APPRENTICESHIP RULES, 1992* In exercise of the powers conferred by, sub-section (1) of Section 37 of the Apprentices Act, 1961 (52 of 1961) and after consulting the Central Apprenticeship Council, the Central Government hereby makes the following rules in supersession of the Apprenticeship Rules, 1962, except as respects things done or omitted to be done before such supersession, namely:-
1. Short title and commencement -
(1) These rules may be called the Apprenticeship Rules, 1992.
(2) They shall come into force on the date of their publication in the Official Gazette.
2. Definitions - In these rules, unless the context otherwise requires:-
(1) "Act" means the Apprentices Act,1961 (52 of 1961);
(2) "Diploma Holder" means a person who holds a diploma in engineering or technology or equivalent qualification granted by a State Board of Technical Education, or recognized by the State Government concerned or the Central Government. (2A) “Diploma in non-engineering” means a person who holds a diploma in nonengineering or equivalent qualification granted by a Board or University or recognised by the concerned State Government or the Central Government, as the case may be;
(3) "Engineering Graduate" means a person, who-
(a) holds a degree in engineering or technology granted by-
(i) a statutory University, or
(ii) an institution empowered to grant such degree by an Act of Parliament;
(b) has passed the graduateship examination of professional bodies recognized by the Central Government as equivalent to degree; or
(c) holds the qualifications which exempt him from Sections A and B examinations of the Institution of Engineers (India). _________________________________________ * Vide GSR No. 188(E), dated 20th March 2001
(4) "Vocational Certificate Holder" means a person who holds a certificate in a Vocational Course, involving two years of study after the completion of secondary stage of school education, recognized by the All India Council for Technical Education;
(5) "National Classification of Occupations" means the National Classification of Occupations adopted by the Government of India, Ministry of Labour, Directorate General of Employment and Training; (5A) “Non-engineering graduate” means a person who holds a degree in any subject other than engineering or technology granted by a statutory University or an institution empowered to grant such degree by an Act of Parliament or passed the graduateship examination of professional bodies recognised by the Central Government as equivalent degree; (5B) “Optional trade apprentice” means an apprentice who is not undergoing apprenticeship training in a designated trade;
(6) "Registered Medical Practitioner" means a person whose name is entered in the register maintained under any law for the time being in force in any State regulating the registration of practitioners of medicine;
(7) " Sandwich Course Student" means a student undergoing a Sandwich Course of studies at any of the technical institutions recognised for the purpose and leading to the award of degree or diploma in engineering or technology;
(8) "Schedule" means the Schedule appended to these rules;
(9) "Standard Industrial Classification" means the Standard Industrial Classification adopted by the Government of India, Ministry of Labour, Directorate General of Employment and Training;
(10) All the words and expressions, not defined here in these rules, but defined in the Act, shall have the same meaning as given to them in the said Act.
3. Standard of Education -
(1) A person shall be eligible for being engaged as a trade apprentice - if he satisfies the minimum educational qualifications as specified in Schedule-1.
(2) A person shall be eligible for being engaged as a Graduate or Technician or Technician (Vocational) apprentice if he satisfies one of the minimum educational qualifications specified in Schedule-IA:
Provided that: -
(a) no Engineering Graduate or Diploma Holder or Vocational Certificate holder who had training or job experience for a period one year or more, after the attainment of these qualifications shall be eligible for being engaged as an apprentice under the Act;
(b) no Sandwich Course Student shall be eligible for being engaged as an apprentice under the Act after passing the final examination of the technical institution wherein such student is undergoing the course unless so approved by the Regional Central Apprenticeship Advisers;
(c) a person who has been a Graduate or Technician or Technician (Vocational) apprentice under the Act and in whose case the contract of apprenticeship was terminated for any reason whatsoever shall not be eligible for being engaged as an apprentice again under the Act without the prior approval of the Apprenticeship Adviser.
4. Standard of Physical Fitness -
(1) A person shall be eligible for being engaged as an apprentice if he satisfies the minimum standards of physical fitness specified in Schedule-II.
Provided that a person who has undergone institutional training in a school or other institution recognised by or affiliated to the National Council or the All India Council or a Statutory University or a State Board of Technical Education and has passed the examination or tests conducted by these bodies, or is undergoing institutional training in a school or institution so recognised or affiliated in order that he may require a degree or diploma in engineering or technology or certificate in vocational course or equivalent qualification shall, if he has already undergone medical examination in accordance with the rules for the admission to the school or institution, be deemed to have complied with the provisions of this rule. *Provided further that the standards of fitness specified for item (4) relating to "EARS" and item (6) relating to “SPEECH" of schedule II shall not apply in the case of a person who is deaf or dumb or deaf and dumb for the following trades, namely:-
(a) Building and Furniture Trades Group:
1. Plumber
2. Carpenter.
3. Furniture and Cabinet Maker. 4 Sports Goods Maker. (Wood)
(b) Draughtsmen and Surveyors Trades Group
1. Draughtsman(Civil) ______________________________________ * Inserted vide GSR No. 338, dated 15th September 1997
(c) Printing Trades Group.
1. Process Cameraman.
2. Retoucher Lithographic.
3. Engraver.
4. Book Binder.
(d) Hotel & Catering Trades Group
1. Cook (General).
2. Cook (Vegetarian).
3. Baker and Confectioner.
(e) Cutting and Tailoring Trades Group.
1. Designer and Master Cutter.
2. Tailor (Men)
3. Tailor (Women)
4. Tailor (General)
(f) Agriculture Trades Group
1. Horticulture Assistant.
(g) Painting Trades Group
1. Painter (General). *(h) Group No.1-Machine Shop Trades Group:
1. Fitter
2. Turner.
3. Machinist**
(i) Group No. 3- Metal Working Trades Group:
1. Sheet Metal Worker.
2. Welder (Gas and Electric)
(j) Group No.4- Electrical Trades Group
1. Wireman.
2. Electrician** **(k). Group No. 5 -Building And Furniture Trade Group
1. Mason (Building Constructor)
(l). Group No. 10 - Heat Engines Trades Group
1. Mechanic (Diesel)
2. Mechanic Tractor
3. Mechanic (Motor Vehicle)
(m). Group No. 11 - Draughtsmen and Survey Trades Group
1. Draughtsman (Mechanical)
2. Surveyor
(n). Group No. 18 – Chemical Trades Group
1. Plastic Processing Operator
2. Instrument Mechanic (Chemical Plant)
3. Laboratory Assistant (Chemical Plant)
4. Attendant Operator (Chemical Plant)
(o). Group No. 20 –Agriculture Trades Group
1. Pump Operator cum Mechanic
(p). Group No. 21 - Leather Crafts Trades Group
1. Upholsterer
2. Leather Goods Maker
(q). Group No. 23 – Electronics Trades Group
1. Electronics Mechanic
(r). Group No. 24 – Photography Trades Group
1. Photographer
(s). Group No. 26 – Beautician Trades Group
1. Hair and Skin Carer
(t). Group No. 29 – Computer Trades Group
1. Desk Top Publishing Operator
2. Programming and Systems Administration Assistant” ** Provided further that the standards of fitness specified for item (3) relating to “Eyes” shall not apply in the case of a person with low vision ( Low vision means a person with impairment of vision of less than 6/18 to 6/10 with best correction in the better eye or impairment of field in any one of the following categories : i) Reduction of fields less than 50 degrees, ii) Heminaopia with macular involvement, iii) Altitudinal defect involving lower fields) for the following trades namely:-
(a). Group No. 1-Machine Shop Trades Group
1. Fitter
2. Turner
3. Machinist
4. Machinist (Grinder)
(b). Group No. 2 -Foundry Trade Group
1. Foundryman
(c). Group No. 3 -Metal Working Trades Group
1. Forger and Heat Treater
2. Sheet Metal Worker
3. Motor Vehicle Body Builder
(d). Group No. 4 - Electrical Trade Group
1. Electrician
2. Wireman
3. Winder (Armature)
4. Electroplater
(e). Group No. 5-Building and Furniture Trades Group
1. Carpenter
2. Plumber
3. Sports Goods Maker (Wood)
4. Furniture and Cabinet Maker
(f). Group No. 6- Maintenance Trades Group
1. Mechanic Sewing Machine
(g). Group No. 9-Refrigeration and Air Conditioning Trades Group
1. Refrigeration and Air-Conditioning Mechanic
(h). Group No. 10-Heat Engines Trades Group
1. Mechanic Diesel
2. Tractor Mechanic
3. Mechanic (Earth Moving Machinery)
4. Auto Mechanic (Two Wheeler/Three Wheeler)
(i). Group No. 14-Printing Group of Trades
1. Book Binder
(j). Group No. 15-Hotel and Catering Trades Group
1. Apprentice Food Production (General)
2. Apprentice Food Production (Vegetarian)
3. Steward
4. Baker and Confectioner
5. Hotel Clerk/Receptionist/Front Office Assistant
6. Fruit and Vegetable Processor
(k). Group No. 16-Textile Trades Group
1. Weaver
2. Knitter (Hosiery)
3. Printing Textile
(l). Group No. 19-Cutting and Tailoring Trades Group
1. Designer and Master Cutter
2. Tailor (Men)
3. Tailor (Women)
4. Tailor (General)
(m). Group No. 20-Agriculture Trades Group
1. Mechanic (Agricultural Machinery)
2. Horticulture Assistant
3. Stockman (Dairy)
4. Attendant Operator (Dairy)
5. Pump Operator cum Mechanic
(n). Group No. 21-Leather Crafts Trades Group
1. Sport Goods Maker (Leather)
2. Leather Goods Maker
3. Footwear Maker
4. Finished Leather Maker
5. Maintenance Mechanic for Leather Machinery
6. Upholsterer
(o). Group No. 25-Iron and Steel Trades Group
1. Brick Layer (Refractory)
2. Furnace Operator (Steel Industry)
3. Steel Melting Hand
(p). Group No. 26-Beautician Trades Group
1. Beautician
2. Hair Dresser
3. Health and Slimming Assistant
4. Hair and Skin Carer
(q). Group No. 28-Painting Trades Group
1. Painter (General) ( r ). Group No. 29-Computer Trades Group
1. Desk Top Publishing Operator
2. Programming & Systems Administration Assistant
(s). Group No. 30-Hi-Tech Trades Group
1. Advanced Attendant Operator (Process)
2. Operator Cum Mechanic Pollution Control Equipment
3. Mechanic Medical Equipment for Hospitals and Occupational and Health Centres
(t). Group No. 31-Multi Skill Trades Group
1. Mechanic Advanced Machine Tool Maintenance
2. Operator Advanced Machine Tool
Provided further that the standards of fitness specified for item (11) relating to “skeletal system” will be relaxed in the case of a Orthopadically handicapped person for the following trades as mentioned against each trade, namely:-
(a) Group No. 1-Machine Shop Trades Group Fitter Lower limb partially damaged from one side can join Turner Lower limb partially damaged from one side can join. Machinist Only small finger damaged can join. Machinist (Grinder) Only small finger damaged can join.
(b) Group No. 2 - Foundry Trades Group Pattern Maker One upper & lower limb partially damaged can join.
(c) Group No. 3 - Metal Working Trades Group Welder (Gas and Electric) A person with out leg and without three finger of one hand can be accommodated Sheet Metal Worker Both Lower limb damaged can be accommodated.
(d) Group No. 4 - Electrical Trades Group Electrician Partially lower limb students can be accommodated.
(e) Group No. 5 - Building & Furniture Trades Group Plumber A person without one or two finger of foot & hand can be accommodated. Carpenter One upper & lower limb partially damaged.
(f) Group No.6 - Maintenance Trades Group Mechanic Maintenance (Chemical Plant) With one lower limb partially damaged can be accommodated.
(g) Group No. 7-Precision Machining Trades Group Tool and Die Maker (Die and Moulds) Lower limb partially damaged only one side can be accommodated. Small finger of each hand damaged can be accommodated. Tool and Die Maker (Press Tools, Jigs and Fixtures) Lower limb partially damaged only one side can be accommodated. Small finger of each hand damaged can be accommodated.
(h) Group No. 8 - Instrument Trades Group Mechanic Watch And Clock Both lower limbs
(i) Group No. 9- Refrigeration and Air Conditioning Trades Group Refrigeration and Air Conditioning Mechanic Only one lower limb partially working can be accommodated. Small finger of each hand damaged can be accommodated
(j) Group No. 10 - Heat Engines Trades Group Mechanic (Diesel) Upper limb partially damaged (Little finger and Ring Finger) can be accommodated for both hands. Lower limb partially damaged only one side can be accommodated. Tractor Mechanic Upper limb partially damaged (Little finger and Ring Finger) can be accommodated for both hands Lower limb partially damaged only one side can be accommodated. Mechanic Motor Vehicle Upper limb partially damaged (Little finger and Ring Finger) can be accommodated for both hands. Lower limb partially damaged only one side can be accommodated
(k) Group No. 11- Draughtsmen and Surveyor Trades Group Draughtsman (Civil) Partially without both legs or without one leg & upper left limb damaged. Draughtsman (Mechanical) Partially without both legs or without one leg & upper left limb damaged. Surveyor One lower limbs partially damaged
(l) Group No. 14-Printing Group of Trades Offset Machine Minder One lower or one upper limb. Process Cameraman One lower or one upper limb. Book Binder One lower limb or both lower limbs with artificial leg.
(m) Group No. 15-Hotel and Catering Trades Group Baker And Confectioner One lower or one upper limb.
(n) Group No. 18- Chemical Trades Group Instrument Mechanic (Chemical Plant) With one lower limb partially damaged can be accommodated. Maintenance Mechanic (Chemical Plant) With one lower limb partially damaged can be accommodated. Attendant Operator (Chemical Plant) With one lower limb partially damaged can be accommodated. Laboratory Assistant (Chemical Plant) With one lower limb partially damaged can be accommodated. Plastic Processing Operator One lower limb partially damaged.
(o) Group No. 20-Agriculture Trades Group Pump Operator Cum Mechanic Upper limb partially damaged (Little finger and Ring Finger can be accommodated for both hands. Lower limb partially damaged only one side can be accommodated. Mechanic Agricultural Machinery Upper limb partially damaged (Little finger and Ring Finger can be accommodated for both hands. Lower limb partially damaged only one side can be accommodated. Lower limb partially damaged from one side.
(p) Group No. 21- Leather Crafts Trades Group Leather Goods Maker One lower or one upper limb. Upholsterer Both lower limbs
(q) Group No. 23-Electronics Trades Group Electronics Mechanic Without legs or leg.
