ुपर ह᭭तᭃेप न हो।
(8) मीटᳳरग के ᳰकसी िववाद कᳱ ि᭭थित मᱶ, मीटर कᳱ शु᭟दता या ᮧमािणकरण पार᭭पᳯरक सहमित पर मा᭠यता ᮧा᳙ तृतीय पᭃ ᳇ारा ᳰकया जाएगा।
(9) ᮝांसपोटᭅर के मीटर मᱶ ᳰकसी भी दोष के मामले मᱶ, इसका ᳞य ᮝांसपोटᭅर ᳇ारा वहन ᳰकया जाएगा और मीटर मᱶ दोष नही पाया जाता ह ैतो िशपर ᳇ारा ᳞य वहन ᳰकया जाएगा।
(10) पेᮝोिलयम और पेᮝोिलयम उ᭜पादᲂ का लेखा दिैनक आधार पर या पर᭭पर सहमित िबᳲलग चᮓ भारत सरकार के के᭠ᮤीय उ᭜पाद व सीमा शु᭨क िवभाग कᳱ शतᲄ के अनुसार पेᮝोिलयम और पेᮝोिलयम उ᭜पादᲂ कᳱ िमलान,िबᳲलग और अ᭠य शतᱸ जैसा ᳰक ᮝांसपोटᭅर और िशपर के बीच िलए गए िनणᭅय और पᱟचं ᳞व᭭था के अनुसार होगी।
11. ᮧवशे ᭭थल और िनकासी ᭭थल पर बा᭟यकाᳯरताएं
(1) ᮧवेश ᭭थल पर, िशपर पेᮝोिलयम और पेᮝोिलयम उ᭜पाद पᳯरवहन हतेु पेशकश के िलए पर᭭पर सहमित पर मा᭠यता ᮧा᳙ पᭃ कᳱ ओर से ᮧमािणत ᮧयोगशाला कᳱ ᳯरपोटᭅ ᮧ᭭तुत करेगा।
(2) यᳰद िशपर ᳇ारा ᮧवेश ᭭थल पर कᳱ गई पेᮝोिलयम और पेᮝोिलयम उ᭜पाद कᳱ सुपुदᭅगी ᮕेड बᱹड और पेᮝोिलयम और पेᮝोिलयम उ᭜पाद के अ᭠य त᭜वᲂ के ᮧारंिभक ᭭तर के संबंध मᱶ िविनयम 5 के उप -िविनयम (3) और अनुसूची II मᱶ िविन᳸द᳥ अनुसार गुणवᱫा आव᭫यकताᲐ को पूरा नही करती, तो ᮝां᭭पोटᭅर- ¹Hkkx III µ[k.M 4º Hkkjr dk jkti=k % vlk/kj.k 7 (क) इसे ᭭वीकार करने से मना कर सकता ह ै और ऐसे मामलᲂ मᱶ पᱟचं ᳞व᭭था के अनुसार िशपर ᮝां᭭पोटᭅर को पᳯरसमापन हजाᭅना दनेे के िलए उᱫरदायी होगा; या (ख) ऐसे ᳰकसी भी पेᮝोिलयम और पेᮝोिलयम उ᭜पाद को ᭭वीकार कर सकता है जो ᳰक मापद᭛डᲂ के मामलᲂ मᱶ पेᮝोिलयम और पेᮝोिलयम उ᭜पाद आव᭫यकताᲐ को पूरा न करता हो-
(i) जैसा ᳰक अनुसूची II मᱶ िविन᳸द᳥ ᳰकया गया हो:
बशतᱷ ᳰक ᮝां᭭पोटᭅर पाइपलाइन को साफ करने या उसकᳱ संपूणᭅ आव᭫यᲦा के िलए और पेᮝोिलयम और पेᮝोिलयम उ᭜पाद कᳱ पाइपलाइन िविशि᳥यᲂ के अनुᱧप उ᳖त बनाने के िलए पर᭭पर सहमित के अनुसार िशपर से उिचत सेवा लागत ले सकता है;
आगे इस शतᭅ पर ᳰक उᲦ ᮕेड का पेᮝोिलयम और पेᮝोिलयम उ᭜पाद का िनकास ᭭थलᲂ पर िव᭟यमान िशपर ᳇ारा ᮧितब᭟द गुणवᱫा िविशि᳥यᲂ पर इसका कोई ᮧितकूल ᮧभाव नहᱭ पड़ेगा।
(ii) िविनयम 5 के उप-िविनयम (3) मᱶ जैसा ᳰक िन᳸द᳥ है;
बशतᱷ ᳰक ᮝां᭭पोटᭅर उᲦ पेᮝोिलयम और पेᮝोिलयम उ᭜पाद के पᳯरवहन और इस ᮧणाली मᱶ ᭃमता समायोजन के िलए िशपर से उिचत सेवा लागत चाजᭅ कर सकता है;
आगे इस शतᭅ पर ᳰक ऐसे ᮕेड के पेᮝोिलयम और पेᮝोिलयम उ᭜पादᲂ का िनकासी ᭭थलᲂ पर ᮝां᭭पोटᭅर ᳇ारा िव᭟यमान िशपर कᳱ ᮧितब᭟द गुणवᱫा िविशि᳥यᲂ पर इसका कोई ᮧितकूल ᮧभाव नहᱭ पड़ेगा।
(3) यᳰद िनकासी ᭭थल पर जब ᮝां᭭पोटᭅर ᳇ारा सुपुदᭅ पेᮝोिलयम और पेᮝोिलयम उ᭜पाद िविनयम 5 के उप-िविनयम (8) मᱶ िविन᳸द᳥ अनुसार गुणवᱫा आव᭫यकताᲐ को पूरा नहᱭ करती ह ᱹतो िशपर – (क) इसकᳱ सुपुदᭅगी ᭭वीकार करने से मना करता ह ैऔर ऐसे मामलᲂ मᱶ पᱟचं ᳞व᭭था के अनुसार िशपर ᮝां᭭पोटᭅर को पᳯरसमापन हजाᭅना दनेे के िलए उᱫरदायी होगा; या (ख) पेᮝोिलयम और पेᮝोिलयम उ᭜पाद ᭭वीकार कᳱ जाती ह ैतो ऐसी ि᭭थित मᱶ पेᮝोिलयम और पेᮝोिलयम उ᭜पाद के िलए अितᳯरᲦ सुिवधाᲐ या उ᳖यन के उपचार हतेु पार᭭पᳯरक सहमित के अनुसार िशपर ᮝां᭭पोटᭅर से सेवा कᳱ उिचत लागत चाजᭅ कर सकता ह।ै
(4) पाइपलाइन पᳯरवहन के दौरान िविभ᳖ उ᭜पादᲂ के बैचᲂ के बीच ᮝांि᭭मस उ᭜प᳖ होता ह ै और अवशोिषत होता ह ै वह िविनयम 7 के उप-िविनयम (1) से (7) मᱶ िविन᳸द᳥ के अनुसार होगा।
(5) पेᮝोिलयम और पेᮝोिलयम उ᭜पाद पाइपलाइन िबछाने िनमाᭅण, ᮧचालन या िव᭭तार करने के िलए बोडᭅ ᳇ारा ᮧािधकृत कोई भी कंपनी, पेᮝोिलयम और ᮧाकृितक गैस िनयामक बोडᭅ ( पेᮝोिलयम और पेᮝोिलयम उ᭜पाद पाइपलाइन, िबछाने, िनमाᭅण, ᮧचालन या िव᭭तार करने के िलए कंपनी को ᮧािधकृत करना ) िविनयम, 2010 के तहत या िनयत ᳰदन से पहले कᱶ ᮤ सरकार ᳇ारा ऐसा करने के िलए अिधकृत ह,ै तकनीकᳱ-आᳶथक आधार पर नए ᮧवेश और िनकास ᳲबद ुजोड़ सकते ह ᱹऔर ᳰकसी भी मौजूदा ᮧवेश और िनकास ᳲबद ुको ᭜याग सकते ह ᱹबशतᱷ ᳰक मौजूदा उपभोᲦाᲐ या िशपर, पाइपलाइन कंपनी के ᮧितकूल िनणᭅय से ᮧभािवत न हᲂ।
12. ᮧवशे ᭭थल और िनकासी ᭭थल पर सिुवधाएं
(1) िशपर ᮝां᭭पोटᭅर कᳱ पेᮝोिलयम और पेᮝोिलयम उ᭜पाद पाइपलाइन या भंडारण सुिवधाᲐ के ᮧवेश ᳲबद ुपर पᱟँच ᳞व᭭था के अनुᱧप िशपर सुपुदᭅगी ᳞व᭭था करेगा और अपेिᭃत सुिवधाएं ᮧदान करेगा, पेᮝोिलयम और पᮝेोिलयम उ᭜पादᲂ कᳱ अिभरᭃा, ह᭭तांतरण और सुपुदᭅगी हतेु जब तक ᳰक अ᭠यथा ᮝां᭭पोटᭅर व िशपर के बीच सहमित ᳞Ღ न ᱟई हो।
(2) ᮝां᭭पोटᭅर िशपर के खचᭅ पर ᮧवेश ᭭थल पर िशपर कᳱ सुिवधा उपल᭣ध कराएगा।
(3) िशपर या उसका ᮧािधकृत नािमती अपने खचᭅ और जोिखम पर ᮧवेश ᭭थलᲂ के अप᭭ᮝीम पर सुिवधाएं उपल᭣ध कराएगा, ᮧचालन और रखरखाव कᳱ अपनी ᳞व᭭था करेगा जब तक ᳰक ᮝां᭭पोटᭅर ᳇ारा सुिवधाएं एक पृथक संिवदा के अंतगᭅत उपल᭣ध न कराई जाएं।
(4) ᮝां᭭पोटᭅर िशपर को अिभरᭃा के ह᭭तांतरण और पेᮝोिलयम और पेᮝोिलयम उ᭜पादᲂ कᳱ सुपुदᭅगी के िलए ᮧवेश ᭭थल पर माप उपकरणᲂ सिहत सुिवधा उपल᭣ध कराएगा और सुिवधाᲐ का ᮧचालन करेगा। िशपर कᳱ आवशयकता पर पार᭭पᳯरक सहमत शतᲄ के आधार पर िनकास ᳲबद ुपर ᮝां᭭पोटᭅर भंडारण कᳱ सुिवधाᲐ कᳱ भी पेशकश कर सकते ह।ᱹ 8 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III —SEC. 4]
(5) ᮝां᭭पोटᭅर िशपर के खचᭅ पर िनकास ᭭थल पर िशपर कᳱ सुिवधा के साथ ᮝां᭭पोटᭅर कᳱ सुिवधा मᱶ सामंज᭭य ᭭थािपत करेगा।
(6) िशपर ᭭थल उपल᭣ध कराएगा और ᳰकसी िविश᳥ िनकासी ᭭थल सुिवधाᲐ कᳱ ᭭थापना, ᮧचालन, रखरखाव और सुधार करने मᱶ ᮝां᭭पोटᭅर के साथ सहयोग करेगा जब िशपर के पᳯरसर मᱶ ऐसी िनकासी सुिवधाएं उपल᭣ध कराई जाएंगी।
(7) िशपर पेᮝोिलयम और पेᮝोिलयम उ᭜पाद पाइपलाइनᲂ मᱶ सुपुदᭅगी ᭭थल पर िव᭟यमान मानक और िविशि᳥यᲂ के अनुᱧप जांच मीटर उपल᭣ध कराएगा:
बशतᱷ ᳰक ᮝां᭭पोटᭅर और िशपर के मीटर मᱶ ᳯरᳲडग मᱶ कोई अंतर पाए जाने कᳱ ि᭭थित मᱶ ᮝां᭭पोटᭅर के मीटर कᳱ ᳯरᳲडग को अंितम माना जाएगा।
(8) मीटर कᳱ ᳯरᳲडग मᱶ कोई िववाद होने पर मीटर कᳱ जांच और ᮧमाणन बोडᭅ ᳇ारा अनुमोᳰदत अनुसार ᳰकसी ᮧािधकृत तृतीय पᭃ ᳇ारा पार᭭पᳯरक सहमित पर कᳱ जाएगी।
(9) ᮝां᭭पोटᭅर के मीटर मᱶ कोई खराबी पाए जाने पर, उसके खचᭅ को ᮝां᭭पोटᭅर ᳇ारा वहन ᳰकया जाएगा और यᳰद मीटर मᱶ कोई खराबी नहᱭ पाई जाती ह,ै तो खचᭅ िशपर ᳇ारा वहन ᳰकया जाएगा।
13. पाइपलाइन ᭃमता बु᳴ कग.
(1) एक से अिधक िशपर ᮧवेश या िनकासी ᭭थल पर ᭃमता बनाए रख सकते ह।ᱹ
(2) बुक कᳱ गई ᭃमता एमडीयू के ᱧप मᱶ पᱟचं ᳞व᭭था के अंतगᭅत िशपर और ᮝां᭭पोटᭅर के बीच एक िनिवदा के मा᭟यम स े िनधाᭅᳯरत होगी।
(3) जब एक ᮝां᭭पोटᭅर िशपर से पᱟचं ᮧाि᳙ हतेु अनुरोध ᮧा᳙ करता ह ैतो िशपर से अनुरोध ᮧा᳙ होने के तारीख से 10 ᳰदनᲂ के अंदर उᱫर दगेा- (क) पुि᳥ करनी चािहए ᳰक अितᳯरᲦ ᭃमता, अनुरोध को पूरा करने के िलए पयाᭅ᳙ ह ैऔर वह उन ᮧभारᲂ एवं िनबंधन तथा शतᲄ का उ᭨लेख करेगा िजन पर ᳰक वह इ᭠हᱶ उपल᭣ध होगा; या (ख) यह सलाह दगेा ᳰक अनुरोध को पूरा करने के िलए अितᳯरᲦ ᭃमता नहᱭ है; या (ग) यह सलाह दगेा ᳰक िशपर ᳇ारा उपल᭣ध कराए गए आंकड़ᲂ के तकनीकᳱ अ᭟ययन कᳱ आव᭫यकता ह ै ताᳰक उनके अनुरोध को पूरा ᳰकया जा सके और ऐसा अ᭟ययन सात ᳰदनᲂ के अंदर पूरा ᳰकया जाएगा; अथवा (घ) यह सलाह दगेा ᳰक पᱟचं उपल᭣ध कराना तकनीकᳱ या ᮧचालन कᳱ दिृ᳥ से ᳞ावहाᳯरक नहᱭ है।
(4) ᮝां᭭पोटᭅर को सूिचत करते ᱟए िशपर बुक कᳱ गई ᭃमता के अनुसार अ᭠य िशपर के पᭃ मᱶ ᭃमता बुड सीमा तक ᳯरलीज कर सकता ह।ै
(5) पᳯरवहन के िलए पेᮝोिलयम और पेᮝोिलयम उ᭜पादᲂ के नामांकन मᱶ िशपर और ᮝां᭭पोटᭅर के बीच अनसुूची पर ᱟई सहमित के अनुसार दिैनक-नामाᳰंकत माᮢाᲐ के आधार पर एक ᳰदन या अिधक ᳰदनᲂ का ᭣यौरा शािमल होगा।