(r) Group No. 26 - Beautician Trades Group Hair and Skin Carer Partially without one lower limb & one/two lower limbs totally damaged can be adjusted.
( s ) Group No. 28 – Painting Trades Group Painting General One upper & lower limb partially damaged.
(t) Group No. 29 - Computer Trades Group Desk Top Publishing Operator Both lower limbs Programming and Systems Administration Assistant” Both lower limbs
(2) Without prejudice to the generality of the foregoing provision where a physically handicapped person registered at any Employment Exchange is declared, by either the medical board attached to Special Employment Exchanges. for the physically handicapped or the local Civil Surgeon (where such Medical Board has not been constituted) to be physically fit for being engaged as an apprentice in any of the designated trades under the Apprentices Act, 1961, he may be engaged as an apprentice in that trade.
5. Reservation of Training Places:-
(1) In respect of each of the states specified in column (2) of the Schedule-IIA training places shall be reserved by the employer for the Schedule Castes and Scheduled Tribes in every designated trade so that the ratio of the apprentices belonging to the Scheduled Castes and Scheduled Tribes to the total number of apprentices in such designated trade or trades shall be specified in columns (3) and (4) of the said Schedule (and where there is more than one designated trade in an establishment such training places shall be reserved also on the basis of total number of apprentices in all designated trades in such establishments).
Provided that when the prescribed number of persons belonging either to the Scheduled Castes or to the Scheduled Tribes are not available, the training places so reserved for them may be filled by persons belonging to the Scheduled Tribes or as the case may be, to the Scheduled Caste and if the prescribed training places can not be filled even in the above given manner, then the training places so lying unfilled may be filled by persons not belonging to the Scheduled Castes or the Scheduled Tribes. ____________________________________________ * Inserted vide GSR No. 107, dated 27th May 1998 ** Inserted vide GSR No. 300, dated 23rd August 2003
2. The training places for the Other Backward Classes in designated trades shall be reserved by the employer according to the prescribed norms followed in the respective State or Union territory and if training places can not be filled from the Other Backward Classes, then the training places so lying unfilled may be filled by persons not belonging to the Other Backward Classes.
6. Registration of Contract of Apprenticeship:- 1(a) The Central Government may specify model contract form for all apprentices;
(b) The model contract form as may be specified by the Central Government with such variation as the circumstances of each case may require, be used for the respective purposes therein mentioned.
(2) The obligation of the employer and that of the trade apprentice shall be as specified in Schedule-V. The terms and conditions in respect of graduate, technician and technician (vocational) apprentices shall be as specified in Schedule-VI.
7. Period of Apprenticeship Training -
(1) The period of apprenticeship training in the case of trade apprentices referred to in clause (a) clause (aa) and clause (b) of Section 6 of the Act shall be as specified in Schedule-I. (1A) The period of apprenticeship training in the case of trade apprentices referred to in clause (aa) of section 6 of the Act, shall be as specified in Schedule-I-B.
(2)(a) Where a trade apprentice is unable to complete the full apprenticeship course within the periods prescribed in sub-rule (1) or to take the final test owing to illness or other circumstances beyond his control, the establishment concerned shall extend the period of his apprenticeship until he completes the full apprenticeship course and the next test is held if so required by the Apprenticeship Adviser, Similar extension of the period of training may also be allowed in the case of those trade apprentices who having completed the course, fail in the final test. A trade apprentice who fails in the second test shall not be allowed any extension of the period of training.
(b) (i) Where a trade apprentice is unable to complete the period of apprenticeship training due to strike or lockout or layoff in an establishment where he is undergoing training and is not instrumental for the same, the period of his apprenticeship training shall be extended for a period equal to the period of strike or lockout or layoff , as the case may be, and he shall be paid stipend during the period of such strike or lockout or layoff or for a maximum period of six months, whichever is less;
(ii) If the strike or lockout or layoff is likely to continue for a longer period, the employer shall follow the procedure for novation of contract of apprenticeship of a trade apprentice referred to in clause (i) with the other employer as specified in section 5 of the Act.
(2) In the case of trade apprentices other than those covered by clause (a) of section 6 of the Act, the first six months of the period of training shall be treated as period of probation. 3A(1)* Keeping in view seasonality in operation or business or flexibility desired by trade apprentice, a trade apprentice may complete his period of apprenticeship training within five years or double the duration of apprenticeship training whichever is less from the date of starting of his apprenticeship training.
(2) The flexibility referred to in sub-rule(1) shall be permissible in the following manner, namely:-
(a) Maximum one break for trades having duration two years or less than two years;
(b) Maximum two breaks for trades having duration more than two years.
(3) The start and end date of his apprenticeship training shall be reported on portal-site by the employer.
(4)(a) The period of apprenticeship training in the case of Engineering Graduates, Diploma holders and Vocational Certificate holders shall be one year.
(b) In the case of Sandwich Course Students, the period of practical training they undergo as part of apprenticeship course of studies shall be the period of apprenticeship training.
(c) Where a Graduate/Technician/Technician (Vocational) Apprentice is unable to complete the period of Apprenticeship Training due to strike/lockout/ layoff in as establishment where he is undergoing training and is not instrumental in the same, the period of his Apprenticeship Training would be extended equal to the period of strike/ lockout/ layoff and he shall be paid stipend during the period of such strike/ lock out / layoff or for a maximum period of six months whichever is less.
(d) If the strike/lock out/ lay off is likely to continue for a longer period, the employer shall follow the procedure for novation of contract of apprenticeship for the apprentices referred to in clause (c) with the other employer as specified in section 5 of the Act. [7A** Regulation of optional trade.-
(1). A person shall not be qualified for being engaged as an apprentice to undergo apprenticeship training in any optional trade, unless he-
(a) is not less than fourteen years of age, and for optional trades related to hazardous industries, not less than eighteen years of age; and
(b) satisfies such physical fitness as determined by the employer.
(2) The minimum educational qualification for person to undergo apprenticeship training in optional trade shall be fifth class pass from a recognised school.
(3) The period of apprenticeship training in the case of non-engineering graduates, diploma in non-engineering and vocational certificate holder shall be maximum one year and the period of apprenticeship training for other apprentices undergoing apprenticeship training in optional trade shall be minimum of six months and maximum of two years.
(4) The training places shall be reserved by the employer for the Scheduled Castes and the Scheduled Tribes in every optional trade in accordance with the subrule (1) of rule 5 and Schedule-IIA of said rule.
(5) The training places for the Other Backward Classes shall be reserved by the employer in every optional trade in accordance to the sub-rule (2) of rule 5.
(6) It shall be obligatory on the part of employer to disclose the duration and syllabi of the optional trades on the portal-site.
(7) The work diary in Format-2 as specified in Schedule-III shall be maintained by each apprentice and countersigned by his supervisor once in a week.
(8) Weekly hours of work provided in sub-rule (3) of rule 12 shall be applicable for those apprentices possessing a degree of three or four years after secondary or higher secondary education or diploma of three years after 10th class or diploma of two years after 12th pass or a certificate in vocational course involving two years of study after completion of secondary stage of school education and undergoing apprenticeship training in optional trade and for all other apprentices undergoing apprenticeship training in optional trade, the weekly hours of work provided in sub-rule (1) and (2) of rule 12 shall be applicable.
(9) No person shall be engaged as an apprentice to undergo apprenticeship training in optional trade unless such person or, if he is minor, his guardian has entered into a contract of apprenticeship with the employer and such contract of apprenticeship shall be uploaded on portal-site by the employer.
(10) The minimum rates of stipend prescribed for graduate apprentices shall be paid by the employer to those apprentices who possess a degree of minimum three years duration after 10+2 system of education.
(11) The minimum rates of stipend prescribed for technician apprentices shall be paid by the employer to those apprentices who possess a diploma of three years after 10th class or diploma of two years after 12th pass.
(12) The minimum rates of stipend prescribed for technician (vocational) apprentices shall be paid by the employer to those apprentices who possess a certificate in vocational course involving two years of study after completion of secondary stage of school education.
(13) The minimum rates of stipend prescribed for trade apprentices shall be paid by the employer to other apprentices undergoing training in optional trade according to their period of apprenticeship training.
(14) Every apprentice possessing a degree of minimum three years or a diploma of three years after 10th class or diploma of two years after 12th pass or a certificate in vocational course involving two years of study after completion of secondary stage of school education and undergoing apprenticeship training in optional trade shall follow the terms and conditions of contract of apprenticeship for graduate, technician and technician(vocational) apprentices as provided in Schedule-VI.
(15) Every employer and other apprentices undergoing training in optional trade shall have the obligations as provided in Schedule-V respectively.
(16) The employer shall not run a trade as optional which is a designated trade under the Act.
(17) The progress in apprenticeship training of every apprentice in optional trade shall be assessed by the employer from time to time and every apprentice who completes his apprenticeship training to the satisfaction of the employer shall be granted a certificate of proficiency by that employer. 7B Number of apprentices for designated and optional trade.-
(1) The employers having six or more workers shall only be eligible to engage apprentices and engagement of apprentices by establishment having number of workers not exceeding forty shall not be obligatory.
(2) The strength of workers shall be calculated on the basis of average strength in the preceding financial year.
(3) Within a financial year, each establishment shall engage apprentices in a band of 2.5 per cent. to 10 per cent. of the total strength of the establishment including contractual staff.
(4) In no month, number of apprentices should be less than 2 per cent. of the total strength of the establishment and more than 15 per cent. of the total strength of the establishment subject to the condition that he shall fulfill apprentice months corresponding to 2.5 per cent. obligation in a financial year.
(5) Every employer shall disclose their intention of engagement of apprentices both in designated and optional trade on portal site as well as establishment’s portalsite (if existing) as per quarters given below:-
(a) the 1st April to the 30th June;
(b) the 1st July to the 30th September;
(c) the 1st October to the 31st December;
(d) the 1st January to the 31st March.. 7C Inspection of establishment.- An Officer not below the rank of Assistant Apprenticeship Adviser shall inspect an establishment and such inspection shall be after prior approval of the Central or the State Apprenticeship Adviser, as the case may be]. 8* Compensation for termination of apprenticeship: Where the contract of apprenticeship is terminated through failure on the part of any employer in carrying out the terms and conditions thereof, such employer shall be liable to pay the apprentice compensation of an amount equivalent to his three months last drawn stipend.
9. Qualifications of persons placed in charge of the training of apprentices:- A person placed in charge of the training of apprentices by the employer shall possess the qualifications specified in Schedule IV to these rules. The person so appointed shall be of the appropriate level commensurate with the number of seats located for apprenticeship training and size of the establishment. 9** a Staffing pattern and qualifications of instructional staff for practical and basic training of apprentices Staffing pattern and qualifications of instructional staff for imparting practical and basic training to apprentices shall be as specified in Schedule IV A
10. Maintenance of record of work by apprentices:- Every Graduate or Technician or Technician (Vocational) Apprentice shall maintain a daily record of the work done by him relating to the apprenticeship training in the form of a workshop or laboratory note book. __________________________________________________ * Substituted vide GSR No. 404, dated 25th November 1997 ** Inserted vide GSR No. 190(E) dated 26th February, 1999 *11. Payment of stipend to apprentices:-
(1) The minimum rate of stipend per month payable to trade apprentices shall be follows, namely:-
(a) During the first year of training : Seventy per cent. of minimum wage of semi-skilled workers notified by the respective State or Union territory
(b) During the second year of training : Eighty per cent. of minimum wage of semiskilled workers notified by the respective State or Union territory
(c) During the third and fourth year of training : Ninety per cent. of minimum wage of semiskilled workers notified by the respective State or Union territory:
Provided that in the case where the minimum rate of wage for a trade is not notified by the State Government or Union territory, then, the maximum of minimum wages of the Scheduled Employment notified by such State Government or Union territory for semi-skilled workers shall be taken into account for paying the stipend in respect of that trade:
Provided further that in the case of trade apprentices referred to in clause
(a) of section 6 of the Act, the period of training already undergone by them in a school or other institution recognised by the National Council, shall be taken into account for the purpose of determining the rate of stipend payable”.
(2)** The minimum rates of stipend payable to Graduate, Technician and Technician (Vocational) Apprentices shall be as follows namely:- a. Graduates Apprentices Rs. 4984/-per month b. Sandwich course Rs.3542/-per month. (Students from Degree institutions) c. Technician Apprentices Rs.3542/-per month d. Sandwich course Rs.2890/-per month. (Students from Diploma institutions) e. Technician (Vocational) Apprentices. Rs.2758/-per month.
3. The stipend for a particular month shall be paid by the tenth day of the following month and the stipend shall be paid through the bank account of apprentices. ______________________________________________________________ * Substituted by GSR No. 680(E), dated 22nd September, 2014 ** Substituted by GSR No. 910(E), dated 23rd December, 2014
(4) No deduction shall be made from the stipend for the period during which an apprentice remains on casual leave or medical leave. Stipend shall, however, not be paid for the period for which an apprentice remains on extraordinary leave.
(5) Notwithstanding anything contained in this rule, where an establishment has a system of deferred payment whereby only a portion of the stipend is paid to the apprentice every month and the balance is paid to the apprentice on the completion of training such establishment shall be free to continue such system provided that the minimum amount paid to the apprentices every month shall not be less than the monthly stipend prescribed under these rules and no deduction is made from the said accumulated amount on any account. Establishments which do not already have such a system shall be free to institute a system on the same conditions.
(6) The continuance of payment of stipend to an apprentice shall be subject to the work and conduct of the apprentice being satisfactory.
(7) Where the work and conduct of the apprentice is not satisfactory, the employer shall report the matter to the Apprenticeship Adviser and with his consent may stop the continuance of payment of stipend to the apprentices.
Provided that the stipend of an apprentice shall not be stopped without intimating him the grounds thereof and giving him an opportunity of representing against the action proposed.
(8) On report being made by the employer under sub-rule (7) the Apprenticeship Adviser shall give his decision thereon within thirty days of the receipt of the report and where the Apprenticeship Adviser does not communicate to the employer refusal to consent to the stopping of the payment of stipend within the period of thirty days, it shall be deemed that he has consented to the stopping of the stipend
12. Hours of work:-
(1) The weekly hours of work of a trade apprentice undergoing practical training shall be as follows, namely:-
(a) The total number of hours per week shall be 42 to 48 hours (including the time spent on Related Instruction)
(b) Trade apprentices undergoing basic training shall ordinarily work for 42 hours per week including the time spent on Related Instruction.
(c) Trade apprentices during the second year of apprenticeship shall work for 42 to 45 hours per week including the time spent on Related Instruction.