14. सामा᭠य वाहक और सिंवदा वाहक के बीच इंटर कनेशन तथा पᮝेोिलयम और पᮝेोिलयम उ᭜पाद पाइपलाइनᱶ
(1) दो सामा᭠य वाहकᲂ के बीच पर᭭पर संबंध या संिवदा वाहक पाइपलाइन ᮧणािलयᲂ कᳱ या तो ᮝां᭭ पोटᭅर या िशपर को आव᭫यकता होगी तथा ऐसे इंटर कनेशन कᳱ तब ही अनुमित दी जाएगी बशतᱷ ᳰक सामा᭠य ᮧाि᳙ वाहक पाइपलाइन मᱶ ᭃमता उपल᭣ध हो और जब यह ᮧचालन तथा तकनीकᳱ दिृ᳥ से ᳞वहायᭅ हो।
(2) पाइपलाइनᲂ को पर᭭पर जोड़ने पर पेᮝोिलयम और पेᮝोिलयम उ᭜पादᲂ कᳱ िविशि᳥यां िविनयम 5 के संगत अनुसार होनी चािहए।
(3) बुिनयाᳰद ढांचे सिहत पᱟचं कᳱ सुिवधाथᭅ इस तरह के इंटर कनेशन कᳱ लागत उस कंपनी ᳇ारा वहन कᳱ जाएगी िजसने ᳰक उᲦ इंटर कनेशन कᳱ आव᭫यकता शुᱧ कᳱ थी बशतᱷ ᳰक इसे ᮝां᭭पोटᭅर ᳇ारा स᭥पाᳰदत ᳰकया गया हो।
(4) इंटर कनेशन सुिवधाएं भी उस िशपर ᳇ारा ᭭थािपत करवाई जाएंगी और ऐसे इंटर कनेशन के िलए ᮝां᭭पोटᭅर सुिवधा द े सकता ह।ै
(5) इंटर कनेशन ᭭थल पर ᮝां᭭पोटᭅर और िशपर के बीच पर᭭पर सहमित बनाई जाएगी। ¹Hkkx III µ[k.M 4º Hkkjr dk jkti=k % vlk/kj.k 9
(6) पाइपलाइन नेटवकᭅ का इंटर कनेशन मौजुदा पाइपलाइन मᱶ िनकास ᭭थल को जोड़ने जैसा है और ऐसे इंटर कनेशन के िलए ऐसे सभी ᮧावधान लागू हᲂगे।
(7) जो कंपनी इंटर कनेशन का अनुरोध अ᭭वीकार करती ह ैतो एक स᳙ाह के अंदर बोडᭅ को सूिचत करेगी।
15. पᱟंच उपल᭣ध करान ेकᳱ प᭟दित
(1) िशपर और ᮝां᭭पोटᭅर के बीच अनुबंिधत ᭃमता पेᮝोिलयम और ᮧाकृितक गैस िविनयामक बोडᭅ (पेᮝोिलयम और पेᮝोिलयम उ᭜पाद पाइपलाइन को िबछाने, िनमाᭅण,ᮧचालन या िव᭭तार करने के िलए कंपिनयᲂ को ᮧािधकृत करना) िविनयम, 2010, के उप-िविनयम 5(6)(i) तथा पेᮝोिलयम और ᮧाकृितक गैस िविनयामक बोडᭅ ( सामा᭠य वाहक या संिवदा वाहक के ᱨप मᱶ पेᮝोिलयम और पेᮝोिलयम उ᭜पाद पाइपलाइनᲂ कᳱ घोषणा या ᮧािधकृत करने के िलए मागᭅदशᭅक िस᭟दांत ) िविनयम, 2012, के िविनयम 6 के ᮧावधानᲂ के अनुसार होगी।
(2) ᳰकसी भी तृतीय पᭃ ᳇ारा खुली पᱟचं भेद-भाव रिहत आधार पर सामा᭠य वाहक के ᱧप मᱶ उपयोगाथᭅ अितᳯरᲦ ᭃमता का आबंटन पहले आओ पहले पाओ के आधार पर ᳰकया जाएगा।
16. िनयोिजत रखरखाव
(1) ᮝां᭭पोटᭅर को समय रहते एक िनि᳟त समयाविध के िलए रखरखाव योजना तैयार और ᮧकािशत करनी होगी िजसमᱶ उन ᮧवेश और िनकासी ᭭थलᲂ का उ᭨लेख ᳰकया जाएगा जहां पेᮝोिलयम और पेᮝोिलयम उ᭜पादᲂ का ᮧवाह रखरखाव कायᭅ, ᮧितबंध कᳱ सीमा और समय कᳱ बार᭥बारता सीिमत होगी ताᳰक ᮧभािवत पा᳷टयᲂ को मुि᭫कल कम से कम हो तथा ऐसी रखरखाव अनुसूची हतेु ᮝां᭭पोटᭅर को सहायता दनेे के िलए ᮧवेश और िनकासी ᭭थलᲂ पर उनके अिसत᭜व के ᮧवाह पर िशपर से सूचना का अनुरोध ᮧा᳙ ᳰकया जा सकेगा।
(2) अनुसूिचत रखरखाव कᳱ तारीखᲂ को अिᮕम ᱧप मᱶ सूिचत ᳰकया जाना चािहए िजसे ᳰक ᮧभािवत िशपर को उसकᳱ ओर से तीस ᳰदनᲂ के अिᮕम नोᳯटस पर समायोिजत ᳰकया जा सकता ह।ै
(3) िनयोिजत रखरखाव कᳱ अविध एक वषᭅ मᱶ दस ᳰदनᲂ से अिधक नही होगी परंतु ᳰकसी भी एक मामले मᱶ िनरंतर पांच ᳰदन ᮧित घटना से अिधक नही होगी।
(4) ᮝांसपोटᭅर और िशपर आगे पर᭭पर बनाई गई समय और अनुसूिचत योजना रख-रखाव कᳱ समय सीमा पर सहमत हो सकते ह ᱹ बशतᱷ ᳰक िशपर कᳱ सुिवधाथᭅ उप-िविनयम (3) मᱶ ᮝां᭭पोटᭅर को रखरखाव योजना के िलए ᮧदत समय सीमा ᮧभािवत नहᱭ करती है।
17. अिनवायᭅ बा᭟यता के बारे मᱶ सचूना-
(1) ᮧभािवत पाटᱮ पर कोई अिनवायᭅ बा᭟यता होने पर - (क) ᮧ᭜येक दसूरी पाटᱮ को अिनवायᭅ बा᭟यता के घᳯटत होने और उसकᳱ ᮧकृित के बारे मᱶ यथाशीᮖ सूिचत करेगी तथा उसके संभािवत अविध तक बने रहने तथा उससे ᮧभािवत होने वाली पाटᱮ के कायᭅ-िन᭬पादन कᳱ बा᭟यताᲐ का उिचत ᱧप से आकलन ᳰकया जा सकता है; और (ख) इसके बाद समय-समय पर ᮧ᭜येक पाटᱮ को िन᳜िलिखत का उिचत ᭣यौरा उपल᭣ध कराएगी, अथाᭅᱫ:
(i) ख᭛ड (क) के अंतगᭅत अिधसूिचत मामलᲂ मᱶ ᱟई ᮧगित;