(d) Trade apprentice during the third and subsequent years of apprenticeship shall work for the same number of hours per week as the workers in the trade in the establishment in which the trade apprentice is undergoing apprenticeship training.
(2) No trade apprentice shall be engaged on such training between the hours of 10.00 p.m. to 6.00 a.m.. except with the prior approval of the Apprenticeship Adviser who shall give his approval if he is satisfied that it is in the interest of the training of the trade apprentice or in public interest.
(3) Graduate, Technician and Technician (Vocational ) Apprentices shall work according to the normal hours of work of the department in the establishment to which they are attached for training. 13*. Grant of leave to apprentices 14**. Record and returns
(1) A contract of apprenticeship as entered between an apprentice and the employer as per Format-1 specified in Schedule III shall be forwarded on the portal-site by the employer for registration.
(2) Work dairy in Format – 2 as specified in Schedule III shall be maintained by each Trade apprentice and Optional trade apprentice and countersigned by his supervisor once in a week.
(3) Every employer shall maintain a register of attendance of the apprentices undergoing apprenticeship training in his establishment and action taken for irregular and unauthorised absence shall be recorded in the said register at the end of each month.
(4) Every employer shall maintain a record of the work done and training undertaken by the graduate, technician and technician (vocational) apprentices engaged in his establishment, for each quarter and at the end of each quarter shall send a report in Form Apprenticeship specified in Schedule-III to the Director, Regional Board of Apprenticeship Training concerned.” ________________________________________________ * Omitted vide GSR No. 502(E) dated 18th June, 2015 ** Substituted vide GSR No. 63(E) dated 20th January, 2017 List of Designated Trades under the Apprentices Act, 1961
SCHEDULE – I [ See rule 3 (1) and rule 7 (1)] Sl. No. Designated Trades N.C.O. Code No. Period of Apprenticeship Training National Council for Vocational Training approved trades or State Council for Vocational Training approved trades or Apprenticeship trades Rebate allowed in Apprenticeship Training Essential/ Desirable Educational Qualifications 1 2 3 4 5 6 7 Group No.1 – Machine Shop Trades Group:
1. Fitter 7233.10, 7233.20 Two years 1. Fitter One year Passed 10th class examination with Science and Mathematics under 10+2 system of education or its equivalent.
2. Turner 8211.15 Two years 1. Turner One year Passed 10th class examination with Science and Mathematics under 10+2 system of education or its equivalent.
3. Machinist 8211.10,8211.15
8211.22,8211.28
8211.30,8211.32
8211.36,8211.38 Two years 1. Machinist One year Passed 10th class examination with Science and Mathematics under 10+2 system of education or its equivalent.
4. Machinist (Grinder)
7224.10, 7224.30
7224.40, 7224.45
8211.15 Two years 1. Machinist (Grinder)
2. Machinist
3. Turner One year One year One year Passed 10th class examination with Science and Mathematics under 10+2 system of education or its equivalent. Group No.2 – Foundry Trades Group:
1. Pattern Maker 7522.1000 Two years 1. Carpenter
2. Pattern Maker Three months Three months Passed 8th class Examination under 10+2 system of education or its equivalent.
2. Foundryman 7211.50, 8123.10 Two years 1. Foundryman One year Passed 10th class examination with Science and Mathematics under 10+2 system of education or its equivalent. Group No.3 – Metal Working Trades Group:
1. Forger and Heat Treater
7221.50,7223.30
8152.75,8152.90 Two years --- --- Passed 10th class examination under 10+2 system of education or its equivalent.
2. Sheet Metal Worker
7213.10,7213.30
7213.90,8211.61 Two years 1. Sheet Metal Worker One year Passed 8th class examination from a recognised school.
3. Welder (Gas & Electric)
7212.10,7212.20
7212.40,7212.50
7212.65 One year and three months
1. Welder Three months Passed 8th class examination from a recognised school.
4. Motor Vehicle Body Builder
7422.25 7422.30 Two years 1. Sheet Metal Worker
2. Welder One year One year Passed 10th class examination under 10+2 system of education or its equivalent. Group No.4 –Electrical Trades Group:
1. Electrician 7137.10,7241.20 Two years 1. Electrician One year Passed 10th class examination with Science and Mathematics under 10+2 system of education or its equivalent.
2. Lineman 7245.10 Two years 1. Wireman
2. Electrician One year One year Passed 8th class examination from a recognised school.
3. Wireman 7137.20 Two years 1. Wireman
2. Electrician One year One year Passed 8th class examination from a recognised school.
4. Mechanic Auto Electrical and Electronics
7241.10,7241.70 Two years 1. Mechanic Auto Electrical and Electronics One year Passed 10th class examination under 10+2 system of education or its equivalent.
5. Electrician Aircraft
7241.60 Two years 1. Electrician One year Passed 10th class examination under 10+2 system of education or its equivalent.
6. Electrical Winder
7241.40 Two years 1. Electrician One year Passed 10th class examination under 10+2 system of education with Science and Math as a subject or its equivalent.
7. Cable Jointer 7245.20 Two years 1. Wireman
2. Electrician One year One year Passed 8th class examination from a recognised school.
8. Electrician (Mines)
851.15 Three years Electrician Two years Passed 10th class examination under 10+2 system of education with Science (Physics and Chemistry) as one of subject or its equivalent.
9. Electroplater 8223.10 Two years 1. Electroplater One year Passed 10th class examination under 10+2 system of education or its equivalent. Group No.5 – Building and Furniture Trades Group:
1. Carpenter 7124.10,7124.20 Two years 1. Carpenter One year Passed 8th class examination from a recognised school.
2. Plumber 7136.10,7136.30 Two years 1. Plumber One year Passed 10th class examination under 10+2 system of education or its equivalent.
3. Mason (Building
7122.20 Two years 1. Mason Building Constructor One year Passed 8th class examination under Constructor) 10+2 system of education or its equivalent.
4. Furniture and Cabinet Maker
812.10, 812.20 Three years Carpenter One year Passed 8th class examination under 10+2 system of education with science as subject or its equivalent. ‘Desirable’:- Passed in 10th class examination under 10+2 system of education with Science as one of the subject or its equivalent.
5. Sports Goods Maker (Wood)
819.70 Two years Sports Goods Maker (Wood) One year Passed 8th class examination under 10+2 system of education or its equivalent. 6, Mechanic (Lift and Escalator)
8333.70 Two years 1. Mechanic (Lift and Escalator)
2. Lift Mechanic One year One year Passed 10th class examination under 10+2 system of education or its equivalent.
7. Building Maintenance Technician
3112.90 One year and three months
1. Mason (Building Constructor)
2. Building maintenance Three months Three months Passed 10th class examination under 10+2 system of education with Science and Mathematics or its equivalent.
8. Architectural Assistant
3118.10 Two years 1. Architectural Assistant One year Passed 10th class examination under 10+2 system of education or its equivalent.
9. Sanitary Hardware Fitter
7136.10 One year and three months
1. Sanitary Hardware Fitter
2. Plumber Three months Three months Passed 8th class examination from a recognised school.
10. Interior Designer and Decorator
3471.10 Two years 1. Interior Design and Decoration One year Passed 10th class examination under 10+2 system of education or its equivalent. Group No.6 – Maintenance Trades Group:
1. Mechanic Machine Tool Maintenance
8281.55,8281.10 Two years 1. Mechanic Machine Tool Maintenance One year Passed 10th class examination under 10+2 system of education or its equivalent.
2. Mechanic Maintenance (Textile Machinery)
845.63 Three years Fitter One year Passed 10th class examination under 10+2 system of education with Science (Physics and Chemistry) as subjects or its equivalent.
3. Maintenance Mechanic (Chemical
8159.79 Two years 1. Maintenance Mechanic (Chemical Plant) One year Passed 10th class examination with Science and Plant) Mathematics under 10+2 system of education or its equivalent.
4. Mechanic (Dairy Maintenance)
845.55 Three years 1. Fitter
2. Tool & Die Maker
3. Refrigeration and Airconditioning Mechanic One year One year One year Passed 10th class examination under 10+2 system of education with Science and Math as subjects or its equivalent.
5. Mechanic Sewing Machine
945.82 One year Fitter Six months Passed 10th class examination under 10+2 system of education or its equivalent.
6. Mechanic (Mining Machinery)
845.60 Three years Fitter One year Passed 10th class examination under 10+2 system of education with Science (Physics and Chemistry) as subjects or its equivalent.
7. Material Handling Equipment Mechanic-cum- Operator
9333.10 Two years 1. Mechanic Machine Tool Maintenance One year Passed 10th class examination under 10+2 system of education or its equivalent. Group No.7 – Precision Machining Trades Group:
1. Tool and Die Maker (Dies and Moulds)
7222.50,7222.60
7211.10,7211.50 Two years 1. Tool and Die Maker (Dies and Moulds) One year Passed 10th class examination with Science and
2. Tool and Die Maker (Press Tools, Jigs and Fixtures)
3. Machinist One year One year Mathematics under 10+2 system of education or its equivalent.
2. Tool and Die Maker (Press Tools, Jigs and Fixtures)
7222.20,7222.30
7222.50,8211.10
8211.15,8211.22
8211.30,8211.38
8211.55,8211.70 Two years 1. Tool and Die Maker (Press Tools, Jigs and Fixtures)
2. Tool and Die Maker (Dies and Moulds)
3. Machinist One year One year One year Passed 10th class examination with Science and Mathematics under 10+2 system of education or its equivalent.
3. Plastic Mould Maker
7222.50,8232.65 Two year 1. Tool and Die Maker (Dies and Moulds)
2. Tool and Die Maker (Press Tools, Jigs and Fixtures) One year One year Passed 10th class examination with Science and Mathematics under 10+2 system of education or its equivalent. Group No.8 – Instrument Trades Group:
1. Instrument Mechanic
7311.10,7311.30
7311.60,7311.90 Two years 1. Instrument Mechanic One year Passed 10th class examination under 10+2 system of education or its equivalent.
2. Mechanic Instrument Aircraft
7311.10,7311.67 Two years 1. Instrument Mechanic One year Passed 10th class examination under 10+2 system of education or its equivalent.
3. Mechanic Watch and Clock
841.10 Three years Mechanic Watch and Clock Two years Passed 10th class examination under 10+2 system of education or its equivalent. Group No.9 – Refrigeration and Air-Conditioning Machine Shop Trade Group:
1. Mechanic Refrigeration and Air Conditioning
845.706 Two years 1. Mechanic Refrigeration and Air Conditioning One year Passed 10th class examination under 10+2 system of education or its equivalent. Group No.10 – Heat Engines Trades Group:
1. Mechanic (Motor Vehicle)
7231.10 Two years 1. Mechanic (Motor Vehicle) One year Passed 10th class examination with Science and Mathematics under 10+2 system of education or its equivalent.
2. Mechanic Diesel
7233.24 Two years 1. Mechanic Diesel One year Passed 10th class examination under 10+2 system of education or its equivalent.
3. Mechanic Tractor
7231.10 Two years 1. Mechanic Tractor One year Passed 10th class examination under 10+2 system of education or its equivalent.
4. Mechanic Earth Moving
735.41 Two years --- ---- Passed 10th class examination under Machinery 10+2 system of education or its equivalent.
5. Mechanic (Marine Diesel)
845.14 Three years Mechanic Diesel One year Passed 8th class examination or its equivalent.
6. Driver-cum- Mechanic (Light Motor Vehicle)
8322.10 One year and three months
1. Driver-cum- Mechanic (Light Motor Vehicle) Three months Passed 10th class examination under 10+2 system of education or its equivalent.
7. Mechanic Motor Cycle
7122.20 One year and three months
1. Mechanic Motor Cycle
2. Mechanic Repair and Maintenance of two wheeler Three months Three months Passed 10th class examination under 10+2 system of education or its equivalent
8. Construction Machinery Mechanic-cum- Operator
7233.28
7233.30
7233.90
8332.00 Two years 1. Mechanic(Motor Vehicle) One year Passed 10th class examination of 10+2 system of education or its equivalent.
9. Mechanic Repair and Maintenance of Vehicle
7231.10 Two years 1. Mechanic Repair and Maintenance of Light Vehicle
2. Mechanic Repair and Maintenance of Heavy Vehicle One year One year Passed 10th class examination under 10+2 system of education or its equivalent. 10 Technician (Automotive Manufacturing)
8281.65,8281.70 Two years 1. Fitter
2. Automotive Manufacturing One year One year Passed 10th class examination with Science and Mathematics under 10+2 system of education or its equivalent. 11 Marine Engine Fitter
7233.22 Two years 1. Marine Engine Fitter One year Passed 10th class examination with Science and Mathematics under 10+2 system of education or its equivalent. Group No.11 – Draughtsman and Survey Trades Group:
1. Draughtsman (Civil)
3118.20,3118.50 Two years 1. Draughtsman (Civil) One year Passed 10th class examination under 10+2 system of education or its equivalent.
2. Draughtsman (Mechanical)
3118.40 Two years 1. Draughtsman (Mechanical) One year Passed 10th class examination with Science and Mathematics under 10+2 system of education or its equivalent.
3. Surveyor 2148.20 3112.30
3112.40 Two years 1. Surveyor One year Passed 10th class examination under 10+2 system of education or its equivalent. Group No.12 – Construction Trades Group:
1. Fitter structural 7214.70 Two years 1. Fitter One year Passed 10th class examination with Science and Mathematics under 10+2 system of education or its equivalent. Group No.13 – Power Plant Trades Group:
1. Boiler Attendant
8162.20 Two years --- --- Passed 10th class examination with Science and Mathematics under 10+2 system of education or its equivalent.
2. Steam Turbinecum-Auxiliary Plant Operator
8161.30 Two years --- --- Passed 10th class examination under 10+2 system of education or its equivalent.
3. Switch Board Attendant
8161.50 Two years --- --- Passed 10th class examination under 10+2 system of education or its equivalent. Group No.14 – Printing Trades Group:
(i) Type Setting Group:
1. Lino Operator 922.10 Three years Hand Compositor One year Passed 10th class examination under 10+2 system of education with proficiency in English and any regional language or its equivalent.
2. Mono Keyboard Operator
922.20 Three years Hand Compositor One year Passed 10th class examination under 10+2 system of education with proficiency in English and any regional language or its equivalent.
3. Mono Castor Operator
922.30 Two years Hand Compositor One year Passed 10th class examination under 10+2 system of education with proficiency in English and any regional language or its equivalent.
(ii) Photo Mechanic Group
1. Process Cameraman
926.10 Three years --- --- Passed 10th class examination with Physics and Chemistry as subject under 10+2 system of education or its equivalent.
2. Retoucher Lithographic
925.10 Three years --- --- Passed 10th class examination with Physics and Chemistry as subject under 10+2 system of education or its equivalent.
3. Engraver 926.50 Three years --- --- Passed 10th class examination with Physics and Chemistry as subject under 10+2 system of education or its equivalent.
(iii) Binding Group
1. Book Binder 927.10 Two years Book Binder One year Passed 8th class examination under 10+2 system of education or its equivalent.
(iv) Litho Offset Group
1. Plate Maker (Lithographic)
926.40 Two years --- --- Passed 10th class examination under 10+2 system of education with Physics and Chemistry as subject or its equivalent.
2. Offset Machine Minder
923.50, 923.60 Three years --- --- Passed 10th class examination under 10+2 system of education with Physics and Chemistry as subject or its equivalent. Group No.15 – Hotel and Catering Trades Group:
1. Food Production (General) 1217 Two years 1. Food Production (General) One year Passed 8th class examination or its equivalent.
2. Food Production (Vegetarian)
520.20 Two years 1. Food Production (Vegetarian) One year Passed 10th class examination under 10+2 system of education or its equivalent.
3. Steward 5123.40 One year and three months
1. Catering and Hospitality Management
2. Food and Beverages Services Assistant Three months Three months Passed 10th class examination under 10+2 system of education or its equivalent.
4. Baker and Confectioner
777.10 Two years Baker and Confectioner Six months Passed 10th class examination under 10+2 system of education or its equivalent.
5. House Keeper (Hotel)
5121.10 One year and three months
1. House Keeper
2. Domestic House Keeping
3. Corporate Housekeeping
4. Institution House Keeping Three months Three months Three months Three months Passed 10th class examination under 10+2 system of education or its equivalent.
6. Receptionist/ Hotel Clerk/ Front Office Assistant
3431.30,4221.10
4221.20 One year and three months
1. Front Office Assistant Three months Passed 10th class examination under 10+2 system of education or its equivalent.
7. Fruit and Vegetable Processor
775.90 Two years Preservation of Fruit and Vegetables One year Passed 10th class examination under 10+2 system of education with Science as one of the subjects or its equivalent.
8. House Keeper (Domestic)
5121.20 One year Domestic House Keeping Six months Passed 10th class examination under 10+2 system of education or its equivalent.
9. House Keeper (Hospital)
5121.35 One year and six months Hospital House Keeping One year Passed 10th class examination under 10+2 system of or its equivalent
10. House Keeper (Institution)
5121.10 One year Institution House Keeping Six months Passed 10th class examination under 10+2 system of education or its equivalent. 11 House Keeper (Corporate)
5121.10 One year Corporate House Keeping Six months Passed 10th class examination under 10+2 system of education or its equivalent.
12. Cabin/Room Attendant
5121.70 One year Cabin/Room Attendant Six months Passed 10th class exam. under 10+2 system of education or its equivalent.
13. Brew Master 7137.10 Six Months ---- ---- Passed 12th class examination under 10+2 system of education or its equivalent. Group No.16 – Textile Trades Group: 1 Weaver 755.50 Six months --- --- Passed 8th class under 10+2+3 system of education or two class below matriculation examination or its equivalent. Desirable- Passed 10th class examination under 10+2 system of education or its equivalent. 2 Doffer-cum- Piecer
752.65,752.40 Six months --- --- Passed 8th class or its equivalent.
3. Tenter (Drawing Speed/ Fly Frames)
752.10, 752.15,
752.20 Six months --- --- Passed 8th class or its equivalent. 4 Winder (Textile)
752.70 Six months --- --- Passed 8th class or its equivalent. 5 Knitter (Hosiery)
757.10, 757.15,
757.20, 757.25,
757.30 One year and six months --- --- Passed 10th class examination under 10+2 system of education or its equivalent. 6 Printing Textile 758.30, 758.32,
758.34 Six months --- --- Passed 8th class examination under 10+2 system of education. 7 Creel Boy-cum- Warper
753.40, 753.50 Six months --- --- Passed matriculation or 10th class examination under 10+2 system of education or its equivalent. Group No.17 – Mining Trades Group: 1 Sirdar (Colliery)
710.50 Three years --- --- Passed 10th class examination under 10+2 system of education with Science (Physics and Chemistry) as subject or its equivalent 2 Shotfirer/Blaste r (Mines)
714.10 Two years --- --- Passed 10th class examination under 10+2 system of education or its equivalent. 3 Mate (Mines) 710.40, 715.90 Three years --- --- Passed 10th class under 10+2 system of education with Science (Physics and Chemistry) as one of the subjects or its equivalent. Group No.18 – Chemical Trades Group: 1 Attendant Operator (Chemical Plant)
7414.40,7422.65
8142.10,8142.15
8142.40,8142.50
8142.90,8143.15
8151.15,8151.308
151.60,8152.1081
52.30,8152.60815
3.10,8153.408154 .20,8154.408155. 10,8159.348276.8 1,8159.648159.72 ,8159.768159.82,
8159.868276.10,8
276.208276.81,82
76.508276.70,827 Two years One year
1. Attendant Operator (Chemical Plant) --- One year --- Passed 10th class examination with Science and Mathematics under 10+2 system of education or its equivalent. Passed B.Sc. with Physics, Chemistry and Mathematic or Biology.
5.508275.40,8131 .608231.10,8231. 678231.20,8122.1 08142.20,8142.45
8143.10,8143.258
151.30,8151.1081
51.60,8152.15815
2.25,8152.908153 .30,8154.108154. 30,8159.888159.3 0,8159.428159.62 ,8159.688159.74,
8159.808159.84,8
159.888276.23,82
76.208276.40,827
6.607414.40,8275 .658272.10,8231. 658231.15,8231.3 0
2. Instrument Mechanic (Chemical Plant)
7311.30, 7311.65
7241.10 Two years One year
1. Instrument Mechanic (Chemical Plant) --- One year --- Passed 10th class examination with Science and Mathematics under 10+2 system of education or its equivalent. Passed B.Sc. with Physics and Chemistry.
3. Laboratory Assistant (Chemical Plant)
3111.30,3116.10
3116.30,3116.50
3117.30 Two years One year
1. Laboratory Assistant (Chemical Plant) -- One year -- Passed 10th class examination with Science and Mathematics under 10+2 system of education or its equivalent. Passed B.Sc. with Physics, Chemistry and Mathematic or Biology.
4. Fiber Reinforced Plastic Processor
8232.15
8232.25
8232.30
8232.70 One year and three months
1. Broad Based Basic Training in Plastic Processing Sector under Centre of Excellence Scheme
2. Plastic Processing Operator Three months Three months Passed 10th class examination under 10+2 system of education or its equivalent.
5. Plastic Processing Operator
8232.15,8232.18
8232.20,8232.65
8232.25,8232.30
8232.35,8232.40
8232.70,8232.45
8232.50,7222.50 Two years 1. Plastic Processing Operator One year Passed 10th class examination with Science and Mathematics under 10+2 system of education or its equivalent. Group No.19 – Cutting and Tailoring Trades Group:
1. Designer and Master Cutter
794.40, 794.60 One year and three months
1. Sewing Technology
2. Dress Making Three months Three months Passed 10th class examination under 10+2 system of education or its equivalent.
2. Tailor (Men) 791.30 791.40
791.50 One year and three months
1. Sewing Technology
2. Dress Making Three months Three months Passed 8th class examination from a recognised school.
3. Tailor (Women) 791.20 One year and three months
1. Sewing Technology
2. Dress Making Three months Three months Passed 8th class examination from a recognised school.
4. Tailor (General) 791.10 791.90 One year and three months
1. Sewing Technology
2. Dress Making Three months Three months Passed 8th class examination from a recognised school.
5. Dress Maker 781.20 One year and three months
1. Dress Making Three months Passed 8th class examination from a recognised school.”;
6. Embroiderer (Surface Ornamentation Techniques)
795.40 One year and three months
1. Surface Ornamentation Techniques (Embroidery)
2. Embroidery and Needle Work Three months Three months Passed 8th class examination from a recognised school.
7. Cutting and Sewing Machine Operator
7433.10
7435.30
7435.40 One year and three months
3. Sewing Technology
4. Dress Making Three months Three months Passed 8th class examination from a recognised school.
8. Assistant Fashion Designer
7435.10 One year and three months
1. Fashion Design and Technology Three months Passed 12th class examination under 10+2 system of education or its equivalent.
9. Computerized Embroidery
8263.45 One year and three months
1. Computer Aided Embroidery and Three months Passed 10th class examination under 10+2 system of Machine Operator and Digitizer Designing education or its equivalent. Group No.20 – Agriculture Trades Group:
1. Mechanic (Agriculture Machinery)
7231.10 Two years 1. Mechanic (Agriculture Machinery) One year Passed 10th class examination under 10+2 system of education or its equivalent.
2. Horticulture Assistant
7231.10 Two years 1. Horticulture Assistant One year Passed 10th class examination under 10+2 system or its equivalent.
3. Stockman (Dairy)
082.10, 082.20 Two years --- --- Passed 10th class examination under 10+2 system of education with Science or its equivalent.
4. Attendant Operator (Dairy)
776.10, 776.20
776.30, 776.40
776.50, 776.60
776.70, 776.90 Three years --- --- Passed 10th class Examination under 10+2 system of education with Science and Mathematics or its equivalent.
5. Pump Operator Cum Mechanic
845.57 Two years 1. Pump Mechanic
2. Pump Operator Cum Mechanic One year One year Passed 10th class under 10+2 system of education with Science or its equivalent.
6. Florist and Landscaper
2213.20 One year Florist and Landscaping Six months Passed 10th class examination under 10+2 system of or its equivalent Group No. 21 – Leather Crafts Trades Group
1. Sports Goods Maker (Leather)
809.90 Two years Sports Goods Maker (Leather) One year Passed 10th class examination under 10+2 system of education or its equivalent.
2. Leather Goods Maker
809.10, 809.20
809.30, 809.40 Two years Manufacturer of suitcase and other leather Goods One year Passed 8th class examination under 10+2 system or 2 class below Matriculation examination or its equivalent.
3. Footwear Maker
801.10 Two years Manufacture of Footwear One year Passed in 8th examination under 10+2+3 or 2 class below Matriculation examination or its equivalent.
4. Finished Leather Maker
761.00 Two years --- --- Passed in 8th examination under 10+2+3 or 2 class below Matriculation examination or its equivalent.
5. Maintenance Mechanic for Leather Machinery
845.50 Three years Fitter One year Passed 10th under 10+2 system (Physics and Chemistry) and Math as subjects or its equivalent.
6. Upholsterer 796.10 Two years 1. Upholsterer
2. Leather Goods Maker One year One year Pass in 8th class examination under 10+2 system of education or 2 class below Matriculation examination or its equivalent. Group No. 22- Ship Building Trades Group
1. Shipwright (Steel)
816.20 Three years Fitter One year Passed 10th class under 10+2 system of education or equivalent. Desirable – Passed SSLC with Science (Physics and Chemistry) and Math or its equivalent or passed 10th class examination under 10+2 system with Science & Mathematics as subjects.
2. Pipe Fitter 7136.10
7136.30 Two years 1. Plumber One year Passed 10th class under 10+2 system of education or its equivalent.
3. Rigger 7215.10 Two years --- --- Passed 8th class examination from a recognised school.
4. Gas Cutter 872.40 Two years Welder (Gas and Electric) One year Pass the 8th examination under 10+2 system of education or its equivalent. Desirable – Passed 8th class examination with Science and Math as subject under 10+2+3 system of education or two standard below matriculation.
5. Shipwright (Wood)
7124.45
7124.70 Two years 1. Carpenter One year Passed 10th under examination under 10+2 system of education or its equivalent. Group No. 23 – Electronics Trades Group
1. Mechanic Radio and Radar Aircraft
7242.10,7243.20
7243.10,7243.75
7243.80 Two years 1. Electronics Mechanic
2. Mechanic Consumer Electronic Appliances
3. Technician Power Electronics System
4. Mechanic Industrial Electronics One year One year One year One year Passed 10th class examination under 10+2 system of education or its equivalent.
2. Electronics Mechanic
7242.10,7242.90
7243.10,7243.40
8283.90 Two years 1. Electronics Mechanic One year Passed 10th class under 10+2 system of education or its equivalent.
3. Mechanic Television (Video)
854.20 Three years 1. Electronics Mechanic
2. Mechanic (Radio and T.V.) Two years Two years Passed Matriculation under 10+2 system with Mathematics and Science or its equivalent.
4. Mechanic – cum-Operator Electronics Communication System
7243.10
7243.20
7243.75
7243.80
7244.10
7244.20 Two years 1. Electronics Mechanic
2. Mechanic Consumer Electronic Appliances
3. Technician Power Electronics System
4. Broad Based Basic Training in Electronics Sector under Centre of Excellence Scheme and Advanced module of Centre of Excellence in Communication System One year One year One year One year Passed 10th class examination under 10+2 system of education or its equivalent.
5. Mechanic Communication Equipment Maintenance
7244.20 Two years 1. Electronics Mechanic
2. Mechanic Consumer Electronic Appliances
3. Technician Power Electronics System
4. Mechanic Industrial Electronics
5. Broad Based Basic Training in Electronics Sector under Centre of Excellence Scheme and Advanced module of One year One year One year One year One year Passed 10th class examination under 10+2 system of education or its equivalent. Centre of Excellence in Communication System
6. Mechanic Radio and T.V.
7243.70 Three years Mechanic Radio and T.V. Two year Passed 10th class examination under 10+2 system of education with Science as one of the subject or its equivalent. Group No. 24 – Photography Trade Group
1. Photographer 173.10 Two years Photographer One year Passed 10th class under 10+2 system with Science( Physics and Chemistry) as one of the subjects or its equivalent.
2. Digital Photographer
3131.25 One year and six months Digital Photographer One year Passed 10th class examination under 10+2 system of education or its equivalent. Group No. 25 – Iron and Steel Trades Group
1. Brick Layer (Refractory)
7122.30 Two years 1. Mason (Building Constructor) One year Passed 8th class examination under 10+2 system of education or its equivalent.
2. Furnace Operator (Steel Industry)
3135.1100 One year and three months --- --- Passed 10th class examination under 10+2 system of education or its equivalent.
3. Steel Melting Hand
723.15, 723.20,
723.30 Two years --- --- Passed 10th under 10+2 system with Science( Physics and Chemistry) & Mathematics or its equivalent.
4. Crane Operator Overhead (Steel Industry)
8343.0700 One year and three months --- --- Passed 10th class examination under 10+2 system of education or its equivalent.