(ii) अिनवायᭅ बा᭟यता से िनपटने या इसके ᮧभाव और इसकᳱ संगत बा᭟यताᲐ के कायᭅ-िन᭬पादन को पुन:शुᱧ करने के िलए ᮧभािवत पᭃ ᳇ारा उठाए गए कदम।
(2) दयेता होने पर कंपिनयᲂ को भुगतान कᳱ बा᭟यता को छोड़कर अिनवायᭅ बा᭟यता कᳱ ि᭭थित मᱶ उनकᳱ संबंिधत बा᭟यताᲐ से छूट दी जाएगी।
18. ᮧचालना᭜मक योजना
(1) िशपर ᮝां᭭पोटᭅर को ऐसी माᮢाᲐ, िज᭠हᱶ वह िविनयमᲂ के अंतगᭅत ᮧावधानᲂ के अनुसार दिैनक आधार पर पाइपलाइन ᮧणाली से ᳰकसी िविश᳥ ᮧवेश ᭭थल तथा िविश᳥ िनकासी ᭭थल पर सुपुदᭅगी करना चाहता ह,ै का दिैनक, सा᳙ािहक या मािसक नामांकन करेगा।
(2) (क) ᮝां᭭पोटᭅर पाइपलाइन ᮧणाली मᱶ ᮧा᳙ नामांकन और उपल᭣ध ᭃमता के आधार पर पेᮝोिलयम और पेᮝोिलयम उ᭜पादᲂ कᳱ माᮢाᲐ कᳱ सूची बनाएगा। 10 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III —SEC. 4] (ख) ᮝांसपोटᭅर पेᮝोिलयम कᳱ माᮢा के िलए नामांकन सचूीब कर सकता है, पेᮝोिलयम उ᭜पादᲂ कᳱ अिधकतम बुड ᭃमता घोिषत पाइपलाइन ᭃमता से अिधकतम 10 ᮧितशत हो सकती है।
(3) (क) ᮝां᭭पोटᭅर उप-िविनयम (2) के ख᭛ड (ख) के अंतगᭅत िनधाᭅᳯरत और अनुसूची ᮧᳰᮓया के अनुसार िविभ᳖ िशपसᭅ को पेᮝोिलयम उ᭜पादᲂ कᳱ माᮢा आबंᳯटत करेगा। (ख) िशपर को गंत᳞ ᭭थल-वार (िनकासी ᭭थल-वार) तैयार कᳱ गई अनुसूची के अनुसार आबंटन कᳱ सुपुदᭅगी कᳱ जाएगी।
19. आपातकाल आपातकाल कᳱ ि᭭थित मᱶ िशपर और ᮝां᭭पोटᭅर ᳇ारा अपनाई जान ेवाली ᮧᳰᮓया को िशपर और ᮝां᭭पोटᭅर ᳇ारा पर᭭पर सहमत शतᲄ पर पᱟचं ᳞व᭭था मᱶ शािमल ᳰकया जाएगा।
20. सचूना कᳱ गोपनीयता ᳰकसी कंपनी ᳇ारा इन िविनयमᲂ कᳱ आव᭫यकता के संबंध मᱶ या इनके पᳯरणाम᭭वᱧप ᮝां᭭पोटᭅर, िशपर या अ᭠य ᳰकसी पाटᱮ को िलिखत मᱶ या अ᭠यथा ᮧ᭭तुत या सपुुदᭅ ᳰकए गए सभी द᭭तावेज, सूचना, आंकड़े, ᮧ᭭तुितयां और ᳯट᭡पिणयᲂ को गोपनीय माना और समझा जाएगा तथा द᭭तावेजᲂ सूचना, आंकड़ᲂ, ᮧ᭭तुितयᲂ और ᳯट᭡पिणयᲂ को पूणᭅत: या उसका कोई भाग या सभी का खुलासा नहᱭ ᳰकया जाएगा, िजसमᱶ ᳰकसी ᭠यायालय मᱶ कायᭅवािहयᲂ को छोड़कर उसके घटकᲂ और ᮧितयᲂ के सभी ᭭वᱧप शािमल हᲂगᱶ।
21. िविवध
(1) सामा᭠य वाहक या अनुबंध वाहक पेᮝोिलयम और पेᮝोिलयम उ᭜पाद पाइपलाइन के िलए पᱟचं कोड के संबंध मᱶ समय-समय पर बोडᭅ ᳰदशा िनदᱷश जारी कर सकता ह।ै
(2) इन िविनयमᲂ कᳱ ᳞ाया पर यᳰद कोई ᮧ᳤ उ᭜प᳖ होता ह,ै तो उसका िनणᭅय बोडᭅ ᳇ारा तय जाएगा। अनसुचूी- I पाइपलाइन कᳱ ᭃमता घोिषत करन ेका ᮧपᮢ (दखेᱶ िविनयम 4(2))
1. कंपनी का नाम :
2. पाइप लाइन का नाम:
3. पाइपलाइन कᳱ ᭃमता का िववरण (नीचे उ᭟दᳯरत सारणी के अनुसार):
ख᭛ड का नाम पीएनजीआरबी ᳇ारा अनुमोᳰदत ᭃमता अविध के िलए ᭃमता का ᮩेक-अप (एमएमटी) कुल सामा᭠य बाहक सिहत (एमएमटी) सामा᭠य बाहक (एमएमटी) खुद कᳱ आव᭫यकता पुि᳥ कᳱ गई कम से कम एक वषᭅ कᳱ अविध के िलए अ᭠य कंपिनयᲂ के साथ अनुबंिधत ᭃमता सामा᭠य वाहक एक वषᭅ से कम कᳱ अविध िलए अ᭠य कंपिनयᲂ के साथ अनुबंिधत ᭃमता अनबुिंधत उपल᭣ध अनबुिंधत उपल᭣ध
4. पाइपलाइन मागᭅ पर ᮧवेश ᭭थलᲂ कᳱ संया:
5. ᮧवेश ᭭थलᲂ का ᭭थान:
6. िनकासी ᭭थलᲂ कᳱ संया:
7. िनकासी ᭭थलᲂ का ᭭थान:
8. तकनीकᳱ मानद᭛ड:
(क) ᮧवेश ᭭थल पर ᮧवेिशका दबाव:
(ख) ᮧवेश ᭭थल पर ᮕेड बᱹड:
¹Hkkx III µ[k.M 4º Hkkjr dk jkti=k % vlk/kj.k 11 (ग) तापमान:
(घ) अनुसूची-II के अनुसार अ᭠य त᭜व:
9. ऐसी लि᭥बत अविध के साथ-साथ सामा᭠य वाहक ᮧयोगाथᭅ पाइपलाइन के िलए ᮝां᭭पोटᭅर के पास लंिबत कोई मांग:
10. ᮧवेश और िनकासी ᭭थलᲂ पर ᮧाथिमकता:
अनसुचूी- II (दखेᱶ िविनयम 5(6),5(8)11(2)(ख)( i)) पᮝेोिलयम उ᭜पाद कᳱ भौितक िवशषेताएं िविशि᳥या ं (क) मोटर ि᭭पᳯरट के िलए (यरूो-IV) (ख) हाई ᭭पीड िडजल के िलए(यरूो-IV) मापद᭛ड सीमा मापद᭛ड सीमा सलफर (अिधकतम पीपीएमड᭣᭨यू) नवीनतम आईएस: 2796 के अनुसार घन᭜व @ 150से, ᳰकलोᮕा./एम3 नवीनतम आईएस:
1460 के अनुसार अनुसंधान ऑटेन संया (रोन) (᭠यूनतम) स᭨फर, पीपीएम (अिधकतम) बᱶजᱭन वॉ᭨यूम % (अिधकतम) आसवन 95% ᳯरकवरी oसे.