5. Operator (Steel Plant)
8121.15,8121.55
8121.60,8122.50
8122.52,8159.10
8159.12,8161.45 Two years --- --- Passed 10th class examination under 10+2 system of education with Science and Mathematics or its equivalent.
6. Electrician (Steel Plant)
7411.0100
7412.0801 Two years Electrician One year Passed 10th class examination under 10+2 system of education or its equivalent.
7. Electronics Mechanic (Steel Plant)
7421.0100
7421.0300
7421.9900 Two years Electronics Mechanic One year Passed 10th class examination under 10+2 system of education or its equivalent.
8. Fitter (Steel Plant)
7126.0301
7126.9900
7224.0102 Two years Fitter One year Passed 10th class examination under 10+2 system of education or its equivalent.
9. Instrument Mechanic (Steel Plant)
7311.0101
7311.1000 Two years Instrument Mechanic One year Passed 10th class examination under 10+2 system of education or its equivalent. 10 Operator Coal Handling Equipment
8112.0600 One year and three months --- --- Passed 10th class examination under 10+2 system of education or its equivalent. 11 Operator Locomotive and Rail Cranes in Steel Plant
8162.50, 8333.30 One year and three months --- --- Passed 10th class examination under 10+2 system of education or its equivalent. 12 Operator Material Handling at Raw Material Handling Plant
8121.90 One year and three months --- --- Passed 8th class examination from a recognized school or its equivalent. 13 Operator Coke Ovens Battery Equipments
8159.16 One year and three months --- --- Passed 10th class examination under 10+2 system of education or its equivalent. 14 Operator Blast Furnace Iron Making
8121.15
8223.60 One year and three months --- --- Passed 10th class examination under 10+2 system of Equipments education or its equivalent. 15 Operator Steel Melting Equipments
8121.35 One year and three months --- --- Passed 10th class examination under 10+2 system of education or its equivalent. 16 Operator Sinter Plant Equipments
8121.90 One year and three months --- --- Passed 10th class examination under 10+2 system of education or its equivalent. 17 Operator Rolling Mills Equipment (Long Products)
8122.20 One year and three months --- --- Passed 10th class examination under 10+2 system of education or its equivalent. Group No. 26 – Beautician Trades Group
1. Beautician 560.30 One year and three months --- --- Passed 10th class examination under 10+2 system of education or its equivalent.
2. Hair Cutter/ Dresser
560.20 One year and three months --- --- Passed 8th class examination from a recognised school or its equivalent.
3. Health and Slimming
089.50 One year and three months --- --- Passed 10th class examination under Assistant 10+2 system of education or its equivalent.
4. Hair and Skin Carer
560.30 One year and three months
1. Basic Cosmetology Three months Passed 10th class examination under 10+2 system of education or its equivalent. Group No. 27 – Glass and Ceramic Trades Group
1. Ceramic Moulder
7321.25 One year and three months --- --- Passed 8th class examination from a recognised school.
2. Ceramic Caster 7321.15 One year and three months --- --- Passed 8th class examination from a recognised school.”;
3. Ceramic Kiln Operator
893.30 Two years --- --- Passed 8th class of 10+2 system of education or 2 standard below or its equivalent.
4. Ceramic Press Operator
892.60 Two years --- --- Passed 8th class of 10+2 system of education or 2 standard below or its equivalent. 5 Ceramic Decorator
895.30 Two years --- --- Passed 8th class of 10+2 system of education or 2 standard below or its equivalent.
6. Moulder (Refractory)
7321.40 One year and three months --- --- Passed 8th class examination from a recognised school.
7. Enamel Glazer 895.50 Two years --- --- Passed 10th class examination under 10+2 system with Science as subject or its equivalent.
8. Insulator Maker/Machine Operator (Ceramic)
8139.60
8139.30 Two years 1. Refractory Technician One year Passed 10th class examination under 10+2 system of education with science or its equivalent.
9. Optical Worker 891.48 Three years 1. Machinist
2. Millwright Maintenance Mechanic
3. Turner
4. Fitter
5. Machinist(Grinder) One year One year One year One year One year Passed 10th class examination under 10+2 system of education or its equivalent. Group No. 28 – Painting Trades Group
1. Painter (General)
7142.10 Two years 1. Painter (General) One year Passed 8th class examination from a recognised school.
2. Painter (Marine)
931.20 Two years Painter (General) One year Passed 8th class examination under 10+2 system preferably with Math and Science or two standard below. Group No. 29 – Computer Trades Group
1. Desk Top Publishing Operator
3512.0200 One year and three months
1. Desk Top Publishing Operator Three months Passed 10th class examination under 10+2 system of education or its equivalent.
2. Programming and Systems Administration Assistant
103.70 103.80 One year --- --- National Trade Certificate issued by National Council for Vocational Training in “Computer Operator and Programming Assistant”
3. Information and Communication Technology System Maintenance
3114.9900 Two years 1. Information and Communication Technology System Maintenance
2. Information Technology and Electronic System Maintenance
3. Broad Based Basic Training in Information Technology Sector under Centre of Excellence Scheme and Advanced module of Centre of Excellence Scheme in Repair and Maintenance of Hardware of Computer and Peripherals. One year One year One year Passed 10th class examination under 10+2 system of education
4. Computer Operator and Programming Assistant
4131.0600
3514.0300 One year and three months
1. Computer Operator and Programming Assistant Three months Passed 10th class examination under 10+2 system of education or its equivalent. Group No. 30 – Hi-Tech Trades Group
1. Advanced Attendant Operator (Process)
730.20, 740.10,
740.90, 900.10,
740.20, 890.20,
770.90, 730.90,
770.40 One year & six months --- --- Passed B.Sc. with Physics and Chemistry as compulsory and Mathematics as desirable subject.
2. Operator Cum Mechanic Pollution Control Equipment.
039.10,
039.90 Two years --- --- Passed Higher Secondary Examination with Physics, Chemistry and Biology under 10+2 system of Education or its equivalent.
3. Mechanic Medical Equipment for Hospitals and Occupational Health Centre.
086.10, 088.10,
089.90, 090.90 Two years --- --- Passed Higher Secondary examination under 10+2 system of education with Physics, Chemistry and Biology. Group No. 31 – Multi Skill Trades Group 1 Mechanic Industrial Electronics
7243.10 Two years 1. Electronics Mechanic
2. Mechanic Consumer Electronic Appliances
3. Technician Power Electronics System One year One year One year Passed 10th class examination under 10+2 system of education or its equivalent.
4. Mechanic Industrial Electronics One year 2 Mechanic Advanced Machine Tool Maintenance.
845.10, 845.13
845.16, 845.20
845.23, 845.26
845.30, 845.35
845.37, 845.40
845.43, 845.47
845.50, 845.53
845.55, 845.57
845.60, 845.63
845.65, 845.70 Three years - - Passed 10+2 with Physics, Chemistry and Mathematics
3. Operator Advanced Machine Tool
8211.108211.15
8211.22
8211.28
8211.30
8211.32
8211.36
8211.38 Two years 1. Operator Advanced Machine Tool
2. Machinist
3. Turner One year One year One year Passed 10th class examination with Science and Mathematics under 10+2 system of education or its equivalent.
4. Power Electrician
7137.10
7241.107241.208
161.45
8161.50 Two years 1. Electrician One year Passed 10th class examination with Science under 10+2 system of education or its equivalent.
5. Operator-cum- Mechanic Power Plant
8161.45 Two years --- --- Passed 10th class examination with Science and Mathematics under 10+2 system of education or its equivalent.
6. Mechanic Medical Electronics
7243.30
3133.20
3133.90 Two years 1. Electronics Mechanic
2. Mechanic Consumer One year One year Passed 10th class examination under 10+2 system of Electronic Appliances
3. Technician Power Electronics System
4. Mechanic Medical Electronics One year One year education or its equivalent.
7. Mechanic Consumer Electronics Appliances
7242.10
7242.90
7243.10
7243.40
7243.45
7243.50
7233.58 Two years 1. Electronics Mechanic
2. Mechanic Consumer Electronic Appliances
3. Technician Power Electronics Systems One year One year One year Passed 10th class examination under 10+2 system of education or its equivalent.
8. Mechanic Mechatronics
7233.38
7233.46 Two years 1. Mechanic Mechatronics
2. Mechanic Machine Tool Maintenance One year One year Passed 10th class examination with Science and Mathematics under 10+2 system of education or its equivalent. Group No. 32 – Information Sector Trades Group
1. Jewel Smith 7318.30
7313.90 One year and three months ---- ---- Passed 8th class examination from a recognised school.
2. Gardener (Mali) 652.10 One year ---- ---- Passed 8th class examination from recognized school or its equivalent.
3. Customer Care Associate
4221.90
4221.30 One year and three months --- --- Passed 10th class examination under 10+2 system of education or its equivalent.
4. Assistant Beautician
560.30 One year and three months --- --- Passed 8th class examination from a recognised school.
5. Battery Repairer
859.65 One year and three months ---- ---- Passed 10th class examination under 10+2 system of education or its equivalent.
6. Tyre Repairer 903.60 Six months ---- ---- Passed 8th class examination
7. Screen Printing 929.50 Six months ---- ---- Passed 10th class examination under 10+2 system of education or its equivalent.
8. Beautician Assistant
560.30 Six months ---- ---- Passed 10th class examination under 10+2 system of education or its equivalent.
9. Medical Laboratory Technician (Pathology)
3221.10 One year and three months ---- ---- Passed 12th class examination under 10+2 system of education with physics, chemistry and biology
10. Medical Laboratory Technician (Radiology)
3133.10 One year and three months ---- ---- Passed 12th class examination under 10+2 system of education with physics, chemistry and biology.
11. Medical Laboratory Technician (Cardiology)
3212.0701 One year and three months ---- ---- Passed 12th class examination under 10+2 system of education with physics, chemistry and biology.
12. Pruner Tea Gardens
640.10 Six months ---- ---- Passed 8th class
13. Cable Television Operator
861.10 Six months ---- ---- Passed 10th class examination under 10+2 system of education or its equivalent.
14. Medical Laboratory Technician (Physiotherapy)
3212.0701
3255.0101 One year and three months
1. Physiotherapy Technician Three months Passed 12th class examination under 10+2 system of education with physics, chemistry and biology. Group No. 33 – Retail Sector Trades Group
1. Sales Person (Retail)
5220.35
5220.60 One year and three months --- --- Passed 10th class examination under 10+2 system of education or its equivalent..
2. Senior Sales Person (Retail)
5220.15, 5220.35 One year Sales Person (Retail) Six months Passed 10th class examination under 10+2 system of education or its equivalent. Group No. 34 – Glassware / Metal ware Trades Group
1. Lacquering and Powder Coating Operator
7422.60
7422.62 One year --- --- Passed 10th class examination under 10+2 system of education or its equivalent.
2. Wood Handicrafts Worker
7422.42
7422.48
7423.20 One year --- --- Passed 10th class examination under 10+2 system of education or its equivalent.
3. Glass Former and Processor
7142.60
7322.38
7322.40
7322.45
7323.10 One year --- --- Passed 8th class examination from recognized school or its equivalent. Group No. 35 – Centre of Excellence Trades Group
1. Mechanic Automobile (Advanced Petrol Engine)
7233.22 Two years 1. Broad Based Basic Training in Automobile Sector under Centre of Excellence Scheme and Advanced module of Centre of Excellence Scheme in Servicing and Overhauling of Automobiles (Petrol). One year Passed 10th class examination under 10+2 system of education or its equivalent.
2. Mechanic Automobile (Advanced Diesel Engine)
7233.24 Two years 1. Broad Based Basic Training in Automobile Sector under Centre of Excellence Scheme and Advanced module of Centre of Excellence Scheme in Servicing and One year Passed 10th class examination under 10+2 system of education or its equivalent. Overhauling of Automobiles (Diesel).
3. Mechanic Auto Electronics
7242.10 Two years Broad Based Basic Training in Automobile Sector under Centre of Excellence Scheme and Advanced module of Centre of Excellence Scheme in Auto Electrical, Auto Electronics and Airconditioning in Automobiles. One year and six months Passed 10th class examination under 10+2 system of education or its equivalent.
4. Mechanic (Denting, Painting and Welding)
7142.20
7213.30 Two Years Broad Based Basic Training in Automobile Sector under Centre of Excellence Scheme and Advanced module of Centre of Excellence Scheme in Denting(Painting and Welding). One year and six months Passed 10th class examination under 10+2 system of education or its equivalent.
5. TIG/MIG Welder
7212.10
7212.20 One year and three months
1. Broad Based Basic Training in Fabrication (Fitting & Welding) Sector under Centre of Excellence Scheme and Advanced module of Centre of Excellence Scheme in TIG/MIG Welding.
2. Welder Three months Three months Passed 10th class examination under 10+2 system of education or its equivalent.
6. Structural Welder
7212.10
7212.20
7212.30 One year and three months
1. Broad Based Basic Training in Fabrication (Fitting & Welding) Sector under Centre of Excellence Scheme and Advanced module of Centre of Excellence Three months Passed 10th class examination under 10+2 system of education or its equivalent. Scheme in Structural Welding.
2. Welder Three months
7. Welder (Pipe and Pressure Vessels)
7212.10
7212.20
7212.30 One year and three months
1. Broad Based Basic Training in Fabrication (Fitting and Welding) Sector under Centre of Excellence Scheme and Advanced module of Centre of Excellence Scheme in Pressure Vessels and Pipe Welding.
2. Welder Three months Three months Passed 10th class examination under 10+2 system of education or its equivalent.
8. Chemical Laboratory Assistant
3111.30 Two years 1. Broad Based Basic Training in Chemical Sector under Centre of Excellence Scheme and Advanced module of Centre of Excellence Scheme in Laboratory Assistant
2. Laboratory Assistant (Chemical Plant) One year One year Passed 10th class examination under 10+2 system of education or its equivalent.
9. Advance Mechanic (Instruments)
7311.10
7311.30
7241.10 Two years Broad Based Basic Training in Chemical Sector under Centre of Excellence Scheme and Advanced module of Centre of Excellence Scheme in Instruments Mechanic. One year and six months Passed 10th class examination under 10+2 system of education or its equivalent.
10. CAD-CAM Operator cum Programmer
3121.20 One year and three months
1. Broad Based Basic Training in Production and Manufacturing Sector under Centre of Excellence Scheme and Advanced module of Centre of Excellence Scheme in CAD/ CAM.
2. Draughtsman (Mechanical) Three months Three months Passed 10th class examination under 10+2 system of education or its equivalent.