(अिधकतम) एरोमेᳯटस वॉ᭨यूम % (अिधकतम) िसटेन संया (᭠यूनतम) ऑले᳴फस वॉ᭨यूम % (अिधकतम) पानी कᳱ माᮢा (% वा᭨यूम ᳇ारा) (अिधकतम) मोटर ऑटेन संया (मॉन) (᭠यूनतम) पॉिलसाइिलक एरोमेᳯटक हाईᮟोकाबᭅन (पीएएच) ड᭣᭨युटी (%) रीड वा᭬प दबाव (आरवीपी) (केपीए) (अिधकतम) अ᭠य कोई मापद᭛ड (सीमाएं आई एस मानक के अनुसार) अ᭠य मापद᭛ड (सीमाएं आईएस मानकᲂ के अनुसार) के. राजे᭫ वर राव, िवशेष कायाᭅिधकारी (आर) [िव᭄ापन-III /4/असा./188(166)] PETROLEUM AND NATURAL GAS REGULATORY BOARD NOTIFICATION New Delhi, the 22nd July, 2016 F. No. Infra/AC/PPPL/1/13.—In exercise of the powers conferred by section 61 of the Petroleum and Natural (ग) पᮝेोिलयम उ᭜पादᲂ के िलए उ᭜पाद िविश᳥ गᱧु᭜व (15°स.े पर) िचपिचपाहट (सीएसटी) वा᭬प दाबाव (ᳰकलोᮕा./वगᭅ सिेम) तरलीकृत पᮝेोिलयम गसै (एलपीजी) नवीनतम आईएस:4576 के अनुसार सपुीᳯरयर केरोसीन तले (एसकेओ) नवीनतम आईएस:1459 के अनुसार एिवएशन टबाᭅईन ᭢यूल (एटीएफ) नवीनतम आईएस:1571 के अनुसार न᭢ैथा नवीनतम उ᳒ोग गुणवता िनयंᮢण मैनुअल के अनुसार (आईयूसीएम) 12 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III —SEC. 4] Gas Regulatory Board Act, 2006 (19 of 2006), the Petroleum and Natural Gas Regulatory Board hereby makes the following regulations, namely:-
1. Short title and commencement.
(1) These regulations may be called the Petroleum and Natural Gas Regulatory Board (Access Code for Common Carrier or Contract Carrier Petroleum and Petroleum Products Pipelines) Regulations, 2016.
(2) They shall come into force on the date of their publication in the Official Gazette.
2. Definitions.
(1) In these regulations, unless the context otherwise requires, -
(a) “access arrangement” means a contract document between the authorized entity and the shipper specifically defining terms and conditions for the access to the petroleum and petroleum products pipeline and placed on the web site of the authorized entity;
(b) “Act” means the Petroleum and Natural Gas Regulatory Board Act, 2006”;
(c) “appointed day” means the date of October 1, 2007 when the Central Government notified the establishment of the Petroleum and Natural Gas Regulatory Board;
(d) “batch” means a quantity of petroleum product of like specifications moved through the pipeline as an identifiable unit;
(e) “Board” means the Petroleum and Natural Gas Regulatory Board established under the Petroleum and Natural Gas Regulatory Board Act, 2006;
(f) ”capacity”:
i. “booked capacity” means maximum daily quantity (MDQ) of petroleum and petroleum products on any day to be delivered at an entry point or off taken at an exit point as per the access arrangement between the shipper and the transporter;
ii. “contracted capacity” means the petroleum and petroleum products quantity contracted for transportation through a pipeline system on daily, monthly or yearly basis;
(g) “custody transfer meter” means a device or a set of devices which measures the quantity of petroleum and petroleum products for transfer of custody from one entity to another;
(h) “dispute” means any conflict or difference arising between the entities under or in connection with these regulations or the access arrangement or with regard to specifications of the products;
(i) “entry point” means the point at which the petroleum and petroleum product delivered by shipper is injected into the petroleum and petroleum products pipeline;
(j) “exit point” means the point at which the petroleum and petroleum product is withdrawn from the petroleum products pipeline for delivery to the shipper as per the access arrangement;
(k) “grade” means the classification of petroleum and petroleum product according to its chemical composition and characteristics such as its Research Octane Number (RON), sulphur content, additive content, freezing point and the quantity or proportion thereof;
(l) “grade band” means the range of minimum and maximum acceptable composition, characteristics, quantity or proportion thereof for petroleum and petroleum product;
(m) “interface" means the mixture which occurs in normal pipeline operations between batches of petroleum products having different specifications;
(n) “transmix” means the product removed from the pipeline system between two separate product batches that cannot be blended with the first or second product;
(o) “maximum daily quantity” means the maximum volume of petroleum and petroleum products contracted, booked or scheduled for delivery in a particular day within twenty four hours of the day;
(p) "petroleum and petroleum products pipeline" means any pipeline including a branch or spur lines for transport of petroleum and petroleum products and includes all connected infrastructure such as pumps, metering units, storage facilities at originating, delivery, tap off points or terminal stations and the like connected to the common carriers or contract carriers including line balancing tanks and tankage required for unabsorbed interface, essential for operating a pipeline system but excluding pipelines, which are dedicated for supply of petroleum products to a specific consumer which are not for resale :
¹Hkkx III µ[k.M 4º Hkkjr dk jkti=k % vlk/kj.k 13
Provided that the transporter may own, hire, outsource or use on hospitability basis such connected facilities on non discriminatory basis.
Note: For the purpose of access, the facilities declared by the authorized entity for operating a petroleum and petroleum project pipeline system shall be considered as common carrier or contract carrier;
(q) “petroleum and petroleum products pipeline section” means a part of petroleum and petroleum products pipeline between an entry point and an exit point or between two exit points or between two entry points;
(r) “shipper” means an entity and also includes a consumer who intends to utilize the capacity in the pipeline for transmission of petroleum and petroleum products;
(s) “transportation loss” (TL) means the unaccounted quantity of petroleum and petroleum products resulting due to inaccuracy of custody meter, leakages or releases during regular operation and maintenance of the pipeline system but not occurring due to any third party damage;
(t) “transporter” means an entity authorized by the Board or authorized by the Central Government prior to the appointed date for laying, building, operating or expanding petroleum and petroleum products pipeline;
(u) “unit of measurement” means unit for measurement of quantity of petroleum and petroleum products excluding LPG and shall be in kilo liter corrected as per American Society for Testing and Materials (ASTM) table 53B for density of the product at 15 degree Celsius and table 54B for volume to 15 degree Celsius or shall be Metric Tonne as the case may be. For LPG the “unit of measurement” shall be Metric Ton:
Provided that this measurement should be corrected by density over 24 hours to get the mass of petroleum product for the purpose of accounting.
(2) Words and expressions used in these regulations, but defined in the Act or in the rules or regulations made there under, shall have the meanings respectively assigned to them in the Act or in the rules or regulations, as the case may be.
3. Application.
These regulations shall apply to all entities operating or proposing to operate petroleum and petroleum products pipeline and shipper who engage or intend to engage in transportation service for petroleum and petroleum products pipeline.
4. Declaration of capacity.
(1) The capacity of a petroleum and petroleum products pipeline shall be as determined by the Board as specified in the Petroleum and Natural Gas Regulatory Board (Determining Capacity of Petroleum, Petroleum Products and Natural Gas Pipeline) Regulations, 2010.
(2) The transporter shall declare capacity for petroleum and petroleum products pipeline system including entry and exit point-wise section capacity, and available capacity and host the same on its web site on the 1st of every month in the prescribed manner as per format specified at Schedule-I and shall send the information to the Board and the same shall also be hosted by the Board on its website.
(3) The available capacity declared by the transporter under sub-regulation (2) shall be available for use on common carrier or contract carrier basis or both and shall be allocated in line with the provisions under regulation 13.