11. Advance Welder
7212.10
7212.20
7212.30
7212.65 One year and three months
1. Broad Based Basic Training in Production and Manufacturing Sector under Centre of Excellence Scheme and Advanced module of Centre of Excellence Scheme in Advance Welding.
2. Welder Three months Three months Passed 10th class examination under 10+2 system of education or its equivalent.
12. Jigs and Fixtures Maker
7222.30 Two years Broad Based Basic Training in Production and Manufacturing Sector under Centre of Excellence Scheme and Advanced module of Centre of Excellence Scheme in Manufacturing of Jigs and Fixtures. One year and six months Passed 10th class examination under 10+2 system of education or its equivalent.
13. Quality Assurance Assistant
3152.90 Two years Broad Based Basic Training in Production and Manufacturing Sector under Centre of Excellence Scheme One year and six months Passed 10th class examination under 10+2 system of education or its and Advanced module of Centre of Excellence Scheme in Quality Engineering. equivalent.
14. CNC Programmer cum Operator
3121.20 One year and three months
1. Broad Based Basic Training in Production and Manufacturing Sector under Centre of Excellence Scheme and Advanced module of Centre of Excellence Scheme in CNC Machining.
2. Machinist
3. Turner Three months Three months Three months Passed 10th class examination under 10+2 system of education or its equivalent.
15. Operator PLC System
8211.90 Two years Broad Based Basic Training in Production and Manufacturing Sector under Centre of Excellence Scheme and Advanced module of Centre of Excellence Scheme in PLC and Automation. One year and six months Passed 10th class examination under 10+2 system of education or its equivalent.
16. Mechanic (Electrical Domestic Appliances)
7233.58 Two years 1. Broad Based Basic Training in Electrical Sector under Centre of Excellence Scheme and Advanced module of Centre of Excellence Scheme in Repair and Maintenance of Domestic Appliances.
2. Electrician One year One year Passed 10th class examination under 10+2 system of education or its equivalent.
17. Mechanic (HT, LT Equipments and Cable Jointing)
7241.90
7245.90 Two years 1. Broad Based Basic Training in Electrical Sector under Centre of Excellence Scheme and Advanced module of Centre of Excellence Scheme in Operation and Maintenance of equipments used in HT, LT Substation and Cable Jointing.
2. Electrician One year One year Passed 10th class examination under 10+2 system of education or its equivalent.
18. Mechanic (Electrical Power Drives)
7241.20
7242.20 Two years 1. Broad Based Basic Training in Electrical Sector under Centre of Excellence Scheme and Advanced module of Centre of Excellence Scheme in Repair and Maintenance of Electrical machines and Power Supply.
2. Electrician One year One year Passed 10th class examination under 10+2 system of education or its equivalent.
19. Mechanic (Embedded Systems and PLC)
8211.90 Two years 1. Broad Based Basic Training in Electronics Sector under Centre of Excellence Scheme and Advanced module of Centre of Excellence Scheme in Embedded Systems and PLC. One year Passed 10th class examination under 10+2 system of education or its equivalent.
20. Mechanic Power Electronics (Inverters, UPS and Maintenance of Drives)
7241.10
7242.10 Two years 1. Broad Based Basic Training in Electronics Sector under Centre of Excellence Scheme and Advanced module of Centre of Excellence Scheme in Inverters, UPS, Voltage Stabilizer and Industrial Drives.
2. Electronics Mechanic
3. Mechanic Consumer Electronic Appliances
4. Technician Power Electronics Systems
5. Mechanic Industrial Electronics One year One year One year One year One year Passed 10th class examination under 10+2 system of education or its equivalent.
21. Mechanic (DTH and other Communication System)
7243.10
7244.20 Two years Broad Based Basic Training in Electronics Sector under Centre of Excellence Scheme and Advanced module of Centre of Excellence Scheme in Communication System. One year and six months Passed 10th class examination under 10+2 system of education or its equivalent.
22. Mechanic (Domestic, Commercial Refrigeration and Air Conditioning Machines)
7233.50 Two years 1. Broad Based Basic Training in Refrigeration and Air-conditioning Sector under Centre of Excellence Scheme and Advanced module of Centre of Excellence Scheme in Domestic, One year Passed 10th class examination under 10+2 system of education or its equivalent. Commercial Refrigeration and Air Conditioning.
2. Mechanic (Refrigeration and Air Conditioning) One year
23. Mechanic (Central Air conditioning Plant, Industrial cooling and Package Air conditioning)
8169.30 Two years 1. Broad Based Basic Training in Refrigeration and Air-conditioning Sector under Centre of Excellence Scheme and Advanced module of Centre of Excellence Scheme in Central Air conditioning Plant, Industrial cooling and Package Air-conditioning. One year Passed 10th class examination under 10+2 system of education or its equivalent.
24. Mechanic (Cold storage, Ice plant and Ice candy plant)
7413.50
8169.30 Two years Broad Based Basic Training in Refrigeration and Airconditioning Sector under Centre of Excellence Scheme and Advanced module of Centre of Excellence Scheme in Cold storage, Ice plant and Ice candy plant. One year and six months Passed 10th class examination under 10+2 system of education or its equivalent.
25. Computer Aided Pattern Maker
7222.80
7422.38
7434.20
7435.10
7442.16 Two years Broad Based Basic Training in Apparel Sector under Centre of Excellence Scheme and Advanced module of Centre of Excellence Scheme in Computer Aided and Pattern Making. One year and six months Passed 10th class examination under 10+2 system of education or its equivalent.
26. Fashion Designing
3471.40 Two years Broad Based Basic Training in Apparel Sector under Centre of Excellence Scheme One year and six months Passed 10th class examination under 10+2 system of Assistant and Advanced module of Centre of Excellence Scheme in Fashion Designing. education or its equivalent.
27. Shirts and Trousers Maker
7433.25
7433.30 One year and three months
1. Broad Based Basic Training in Apparel Sector under Centre of Excellence Scheme and Advanced module of Centre of Excellence Scheme in Shirts and Trousers.
2. Sewing Technology
3. Dress Making Three months Three months Three months Passed 10th class examination under 10+2 system of education or its equivalent. “28. Mechanic (Nonconventional Power Generation, Battery and Inverter)
8282.10 Two years 1. Broad Based Basic Training in Electrical Sector under Centre of Excellence Scheme and Advanced module of Centre of Excellence Scheme in Nonconventional Power Generation, Battery and Inverter.
2. Electrician One year One year Passed 10th class examination under 10+2 system of education or its equivalent.
29. Mechanic Electrical Instruments
7241.10 Two years 1. Broad Based Basic Training in Electrical Sector under Centre of Excellence Scheme and Advanced module of Centre of Excellence Scheme in Repair and One year Passed 10th class examination under 10+2 system of education or its equivalent. Maintenance of instruments used in Electrical Engineering.
2. Electrician One year
30. Extrusion Machine Operator (Plastic)
8232.20 Two years 1. Broad Based Basic Training in Plastic Processing Sector under Centre of Excellence Scheme and Advanced module of Centre of Excellence Scheme in Extrusion Process.
2. Plastic Processing Operator One year One year Passed 10th class examination under 10+2 system of education or its equivalent.
31. Injection Moulding Machine Operator
8232.25 Two years 1. Broad Based Basic Training in Plastic Processing Sector under Centre of Excellence Scheme and Advanced module of Centre of Excellence Scheme in Injection Moulding Process.
2. Plastic Processing Operator One year One year Passed 10th class examination under 10+2 system of education or its equivalent.
32. Blow Moulding Machine Operator
8232.35 Two years 1. Broad Based Basic Training in Plastic Processing Sector under Centre of Excellence Scheme and Advanced One year Passed 10th class examination under 10+2 system of education or its equivalent. module of Centre of Excellence Scheme in Blow Moulding Process.
2. Plastic Processing Operator One year
33. House Keeper (Hotel)
5121.10 Two years Broad Based Basic Training in Hospitality Sector under Centre of Excellence Scheme and Advanced module of Centre of Excellence Scheme in Accommodation Operation/ House Keeping. One year and six months Passed 10th class examination under 10+2 system of education or its equivalent.
34. Assistant Front Office Manager
5121.25 Two years Broad Based Basic Training in Hospitality Sector under Centre of Excellence Scheme and Advanced module of Centre of Excellence Scheme in Front Office Management. One year and six months Passed 10th class examination under 10+2 system of education or its equivalent.
35. Apprentice Food Production (Cookery)
5122.20 Two years Broad Based Basic Training in Hospitality Sector under Centre of Excellence Scheme and Advanced module of Centre of Excellence Scheme in Food Production (Cookery). One year and six months Passed 10th class examination under 10+2 system of education or its equivalent.
36. Apprentice Food and Beverage Service (Stewardship)
5123.20 Two years Broad Based Basic Training in Hospitality Sector under Centre of Excellence Scheme and Advanced module of Centre of Excellence Scheme in Food and Beverage Service (Stewardship). One year and six months Passed 10th class examination under 10+2 system of education or its equivalent.
37. Computer and Peripherals Hardware Repair and Maintenance Mechanic
2523.0200
7422.2001 One year and three months
1. Broad Based Basic Training in Information Technology Sector under Centre of Excellence Scheme and Advanced module of Centre of Excellence Scheme in Repair and Maintenance of Hardware of Computer and Peripherals. Three months Passed 10th class examination under 10+2 system of education or its equivalent.
38. Computer Networking Technician
2523.9900
3513.9900 One year and three months
1. Broad Based Basic Training in Information Technology Sector under Centre of Excellence Scheme and Advanced module of Centre of Excellence Scheme in Computer Networking. Three months Passed 10th class examination under 10+2 system of education or its equivalent.
39. Multimedia and Web Page Designer
2166.0201
2513.0101
2166.0300 One year and three months
1. Broad Based Basic Training in Information Technology Sector under Centre of Excellence Scheme and Advanced module of Centre of Excellence Scheme in Multimedia and Web Page Designing. Three months Passed 10th class examination under 10+2 system of education or its equivalent.
40. Process Plant Operator
8152.10 Two years Broad Based Basic Training in Process Plant Maintenance Sector under Centre of Excellence Scheme and Advanced module of Centre of Excellence Scheme in One year and six months Passed 10th class examination under 10+2 system of education or its equivalent. Operator Chemical Plant.
41. Utility Operator 3131.0300
8182.0200 One year and three months
1. Broad Based Basic Training in Process Plant Maintenance Sector under Centre of Excellence Scheme and Advanced module of Centre of Excellence Scheme in Operation and Maintenance of Boiler and Steam Turbine. Three months Passed 10th class examination under 10+2 system of education or its equivalent.
42. Maintenance Mechanic
8159.79 Two years Broad Based Basic Training in Process Plant Maintenance Sector under Centre of Excellence Scheme and Advanced module of Centre of Excellence Scheme in Mechanical Maintenance of Process Plant. One year and six months Passed 10th class examination under 10+2 system of education or its equivalent.
43. Mechanic (Electrical Maintenance of Process Plant)
7241.20 Two years 1. Broad Based Basic Training in Process Plant Maintenance Sector under Centre of Excellence Scheme and Advanced module of Centre of Excellence Scheme in Electrical Maintenance of Process Plant.
2. Electrician One year One year Passed 10th class examination under 10+2 system of education or its equivalent.
44. Instrument Controller
7311.0101
7311.1001 Two years 1. Broad Based Basic Training in Process Plant Maintenance Sector under Centre of One year Passed 10th class examination under 10+2 system of education or its Excellence Scheme and Advanced module of Centre of Excellence Scheme in Electronic and Instrument Maintenance of Process Plant.
2. Instrument Mechanic One year equivalent.
45. Technician Fabricator
7212.30 Two years Broad Based Basic Training in Process Plant Maintenance Sector under Centre of Excellence Scheme and Advanced module of Centre of Excellence Scheme in Fabrication and Designing of Steel Structure. One year and six months Passed 10th class examination under 10+2 system of education or its equivalent. 46 Technician Television and Audio System
7243.10
7243.40
7243.45
7243.50
7243.70 Two years 1. Broad Based Basic Training in Electronics Sector under Centre of Excellence Scheme and anyone Advanced module in Centre of Excellence Scheme of Electronic Sector
2. Electronics Mechanic
3. Mechanic Consumer Electronic Appliances One year One year One year Passed 10th class examination under 10+2 system of education or its equivalent.
47. Mechanic Repair and Maintenance of Electronics Test Equipment
7243.10 Two years 1. Broad Based Basic Training in Electronics Sector under Centre of Excellence Scheme and Advanced module of One year Passed 10th class examination under 10+2 system of education or its equivalent. Centre of Excellence Scheme in Repair and Maintenance of Electronics Test Equipment
2. Electronics Mechanic
3. Mechanic Consumer Electronic Appliances
4. Technician Power Electronics Systems
5. Mechanic Industrial Electronics One year One year One year One year
48. Mechanic Automobile Electronics
7231.10 Two years Broad Based Basic Training in Electronics Sector under Centre of Excellence Scheme and Advanced module of Centre of Excellence Scheme in Automobile Electronics One year and six months Passed 10th class examination under 10+2 system of education or its equivalent.
49. Mechanic Mechanical Maintenance (Industrial Automation)
7233.38 Two years Broad Based Basic Training in Industrial Automation Sector under Centre of Excellence Scheme and Advanced module of Centre of Excellence Scheme in Mechanical Maintenance for Automation One year and six months Passed 10th class examination under 10+2 system of education or its equivalent.
50. Mechanic Electrical Maintenance (Industrial
7241.70 Two years Broad Based Basic Training in Industrial Automation Sector under Centre of Excellence Scheme and One year and six months Passed 10th class examination under 10+2 system of education or its Automation) Advanced module of Centre of Excellence Scheme in Electrical Maintenance for Automation equivalent.
51. PLC Operator 7233.38 Two years 1. Broad Based Basic Training in Industrial Automation Sector under Centre of Excellence Scheme and Advanced module of Centre of Excellence Scheme in Automation and PLC.
2. Broad Based Basic Training in Production and Manufacturing Sector under Centre of Excellence Scheme and Advanced module of Centre of Excellence Scheme in PLC Automation. One year One year Passed 10th class examination under 10+2 system of education or its equivalent.”; Group No. 36 – Hospitality Trades Group
1. Tourist Guide 5113.20 One year Tourist Guide Six months Passed 10th class examination under 10+2 system of or its equivalent
2. Old Age Care Taker
5131.20 One year Old Age Care Six months Pass 8th class examination from recognized school or its equivalent.
3. Creche Management Assistant
5121.40 One year Creche Management Six months Passed 10th class examination under 10+2 system of education or its equivalent.