5. Petroleum and Petroleum Products parameters.
(1) The petroleum and petroleum products to be transported shall be in accordance with the following products specification:
(a) Motor Spirit (MS) - As per the latest version of Bureau of Indian Standards (BIS)- IS2796;
(b) High Speed Diesel (HSD) - As per the latest version of Bureau of Indian Standards (BIS)- IS1460;
(c) Superior Kerosene Oil (SKO) - As per the latest version of Bureau of Indian Standards (BIS)- IS1459;
(d) Naptha: As per the latest version of Industry Quality Control Manual (IQCM);
(e) Liquefied Petroleum Gas (LPG): As per the latest version of Bureau of Indian Standards (BIS)- IS4576; and
(f) Aviation Turbine Fuel (ATF): As per the latest version of Bureau of Indian Standards (BIS)- 14 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III —SEC. 4] IS1571.
Note: Petroleum and Petroleum Products specifications as above shall be applicable at exit points of petroleum and petroleum products pipeline. Entry point specifications shall compensate for deterioration during storage or transit.
(2) The authorized entity shall formulate the grade band for the petroleum and petroleum products to be transported through petroleum and petroleum products pipeline keeping in view the following parameters, namely:-
(a) grade of its own petroleum and petroleum products proposed to be transported;
(b) grade of firmed up contracted capacity of petroleum and petroleum products;
(c) requirements of downstream consumers of petroleum and petroleum products on the pipeline;
(d) technical requirement of the pipe line system; and
(e) grade of the inter-state pipelines either supplying petroleum and petroleum products into the pipeline system or receiving petroleum and petroleum products from this pipeline system.
(3) The transporter shall publish grade band referred to in sub-regulation (2) on its website within a period of one month of authorization by the Board, as referred to in sub-regulation (2) of regulation 4, under intimation to the Board in the format as provided in Schedule-II:
Provided that the entities authorized before the publication of these regulations shall publish the grade band within a period of one month of the date of publication of these regulations.
(4) Grade band referred to in sub-regulation (2) shall be applicable to all shippers on non-discriminatory basis.
(5) The transporter may review the Grade band for petroleum and petroleum products from time to time taking into account changes, if any, in the Industry Quality Control Manual (IQCM) / Bureau of Indian Standards (BIS) and accordingly would update the grade band details on its web site:
Provided that transporter shall immediately inform the Board as and when such updation is carried out by the transporter besides putting the same on its web site.
(6) The threshold limits for elements in petroleum and petroleum products viz. specific gravity, viscosity, vapour pressure, permissible contamination level shall be as given in Schedule II.
(7) The transporter shall define the petroleum and petroleum products parameters at entry points in terms of petroleum and petroleum products hydraulics specifying the acceptable range of pressure and temperature and the same shall be hosted on the website of the transporter. In addition, minimum required batch size for different products, estimated transmix generation and pipeline loss allowance etc. shall also be hosted on the website of transporter as well as it will become part of “Access Arrangement”.
(8) Shipper shall supply petroleum and petroleum products conforming to product specifications as published by the transporter under sub-regulation (3) and given in Schedule II and the transporter shall deliver petroleum and petroleum product at exit point conforming to product specifications as per sub-regulation
(3).
6. Acceptance of Petroleum and Petroleum products.
(1) Petroleum and petroleum product shall be accepted by the transporter for transportation -
(a) only if it meets required quality and specifications as published by the transporter under subregulation (3) of regulation 5 and in Schedule II;
(b) only when product is free from any water, non-hydrocarbon blending elements and other impurities;
(c) only if any additives and inhibitors, including Drag Reducing Agent (“DRA”) and corrosion inhibitor compound, to be included in shipper’s petroleum products have been accepted by the shipper. Shippers will be given 30 days notice stating any changes in additive or inhibitor to be injected (generic and trade name), the maximum quantity, the petroleum and petroleum products into which it will be injected, and the date, the injection shall begin;
(d) only when petroleum and petroleum product are delivered by shipper or made available to the transporter at the time mutually agreed by shipper and transporter to meet transporter’s shipment schedule. If such petroleum and petroleum products are not delivered by shipper in time to meet said schedule, transporter reserves the right to cancel, bypass or delay said shipment. Transporter reserves the right to require petroleum and petroleum product to be available for shipment at entry ¹Hkkx III µ[k.M 4º Hkkjr dk jkti=k % vlk/kj.k 15 point 24 hours prior to the time scheduled for shipment from entry point;
(e) only if the shipper assures the availability of tankage or storage at the exit point at expected delivery time in case the tankage or storage is owned by the shipper.
(2) Transporter may sample and test any batch for the specifications of petroleum and petroleum products received prior to acceptance or during receipt of batch, and, in the event of variance between shipper’s Quality Certification and transporter’s test, transporter’s test shall prevail.
(3) In case of any dispute in test results, the testing or certification shall be carried out by an accredited third party as mutually agreed.
(4) In case of any fault in the test of transporter, the expenses on this account shall be borne by the transporter and in case no fault is found in the test, the expenses shall be borne by the shipper.
(5) Transporter’s acceptance and delivery of petroleum and petroleum products to any facility provided by shipper shall not evidence transporter’s approval of the adequacy of such facilities or the competency of shipper’s personnel responsibility for such facilities and personnel shall be exclusively that of the shipper.
(6) In the event the transporter has accepted petroleum and petroleum products for transportation in reliance upon shipper’s representations as to acceptance at exit points, and there is failure to accept such petroleum and petroleum products at exit points within mutually agreed time frame, transporter shall have the right to divert, re-consign or make whatever arrangements for disposal of the petroleum and petroleum products as it deems appropriate to clear the pipeline facilities including levy of pipeline idling charges as per the access arrangement.
(7) Transporter shall have the right to reject any petroleum and petroleum products offered for transportation which may be involved in litigation or the title of which may be in dispute, or which may be encumbered by a lien or charge of any kind. Transporter may seek the satisfactory evidence of shipper’s perfect and unencumbered title and satisfactory bond indemnifying transporter against any losses as per the access arrangement.
7. Transmix and Transmix handling.
(1) Wherever interface is being absorbed by the transporter during the transportation of the petroleum and petroleum products, suitable provision shall be duly incorporated in the access arrangement between shipper and transporter.
(2) Wherever interface absorption is not feasible, transmix generated between two petroleum and petroleum products in case of multi-product pipeline will be stored in a separate tank owned by transporter, where it may mix with other transmix.
(3) Transporter shall allocate transmix to shippers that have shipped the petroleum and petroleum products on the pipeline section in proportion to each shipper’s volume of petroleum and petroleum products transported in that pipeline section.
(4) Transporter will physically distribute transmix to the shippers as it becomes available to assure that over time each shipper receives its proportionate share.
(5) Shipper shall ensure to lift transmix share within mutually agreed time it is made available to shipper.
(6) Shipper will have sole responsibility for the disposition of its allocated transmix within mutually agreed period
(7) The quantity of transmix given to shipper will be part of the petroleum and petroleum products delivered to shipper and shall be accounted in total products delivered to shipper at exit points.
(8) Transporter may agree to lift transmix with suitable techno-commercial provisions mutually agreed and detailed as part of access arrangement.
8. Demurrage.
(1) If petroleum and petroleum products are delivered in transporter owned tank, then, transporter shall have the right to clear tankage for incoming deliveries by advising shipper to withdraw the petroleum and petroleum products within mutually agreed time as per the access arrangement.
(2) Petroleum and petroleum products including transmix, not removed at the time period provided in subregulation (1) is subject to a daily demurrage charge as mentioned in the access arrangement. Demurrage charge shall continue until the shipper’s product including transmix has been removed from transporter’s tank.
(3) Third party agreements, if any, by shipper for intermediate or additional storage shall not form part of 16 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III —SEC. 4] access arrangement.