4. Pre or Preparatory School Management (Assistant)
3222.10 One year Pre or Preparatory School Management (Assistant) Six months Passed 10th class examination under 10+2 system of education or its equivalent.
5. Insurance Agent 3412.10 One year Insurance Agent Six months Passed 10th class examination under 10+2 system of or its equivalent Group No. 37 – Office Management Trades Group
1. Secretarial Assistant
4115.10 One year and three months
1. Stenography (English)
2. Secretarial Practice Three months Three months Passed 10th class examination under 10+2 system of or its equivalent
2. Stenographer (English)
4111.10 One year and three months
1. Stenography (English) Three months Passed 10th class examination under 10+2 system of or its equivalent
3. Stenographer (Hindi)
4111.10(H) One year and three months
2. Stenography (Hindi) Three months Passed 10th class examination under 10+2 system of education with Hindi as compulsory subject or its equivalent. Group No. 38 – Health Allied Trades Group
1. Dental Laboratory Technician
7311.80 Three years Dental Laboratory Technician Two years Passed 10th class examination under 10+2 system of education or its equivalent.
2. Heath Sanitary Inspector
3257.0100 One year and three months
1. Heath Sanitary Inspector Three months Passed 10th class examination under 10+2 system of education or its equivalent.
3. Hospital Waste Management Assistant
5151.9900 One year and three months
1. Hospital Waste Management Assistant Three months Passed 10th class examination under 10+2 system of education or its equivalent. Group No. 39 – library and Information Science Trades Group
1. Library Assistant
4141.10 One year Library and Information Science Six months Passed 10th class examination under 10+2 system of or its equivalent
SCHEDULE-IA (See rule 3(2) Category of Apprentices Minimum Educational Qualification
(1) (2) Graduate apprentices
(a) A degree in engineering or technology granted by a statutory University.
(b) A degree in engineering or technology granted by an institution empowered to grant such degrees by an Act of Parliament.
(c) Graduate examination of professional bodies recognised by the Central Government as equivalent to a degree.
(d) A sandwich course student who is undergoing training in order that he may hold a degree in engineering or technology as mentioned at (a) and
(b) above Technician Apprentices
(a) A diploma in engineering or Technology granted by a State Council or Board of Technical Educational established by a State Government.
(b) A diploma in engineering or technology granted by a University.
(c) A diploma in engineering or technology granted by an Institute recognised by the State Government or Central Government as equivalent to (a) and (b) above.
(d) A sandwich course student who is undergoing training in order that he may hold a diploma mentioned in (a), (b) & (c) above Technician (Vocational) Apprentices
(a) A certificate in vocational Course involving two years of study after the completion of the secondary stage of school education recognised by the All India Council for Technical education.
(b) A sandwich course student who is undergoing training in order that he may hold a certificate mentioned in (a) above “Schedule I-B [See rule 7(1A)] Sl. No. Board/State Council for Technical Education/ Other Authority/ course approved under any scheme Trade/Course/ Subject fields Duration of Trade/Course/ Subject field Designated trade(s) in the category of trade apprentices Period of Apprenticeship Training under the Apprentices Act,1961 Period of Apprenticeship Training after rebate
1. 2. 3. 4. 5. 6. 7.
1. 1. Maharashtra State Board of Vocational Education Examination, Mumbai
1. Interior Decorator One year 1. Architectural Assistant
2. Interior Designer and Decorator Two years Two years One year and six months One year and six months
2. Technique of Interior Designing One year 1. Architectural Assistant
2. Interior Designer and Decorator Two years Two years One year and six months One year and six months
3. Architect Draughtsman Two years 1. Architectural Assistant Two years One year
4. Architectural Graphics Designer Two years 1. Architectural Assistant Two years One year
5. Landscape Architecture Two years 1. Architectural Assistant Two years One year
6. Exterior And Interior Designer Two years 1. Architectural Assistant
2. Interior Designer and Decorator Two years Two years One year One year
7. Construction Supervisor One year 1. Building Maintenance Technician
2. Mason (Building Constructor) One year and three months Two years One year One year and six months
8. Building Site Supervisor One year 1. Building Maintenance Technician
2. Mason (Building Constructor) One year and three months Two years One year One year and six months
9. Civil Supervisor One year 1. Building Maintenance Technician
2. Mason (Building Constructor) One year and three months Two years One year One year and six months
10. Construction Technique One year 1. Building Maintenance Technician
2. Mason (Building Constructor) One year and three months Two years One year One year and six months
11. Civil Construction One year 1. Building Maintenance Technician
2. Mason (Building Constructor) One year and three months Two years One year One year and six months
12. Construction Surveying Two years 1. Building Maintenance Technician
2. Mason (Building Constructor) One year and three months Two years One year One year
13. Building Construction Supervisor Two years 1. Building Maintenance Technician
2. Mason (Building Constructor) One year and three months Two years One year One year
14. Building Maintenance Two years 1. Building Maintenance Technician
2. Mason (Building Constructor) One year and three months Two years One year One year
15. Building Construction Technology Two years 1. Building Maintenance Technician
2. Mason (Building Constructor) One year and three months Two years One year One year
16. Building Construction Management Two years 1. Building Maintenance Technician
2. Mason (Building Constructor) One year and three months Two years One year One year
17. Building Construction And Plumbing Two years 1. Building Maintenance Technician
2. Mason (Building Constructor)
3. Plumber One year and three months Two years Two years One year One year One year
18. Building Service And Maintenance Two years 1. Building Maintenance Technician
2. Mason (Building Constructor) One year and three months Two years One year One year
19. Carpentry And Furniture Making One year 1. Carpenter Two years One year and six months
20. Furniture Making And Designing Two years 1. Carpenter Two years One year
21. Furniture Making Two years 1. Carpenter Two years One year
22. Architect Draughtsman Two years 1. Draughtsman (Civil) Two years One year
23. Draughtsman Civil Two years 1. Draughtsman (Civil) Two years One year
24. Draughtsman Mechanical Two years 1. Draughtsman Mechanical Two years One year
25. Repair And Rewinding of Electrical Domestic Appliances Two years 1. Electrician
2. Wireman Two years Two years One year One year
26. Repair And Rewinding Of Electric Motors Two years 1. Electrician
2. Wireman Two years Two years One year One year
27. Electrical Engineering Two years 1. Electrician
2. Wireman Two years Two years One year One year
28. High Voltage Engineering Two years 1. Electrician
2. Wireman Two years Two years One year One year
29. Illumination Engineering Two years 1. Electrician
2. Wireman Two years Two years One year One year
30. Electrical Instrumentati on Two years 1. Electrician
2. Wireman Two years Two years One year One year
31. Electrician Two years 1. Electrician
2. Wireman Two years Two years One year One year
32. Radio And Audio System Two years 1. Electronic Mechanic Two years One year
33. T.V. Video System Two years 1. Electronic Mechanic Two years One year
34. Consumer Electronics Two years 1. Electronic Mechanic
2. Mechanic Consumer Electronics Two years Two years One year One year
35. Industrial Electronics Two years 1. Electronic Mechanic
2. Mechanic Communication Equipment Maintenance Two years Two years One year One year
36. Electronics Instrument & Measurement Two years 1. Electronic Mechanic Two years One year
37. Trouble Shooting of Electronics Equipment Two years 1. Electronic Mechanic
2. Mechanic Communication Equipment Maintenance Two years Two years One year One year
38. Electroplatin g Two years 1. Electroplater Two years One year
39. General Fitter cum Mechanic Two years 1. Fitter Two years One year
40. Mechanical Technician Two years 1. Fitter Two years One year
41. Mechanical Engineering Two years 1. Fitter Two years One year
42. Interior Decoration and Designing One year 1. Interior Designer and Decorator Two years One year and six months
43. Interior CAD Operator Two years 1. Interior Designer and Decorator Two years One year
44. Machinist Two years 1. Machinist Two years One year
45. Mechanical Engineering Two years 1. Machinist Two years One year
46. Mechanical Technician Two years 1. Machinist Two years One year
47. Machinist Grinder Two years 1. Machinist Grinder Two years One year
48. Maintenance Mechanic Chemical Plant Two years 1. Maintenance Mechanic Chemical Plant Two years One year
49. Hotel Management and Catering Technology One year 1. Food Production (General)
2. Food Production (Vegetarian)
3. Steward Two years Two years One year and three months One year and six months One year and six months One year
50. Cookery Technician One year 1. Food Production (General)
2. Food Production (Vegetarian) Two years Two years One year and six months One year and six months
51. Food Processing One year 1. Food Production (General)
2. Food Production (Vegetarian)
3. Steward Two years Two years One year and three months One year and six months One year and six months One year
52. Food Processing Technology Two years 1. Food Production (General)
2. Food Production (Vegetarian)
3. Steward Two years Two years One year and three months One year One year One year
53. Catering and Restaurant Management Two years 1. Food Production (General)
2. Food Production (Vegetarian)
3. Steward Two years Two years One year and three months One year One year One year
54. Foundryman One year 1. Foundryman Two years One year and six months
55. Electronics Technology One year 1. Mechanic Communication Equipment Maintenance Two years One year and six months
56. Mechanic of Industrial Electronics One year 1. Mechanic Communication Equipment Maintenance Two years One year and six months
57. Basic Electronics Engineering One year 1. Mechanic Communication Equipment Maintenance Two years One year and six months
58. Mechanic DTH / Communicati on System One year 1. Mechanic Communication Equipment Maintenance Two years One year and six months
59. Industrial Electronics Two years 1. Mechanic Communication Equipment Maintenance Two years One year and six months
60. Troubleshoot ing of Electronics Equipment Two years 1. Mechanic Communication Equipment Maintenance Two years One year and six months
61. Automobile Engineering One year 1. Mechanic Repair and Maintenance of Vehicle
2. Mechanic Motor Cycle
3. Mechanic Diesel Two years One year and three months Two years One year and six months One year One year and six months
62. Mechanic Auto Engineering One year 1. Mechanic Repair and Maintenance of Vehicle
2. Mechanic Motor Cycle
3. Mechanic Diesel Two years One year and three months Two years One year and six months One year One year and six months
63. Diesel Mechanic One year 1. Mechanic Repair and Maintenance of Vehicle
2. Mechanic Diesel Two years Two years One year and six months One year and six months
64. Auto Engineering Technology Two years 1. Mechanic Repair and Maintenance of Vehicle
2. Mechanic Motor Cycle
3. Mechanic Diesel
4. Mechanic Motor Vehicle Two years One year and three months Two years Two years One year One year One year One year
65. Auto Engineering Technician Two years 1. Mechanic Repair and Maintenance of Vehicle
2. Mechanic Motor Cycle
3. Mechanic Diesel
4. Mechanic Motor vehicle Two years One year and three months Two years Two years One year One year One year One year
66. Mechanic Motor Vehicle Two years 1. Mechanic Repair and Maintenance of Vehicle
2. Mechanic Motor Cycle
3. Mechanic Motor Vehicle Two years One year and three months Two years One year One year One year
67. Basic Refrigeration and Air Conditioning Two years 1. Mechanic Refrigeration and Air Conditioning Two years One year
68. Industrial Refrigeration and Air Conditioning Two years 1. Mechanic Refrigeration and Air Conditioning Two years One year
69. Air Conditioning and Refrigeration Technician Two years 1. Mechanic Refrigeration and Air Conditioning Two years One year
70. Automobile Electronics Two years 1. Mechanic Auto Electrical and Electronics Two years One year
71. Installation Maintenance and Service of Medical Equipment Two years 1. Mechanic Medical Electronics Two years One year
72. Water Supply and Sanitary Engineering Two years 1. Plumber
2. Pump Operator cum Mechanic
3. Sanitary Hardware Fitter Two years Two years One years and three months One year One year One year
73. Pump Operator cum Mechanic Two years 1. Plumber
2. Pump Operator cum Mechanic
3. Sanitary Hardware Fitter Two years Two years One years and three months One year One year One year
74. Mechanic Technology One year 1. Sheet Metal Worker Two years One year and six months
75. Sheet Metal Worker One year 1. Sheet Metal Worker Two years One year and six months
76. Mechanic al Engineering Two years 1. Sheet Metal Worker
2. Turner Two years Two years One year One year
77. Mechanic al Technician Two years 1. Sheet Metal Worker
2. Turner Two years Two years One year One year
78. General Fitter cum Mechanic Two years 1. Sheet Metal Worker Two years One year
79. Construction Surveyor Two years 1. Surveyor Two years One year
80. Turner Two years 1. Turner Two years One year
81. CNC Turning Two years 1. Turner Two years One year
82. Fabrication (Fitting and Welding) One year 1. Welder (Gas and Electric) One years and three months One year
83. Production and Manufacturin g One year 1. Welder (Gas and Electric) One years and three months One year
84. Structural Fabrication and Repairs Technology One year 1. Welder (Gas and Electric) One years and three months One year
85. General Welding Two years 1. Welder (Gas and Electric) One years and three months One year
86. Welding Technology Two years 1. Welder (Gas & Electric) One years and three months One year
87. Welding Fabrication and Automation Two years 1. Welder (Gas and Electric) One years and three months One year
88. Weld Testing and Quality Management Two years 1. Welder (Gas and Electric) One years and three months One year
89. Welding Technique Two years 1. Welder (Gas and Electric) One years and three months One year
90. Structure and Fabrication Two years 1. Welder (Gas and Electric) One years and three months One year
91. Electrical Wiring Estimation and Costing Two years 1. Wireman Two years One year
92. Repair and Rewinding of Electrical Domestic Appliances Two years 1. Wireman Two years One year
93. Repair and Rewinding of Electric Motors Two years 1. Wireman Two years One year
94. Lineman Two years 1. Wireman Two years One year
95. Hospitality One year 1. House Keeper (Hotel)
2. Steward One years and three months One year and three months One year One year
96. Facility Management One year 1. House Keeper (Hotel)
2. Steward One years and three months One year and three months One year One year
97. Hospitality Management Two years 1. House Keeper (Hotel)
2. Steward One years and three months One year and three months One year One year
98. Institutional House Keeping Two years 1. House Keeper (Hotel)
2. Steward One years and three months One year and three months One year One year
99. Hospitality Management In Offices Two years 1. House Keeper (Hotel)
2. Steward One years and three months One year and three months One year One year
100. Basic of Hospitality Industry Management Two years 1. House Keeper (Hotel)
2. Steward One years and three months One year and three months One year One year
101. Fashion Design and Jewelry Textile One year 1. Dress Maker One years and three months One year
102. Garments Manufacturin g and Fashion Designing One year 1. Dress Maker One years and three months One year
103. Apparel One year 1. Dress Maker One years and three months One year
104. Sewing Science Teacher One year 1. Dress Maker One years and three months One year
105. Sewing Cloth Dressing Teacher One year 1. Dress Maker One years and three months One year
106. Fashion Designing and Clothing Constructio n Two years 1. Dress Maker One years and three months One year
107. Commercial Garment Designing and Making Two years 1. Dress Maker One years and three months One year
108. Fashion Garment Making Two years 1. Dress Maker One years and three months One year
109. Clothing for Family Two years 1. Dress Maker One years and three months One year
110. Master of Tailoring Two years 1. Dress Maker One years and three months One year
111. Clothing of Embroidery Two years 1. Dress Maker
2. Surface Ornamentation Techniques (Embroiderer) One years and three months One years and three months One year One year