9. Pipeline transportation loss.
(1) Transporter shall account to each shipper for all petroleum and petroleum products received. The pipeline transportation loss resulting from shrinkage, evaporation, sampling, dormant during storage and measurement error etc., which will be on shipper’s account. This will be calculated for each batch of transportation and will be adjusted or settled to each shipper’s account in accordance with access arrangement:
Provided that the pipeline transportation loss shall be limited to 0.015% of the total volume of the petroleum and petroleum products transported in the pipeline on annual basis or limit prescribed by Central Board of Excise and Customs, or the actual whichever be the lowest.
(2) All other product losses not resulting from the transporter's negligence will be on the account of the concerned shipper. However, accounting of product loss due to pilferage shall be as per mutually agreed terms and conditions specified in access arrangement.
10. Measurement and Accounting of petroleum and petroleum products.
(1) The transporter shall ensure provision of necessary equipment including requisite infrastructure and arrangements at both the entry and exit points to measure petroleum and petroleum products quantity, composition, grade, pressure and temperature as specified in regulation 12 and API Manual for Petroleum Measurement Standards.
(2) Provision of necessary equipment including infrastructure and arrangements to measure petroleum and petroleum products composition and grade shall be mandatory for cases of custody transfer in terms of mass(e.g. LPG).
(3) Measurement of petroleum and petroleum products quantity shall be as per sub-regulation (1) either by usage of flow measuring equipment or, in case shipper’s product is placed in transporter’s tankages inside the transporter's premises as per Access Arrangement, then, by measurement of relevant tank dips.
Services of a third party surveyor shall be used at the cost of the shipper as per the Access Arrangement.
(4) Measurement of grade and petroleum and petroleum products parameter as provided in sub-regulations
(1) and sub-regulation (3) shall be sufficient for billing and other contractual purposes for all exit points.
(5) Total error limit, accuracy and repeatability of the measuring equipment shall be as per the technical specifications of the Original Equipment Manufacturers (OEMs).
(6) The transporter shall carry out verification, calibration or proving of measuring equipment as per the relevant codes, standards and statutory requirements.
(7) The shipper may install check meters at requisite points with a pre-condition so as not to interfere with the measurement equipment installed by the transporter for custody transfer purpose.
(8) In case of any dispute in metering, the meter proving or certification shall be carried out by an accredited third party as mutually agreed.
(9) In case of any fault in the meter of transporter, the expenses on this account shall be borne by the transporter and in case no fault is found in the meter, the expenses shall be borne by the shipper.
(10) Petroleum and petroleum products accounting shall be done on daily basis or as per mutually agreed billing cycle and the stipulations of Central Excise and Customs department of Government of India and the petroleum and petroleum products reconciliation, billing and other terms shall be as decided between the transporter and shipper in accordance with access arrangement.
11. Obligations at entry point and exit point.
(1) At the entry point, shipper shall furnish certified laboratory reports of the petroleum and petroleum products offered for transportation from the accredited party as mutually agreed.
(2) At the entry point, when the shipper places the petroleum and petroleum products that does not meet the requirements as specified in sub-regulation (3) of regulation 5 and Schedule II, in respect of grade band and threshold level of other elements of petroleum and petroleum products, the transporter may-
(a) refuse to accept it and in such cases shipper shall be liable to pay liquidated damages to the transporter as per the access arrangement; or
(b) accept any petroleum and petroleum products that does not meet the requirements of petroleum and petroleum products in terms of parameters- ¹Hkkx III µ[k.M 4º Hkkjr dk jkti=k % vlk/kj.k 17
(i) as specified in Schedule II:
Provided that transporter may charge reasonable cost of service from the shipper, as may be mutually agreed, for any additional facilities or treatment for cleaning up or integrity requirements of the pipeline and to upgrade petroleum and petroleum products to pipeline specifications:
Provided further that such grade of petroleum and petroleum products do not adversely affect the existing shippers’ quality specifications committed by the transporter at the exit points;
(ii) as specified in sub-regulation (3) of regulation 5:
Provided that the transporter may charge reasonable cost of service for the capacity adjustment from the shipper for transportation of such petroleum and petroleum products and for capacity constraints in the system:
Provided further that such grade of petroleum and petroleum products do not adversely affect the existing shippers’ quality specifications committed by the transporter at the exit points.
(3) At the exit point, when the transporter delivers petroleum and petroleum products that does not meet the quality requirements as specified in sub-regulation (8) of regulation 5, the shipper may -
(a) refuse to accept delivery and in such a case the transporter shall be liable to pay liquidated damages to the shipper as per the access arrangement; or
(b) accept the petroleum and petroleum products provided that shipper may charge reasonable cost of service from the transporter, as may be mutually agreed, for any additional facilities or treatment to upgrade petroleum and petroleum products.
(4) The transmix generated and absorbed between batches of different products during the pipeline transportation will be as specified in the sub-regulation (1) to (7) of the regulation 7.
(5) Any entity authorized by the Board to lay, build, operate or expand a petroleum and petroleum products pipeline under the Petroleum and Natural Gas Regulatory Board (Authorizing Entities to Lay, Build, Operate or Expand Petroleum and Petroleum Products Pipelines) Regulations, 2010 or authorized to do so by the Central Government before the appointed day, can add new entry and exit point or abandon any existing entry and exit point on the pipeline on techno-economic considerations provided that the existing consumers or shippers on the pipeline are not adversely affected by the decision of the entity.
12. Facilities at entry point and exit point.
(1) Shipper shall arrange to deliver petroleum and petroleum products at entry point on the petroleum and petroleum products pipeline or storage facilities of the transporter as per the access arrangement and shall provide the requisite facilities, for custody transfer and delivery of petroleum and petroleum products to the transporter unless otherwise agreed to between shipper and transporter.
(2) Transporter may execute hooking up facility of shipper to the entry point at the cost of shipper.
(3) Shipper or his authorized nominee shall make their own arrangements to operate and maintain facilities upstream of entry points at his own cost and risk unless the facilities are provided by the transporter under a separate contract.
(4) The transporter shall own and operate facilities and measuring equipment at exit point for custody transfer and delivery of petroleum product to the shipper unless otherwise agreed to between shipper and transporter. The transporter may also offer storage facilities at the exit point in case the shipper requires on mutually agreed terms and conditions.
(5) The transporter may execute, at the cost of shipper, the facility of hooking up of shipper facility with that of transporter at exit point.
(6) The shipper shall provide space and cooperate with the transporter in installing, operating, maintaining and modifying any specific exit point facilities when such exit point facilities are provided in the premises of the shipper on mutually agreed terms and conditions.
(7) The shipper may provide check meter, conforming to the applicable standard and specifications, at the exit point in petroleum and petroleum products pipeline:
Provided that in case of any variation in the readings in the meter of transporter and shipper, the reading of the transporter meter shall be taken as final.
18 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III —SEC. 4]
(8) In case of any dispute in metering, the meter proving or certification shall be carried out by an accredited third party as mutually agreed.
(9) In case of any fault in the meter of transporter, the expenses on this account shall be borne by the transporter and in case no fault is found in the meter, the expenses shall be borne by the shipper.
13. Pipeline capacity booking.
(1) More than one shipper can hold capacity at any entry or exit point.
(2) The booked capacity shall be through a contract between shipper and transporter under the access arrangement.
(3) When a transporter receives a request for access from a shipper it shall respond within ten days from the date of receipt of request from the shipper-
(a) confirming that spare capacity exists to satisfy the request and specifying the charges and terms and conditions upon which it will make the service available; or
(b) advising that spare capacity does not exist to satisfy the request; or
(c) advising that the data provided by the shipper require technical study to accommodate his request and such study shall be completed within seven days; or
(d) advising that it is not technically or operationally feasible to provide access.
(4) The shipper may release the capacity in favour of other shippers to the extent of the capacity booked under intimation to the transporter.
(5) The nomination of petroleum and petroleum products for transportation shall contain the expected petroleum and petroleum products flow details of one or more day’s daily-nominated quantities as per the agreed schedule between the shipper and the transporter.
14. Interconnection of common carrier and contract carrier petroleum and petroleum products pipelines.
(1) The interconnection of common carrier and contract carrier pipeline systems may be necessitated by either a transporter or a shipper and such interconnection shall be allowed subject to capacity available in the receiving common carrier pipeline provided it is operationally and technically feasible.
(2) The petroleum and petroleum products specifications for interconnecting pipelines should be compatible and as per regulation 5.
(3) The cost of such interconnection including the infrastructure to facilitate access shall be borne by the entity that has triggered such requirement for interconnection provided it is executed by the transporter.
(4) The execution of the interconnection facilities may also be carried out by the shipper and transporter may facilitate such interconnection.
(5) The interconnection point shall be mutually agreed between transporter and the shipper.
(6) Interconnection of pipeline network is like adding an exit point to the existing pipeline and all such provisions shall be applicable for such interconnection.
(7) The entity denying the interconnection shall inform the Board within a week with the reasons thereof.
15. Methodology for providing access.
(1) The contracted capacity between shipper and transporter shall be in accordance to the provisions of subregulation 5 (6) (i) of the Petroleum and Natural Gas Regulatory Board (Authorizing Entities to Lay, Build, Operate or Expand Petroleum and Petroleum Products Pipelines) Regulations, 2010 and regulation 6 of Petroleum and Natural Gas Regulatory Board (Guiding Principles for Declaring or Authorizing Petroleum and Petroleum Products Pipelines as Common Carrier or Contract Carrier) Regulations, 2012.
(2) The extra capacity for use as common carrier by any third party on open access and non-discriminatory basis shall be allocated on first come first serve basis
16. Planned maintenance.
(1) The transporter is required to draw up and publish a maintenance plan well ahead of time for a defined period identifying those entry and exit points where petroleum and petroleum products flows may be restricted by maintenance works, the extent of the restrictions and the time of occurrence and the transporter shall plan such maintenance so as to minimize disruption to affected parties and can request information from shippers on their survival flows at entry and exit points to assist the transporter for such maintenance schedule.
¹Hkkx III µ[k.M 4º Hkkjr dk jkti=k % vlk/kj.k 19
(2) Dates for scheduled maintenance shall be informed well in advance which can be adjusted on thirty days advance notice to and from affected shippers.
(3) The planned maintenance period shall not exceed ten days in a year but in no case more than five continuous days per event.
(4) Transporter and shipper may further mutually agree upon the time and extent of the scheduled planned maintenance for the shipper’s facilities not affecting the time limits provided for transporter’s maintenance plan at sub-regulation (3).
17. Information about force majeure.
(1) The affected party shall on occurrence of any force majeurea) as soon as reasonably practicable notify each of the other parties of the occurrence and nature of the force majeure, the expected duration thereof insofar as the same can reasonably be assessed and the obligations of the affected party performance of which is affected thereby; and b) from time to time thereafter provide to each other party reasonable details of the following, namely:
(i) developments in the matters notified under clause (a);
(ii) the steps being taken by the affected party to overcome the force majeure occurrence or its effects and to resume performance of its relevant obligations.
(2) The entities shall be relieved of their respective obligations in the event of force majeure except for the obligation to pay when due.
18. Operational planning.
(1) Shipper shall make daily, weekly or monthly nominations to the transporter for the quantities of petroleum and petroleum products that it wishes to deliver to at a particular entry point and off-take at a particular exit point from the pipeline system in line with the provisions under these regulations.
(2) (a) Transporter shall schedule the quantities of petroleum and petroleum products for transportation based on the nominations received and capacity available in the pipeline system.
(b) Transporter may schedule the nomination for quantities of petroleum, and petroleum products over and above the booked capacity subject to a maximum of ten per cent of the declared pipeline capacity.
(3) (a) Transporter shall allocate quantity of petroleum and petroleum products to various shippers as determined under clause (b) of sub-regulation (2) and as per the scheduling exercise.
(b) Allocation scheduled shall be delivered to the shippers as per the destination wise (exit point wise) schedule prepared.
19. Emergencies.
The procedures to be followed by shipper and the transporter in the event of an emergency shall be included in the access arrangement by shipper and transporter on mutually agreed terms.
20. Confidentiality of information.
All documentation, information, data, submissions and comments disclosed or delivered whether in writing or otherwise by any entity to the transporter, shipper or to any other party either in connection with or in consequence of the requirements of these regulations shall be regarded and treated as confidential and shall not be disclosed either in full or part of any or all of the documentation, information, data, submissions and comments including the contents and copies thereof in any form except in connection with any proceedings in any court.
21. Miscellaneous.
(1) The Board may issue guidelines from time to time relating to Access Code for Common Carrier or Contract Carrier Petroleum and Petroleum Products Pipelines.
(2) If any question arises as to the interpretation of these regulations, the same shall be decided by the Board.
20 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III —SEC. 4]
SCHEDULE – I Format for declaring capacity of Pipeline (See regulation 4(2))
1. Name of entity:
2. Name of pipeline:
3. Details of capacity of Pipeline (as per table below):
Name of Section Capacity approved by PNGRB Break up of capacity for period ……….. (MMT) Total Including Common carrier (MMT) Common Carrier (MMT) Own Require ment Firmed-up contracted capacity with other entities for a period of at least one year Common Carrier Capacity with other entities for a period of less than one year Contracted Available Contracted Available
4. Number of entry points on the pipeline route:
5. Location of entry points:
6. Number of exit points:
7. Location of exit points:
8. Technical parameters:
(a) Inlet pressure at entry point:
(b) Grade band at entry point:
(c) Temperature:
(d) Other elements as per Schedule - II:
9. Any demand pending with the transporter for common carrier usage of the pipeline along with duration of such pendency:
10. Preference on entry and exit points:
SCHEDULE – II (See Regulations 5(6), 5(8), 11(2)(b)(i)) Petroleum Product Physical Characteristics Specifications (A) For Motor Spirit ( EURO-IV) (B) For High Speed Diesel (EURO-IV) Parameter Limit Parameter Limit Sulphur (Maximum ppmw) As per latest IS:2796 DENSITY @ 150C, KG/M3 As per latest IS:1460 Research Octane Number (RON) (Minimum) SULPHUR, PPM (Maximum) Benzene, Vol % (Maximum) DISTILLATION 95% Recovery oC (Maximum) Aromatics, Vol% (Maximum) CETANE NO. (Minimum) Olefins, Vol% WATER CONTENT (% by Vol) ¹Hkkx III µ[k.M 4º Hkkjr dk jkti=k % vlk/kj.k 21 (Maximum) (Maximum) Motor Octane Number (MoN) (Minimum) Polycyclic Aromatic Hydrocarbon (PAH) wt (%) Reid Vapour Pressure (RVP) (kPa)(Maximum) Any other parameter (limits as per IS standards) Any other parameter (limits as per IS standards) K. RAJESWARA RAO, OSD (R) [ADVT.-III/4/Exty./188 (166)] Uploaded by Dte. of Printing at Government of India Press, Ring Road, Mayapuri, New Delhi-110064 and Published by the Controller of Publications, Delhi-110054.
(C) For other Petroleum Products Products Specific Gravity (at 15°C) Viscosity (CST) Vapour Pressure (Kg/sq.cm) Liquefied Petroleum Gas (LPG) As per latest IS:4576 Superior Kerosene Oil (SKO) As per latest IS:1459 Aviation Turbine Fuel (ATF) As per latest IS:1571 NAPTHA As per latest Industry Quality Control Manual (IQCM)