112. Fashion Merchandisi ng and Production Two years 1. Dress Maker One years and three months One year
113. Fashion Technology Two years 1. Dress Maker One years and three months One year
114. Profession al Beautician Two years 1. Hair and Skin Carer One years and three months One year
115. Creative Design and Pattern Cutting One year 1. Leather Goods Maker
2. Footwear Maker Two years Two years One year and six months One year and six months
116. Leather Footwear One year 1. Leather Goods Maker
2. Footwear Maker Two years Two years One year and six months One year and six months
117. Footwear Technolog y Two years 1. Leather Goods Maker
2. Footwear Maker Two years Two years One year One year
118. Manufactu ring of Leather Goods Two years 1. Leather Goods Maker
2. Footwear Maker Two years Two years One year One year
119. Leather Manufactu ring Two years 1. Leather Goods Maker
2. Footwear Maker Two years Two years One year One year
120. Bakery and Mithaikala One year 1. Baker and Confectioner Two years One year and six months
121. Bakery and Confection ery Technician One year 1. Baker and Confectioner Two years One year and six months
122. Bakery and Confection ery Manageme nt Two years 1. Baker and Confectioner Two years One year
123. Desk Top Publishing Technique Two years 1. Desk Top Publishing Operator Two years One year”.
SCHEDULE-II (See rule 4) Standard of physical fitness for training
(1) A candidate should be free evidence of any contagious or infectious disease. He should not be suffering from any disease which is likely to be aggravated by service or is likely to render him unfit for service or endanger the health of the public. He should also be free from evidence of tuberculosis in any form, active or healed.
(2) Height, Weight And Chest Candidates should satisfy the following minimum standards, namely:- HEIGHT: 137 centimeters; Weight:25.4 Kilogram; Chest expansion should not be less than 3.8 centimeters irrespective of size of chest: Provide that where a candidate does not satisfy the said minimum standards but is certified in writing by a Medical Officer not below the rank of an Assistant Surgeon (Gazetted), to be physically fit for being engaged as an apprentice in a particular trade under the Apprentices Act,1961, he may be engaged as an apprentice in that trade.
(3) EYES There should be no evidence of any morbid condition of either eye of the lids of either eye which may be liable to risk of aggravation of recurrence. Standard of Vision (A) Visual acuity: *Candidates having vision in one eye shall eligible to undergo apprenticeship training except in the following seventeen trades, namely :-
(1) Electrician Aircraft (2) Watch and Clock Mechanic
(3) Driver cum Fitter (4) Surveyor
(5) Process Cameraman (6) Sirdar
(7) Rigger(Engg. & Chem. Industry) (8) Shortfirer/Blaster(Mines)
(9) Mate(Mines) (10) Mech. Radio & Radar Aircraft
(11) Ceramic Moduler (12) Ceramic Caster
(13) Ceramic Kiln Operator (14) Ceramic Press Operator
(15) Ceramic Modeller (16) Ceramic Decorator
(17) Optical worker * Substituted vide GSR 221 dated 21st April 1993
(b) Colour vision: Not required
(4) EARS Hearing must be good in both ears and there should be no sign of suppurative disease. No hearing aid shall be permitted.
(5) SKIN There should be no evidence of acute or chronic skin disease or chronic ulceration.
(6) SPEECH: Speech should preferably be without impediment.
(7) ALIMENTARY SYSTEM:
1. Candidates should have sufficient number of natural teeth (in healthy state) for mastication.
2. Spleen should not be palpably enlarged and there should be no evidence of tenderness in the splenic area.
3. Liver should not be palpable or tender.
4. There should be no oral sepsis.
5. There should be no sugar in the urine.
6. Candidates should not be suffering from haemorrhoids, fissures in and testis anal hernia or bubonocele or ischio-rectal abscess or hydrocele.
(8) CARDIO VASCULAR SYSTEM:
1. Blood pressure should not exceed 85 diastolic and 140 systolic.
2. Candidates with low blood pressure (i.e. systolic below 100) should be rejected.
3. There should be no sign of any cardiovascular disease.
(9) RESPIRATORY SYSTEM: Candidates should be free from all diseases of respiratory system. There should be no deformity of chest which may cause impediment to breathing.
(10) GENITO URINARY SYSTEM There should be no evidence of genito urinary disease or any abnormality.
(11) SKELETAL SYSTEM:
1. The function of all limbs should be within normal limits.
2. There should be no evidence of serious deformity of the spinal column or of the extremities.
(12) NERVOUS SYSTEM: There should be no evidence of any disease of nervous system or of any mental disease.
(13) GLANDULAR SYSTEM: There should be no evidence of tuberculosis or other disease of the glandular system including the endocrine glands.
SCHEDULE-IIA (See rule 5) S. No. Name of State/ Union territory Ratio of Scheduled Caste apprentices to the total apprentices in designated trade Ratio of Scheduled Tribe apprentices to the total apprentices in designated trade
1. Andhra Pradesh 1:7 1:15
2. Arunachal Pradesh --- 1:2
3. Assam 1:15 1:9
4. Bihar 1:7 1:100
5. Chattisgarh 1:9 1:4
6. Gujarat 1:15 1:7
7. Goa 1:50 1:8
8. Haryana 1:5 ---
9. Himachal Pradesh 1:4 1:25
10. Jammu and Kashmir 1:12 1:9
11. Jharkhand 1:9 1:4
12. Karnataka 1:7 1:15
13. Kerala 1:10 1:100
14. Madhya Pradesh 1:7 1:5
15. Maharashtra 1:10 1:11
16. Manipur 1:33 1:3
17. Mizoram --- 1:2
18. Meghalaya --- 1:2
19. Nagaland --- 1:2
20. Odisha 1:7 1:4
21. Punjab 1:4 ---
22. Rajasthan 1:6 1:8
23. Sikkim 1:20 1:5
24. Tamil Nadu 1:5 1:100
25. Tripura 1:6 1:3
26. Telangana 1:16 1:32
27. Uttar Pradesh 1:5 1:100
28. Uttarakhand 1:6 1:3
29. West Bengal 1:5 1:20
30. Andaman and Nicobar Islands --- 1:13
31. Chandigarh 1:6 ---
32. Dadra and Nagar Haveli 1:50 1:2
33. Delhi 1:6 1:13
34. Daman and Diu 1:3 1:11
35. Lakshadweep --- 1:2
36. Puducherry 1:7 --- Schedule–III (See rule 14) FORMAT-1 Model Contract of Apprenticeship Training for Major/Minor* Apprentices
1. Name and address of establishment : _____________________ with Tel. no., Fax No. and E-mail address _____________________ _____________________
2. (a) Name of apprentice (Block Letters) : _____________________
(b) Father’s/Mother’s /Husband’s Name : _____________________
3. Address of apprentice : _____________________ _____________________
4. Gender (please √) : Male/Female/Transgender
5. Date of birth : ___________________ 6a) Whether belongs to SC/ST/OBC/PwD/Minority : Yes/No (please √ ) b) Name of the category : _____________________
7. Educational Qualification
(a) Academic Qualification : _____________________
(b) Technical qualification :
(i) Name of the Trade or Course : _____________________
(ii) Duration of Training or Course : From ______ To _______
(iii) Name of the Institute or College : _____________________
(iv) Name of the Council or University :_____________________
8. (a) Date of execution of contract : ____________________
(b) Age on the date of execution of contract : ____________________ Photograph of Apprentice
9. Name of the trade for which apprentice is for : ____________________ apprenticeship training
10. (a) Duration of apprenticeship training : ____ years _____months
(b) Period of apprenticeship training : From _____ To _______
11. Rates of Stipend: The minimum prescribed stipend per month to be paid by the employer to apprentice
(a) During 1st year of training : Rs. __________________
(b) During 2nd year of training : Rs. __________________
(c) During 3rd and 4th year of training : Rs. __________________
12. (a) Name and address of Guardian : _____________________ (in case of apprentice is minor)
(b) Relationship with the apprentice : _____________________
13. Name and Address of the Surety : _____________________ _____________________
14. We, the Employer, Apprentice or Guardian** and the Surety solemnly declare that we have read the Apprentices Act, 1961 and the Apprenticeship Rules, 1992 regarding the contract of apprenticeship training including obligations and agree to abide by all the provisions made thereunder. In case of default by the either the apprentice or the employer, we agree to compensate the other party as per the provisions of the Apprenticeship Rules, 1992 (Main Provisions of the Rules may be seen in the Enclosure). ____________ ____________ __________________ ____________ Signature of the Signature of Signature of Guardian** Signature of Employer with seal Apprentice Surety
15. Name of Witnesses with their Address
(1) _______________________________
(2) _______________________________ ***16. Contract Registration Number : _____________________ (To be given by the Office of the Apprenticeship Adviser) * Minor apprentice is an apprentice who has not completed eighteen years of age. ** Guardian, in case of minor apprentices *** Mandatory only for designated trades Enclosure to Contract of Apprenticeship Training The main provisions of the Apprenticeship Rules relating to the Contract of Apprenticeship Training are -
1. The employer shall pay stipend per month to the trade apprentices at the minimum rates (as per the provision of sub-rule(1) of rule 11 of the Apprenticeship Rules, 1992)
(a) During 1st year of training : Seventy per cent. of minimum wage of semi-skilled workers notified by the respective State or Union territory
(b) During 2nd year of training : Eighty per cent. of minimum wage of semi-skilled workers notified by the respective State or Union territory
(c) During 3rd and 4th year of training : Ninety per cent. of minimum wage of semi-skilled workers notified by the respective State or Union territory:
Provided that in the case where the minimum rate of wage for a trade is not notified by the State Government or Union territory, then, the maximum of minimum wages of the Scheduled Employment notified by such State Government or Union territory for semi-skilled workers shall be taken into account for paying the stipend in respect of that trade:
Provided further that in the case of trade apprentices referred to in clause (a) of section 6 of the Act, the period of training already undergone by them in a school or other institution recognised by the National Council, shall be taken into account for the purpose of determining the rate of stipend payable”.
2. The employer shall pay stipend per month to the Graduate, Technician and Technician (Vocational) apprentices at the minimum rates (as per the provisions of subrule (2) of rule 11 of the Apprenticeship Rules, 1992)
(a) Graduate Apprentices : Rs. 4984
(b) Sandwich Course : Rs. 3542 (Students from Degree Institutions)
(c) Technician Apprentices : Rs. 3542
(d) Sandwich course : Rs. 2890 (Students from Diploma Institutions)
(e) Technician (Vocational) Apprentices : Rs. 2758
3. The stipend prescribed for graduate apprentices shall be paid by the employer to those apprentices who possess a degree of minimum three years duration after 10+2 system of education and undergoing apprenticeship training in optional trade.
4. The stipend prescribed for technician apprentices shall be paid by the employer to those apprentices who possess a diploma of three years after 10th class or diploma of two years after 12th pass and undergoing apprenticeship training in optional trade.
5. The stipend prescribed for technician (vocational) apprentices shall be paid by the employer to those apprentices who possess a certificate in vocational course involving two years of study after completion of secondary stage of school education and undergoing apprenticeship training in optional trade.
6. The stipend prescribed for trade apprentices shall be paid by the employer to all other apprentices undergoing apprenticeship training in optional trade according to their period of apprenticeship training.
7. The stipend for a particular month shall be paid by the tenth day of the following month. No deduction shall be made from the stipend for the period during which an apprentice remain on leave as observed in the establishment.
8. Where the Contract of Apprenticeship is terminated through failure on the part of the employer in carrying out the terms and conditions of the Contract (as notified under the Apprenticeship Rules, 1992), he shall pay to the apprentice such compensation as may be provided by the Central Government.
9. In the event of premature termination of Contract of Apprenticeship for failure on the part of apprentice to carry out the terms and condition of the contract (as notified under the Apprenticeship Rules, 1992), the surety at the request of apprentice hereby guarantees to employer the payment of such amount as determined by the Apprenticeship Adviser as and towards the cost of training.
10. The liability of the surety is limited to an amount of two thousand five hundred rupees with interest at twelve per cent. per annum FORMAT- 2 Proforma of Work Diary Name and Address of Establishment : Name of Apprentice : Trade : Registration Number : Serial Number Date (Week) Competencies covered during the week Signature of Supervisor From To Note: The list of competencies to be indicated as laid down in the course of trade. The work diary shall be maintained by the Apprentice and countersigned by his supervisor once a week. FORM APPRENTICESHIP RECORD OF PROGRESS OF APPRENTICE : (To be submitted once in a quarter in respect of graduate or technician or technician (vocational) apprentices)
(1). Name of Apprentice………………………………..
(2). Registration Number ........................................…......
(3). Subject field in Engineering or Technology or Vocational Course............................
(4). Under training at ...……………………………..........................................................
(5). Date of commencement of training..
(6). Area of training during the quarter .........................................................................
(7). Progress report for quarter .......................... to .............................…………...
(i) Aptitude for training ________________________________________________
(ii) Performance during the quarter ________________________________________
(iii) Shortcomings, if any________________________________________________
(iii) Reaction of trainee to corrective action at (iii) above___________________________
(v) Assessment:- Excellent/Above Average/Average/Below Average (Strike out those not applicable) Signature of Officer/Executive In-charge of Training Remarks Signature of Manager of the Industry/Establishment.”
SCHEDULE-IV (See Rule 9)
1. In case of Trade Apprentices;-
(a) Must possess a degree or diploma in engineering or technology or equivalent qualification recognised by Government of India.
(b) National Apprenticeship Certificate with minimum five years experience.
2. In the case of Graduate Apprentices: Must hold a degree in engineering or technology or equivalent qualification as recognised by the Government of India.
3. In the case of Technician and Technician (Vocational) Apprentices:- Must hold degree or diploma in engineering or certificate in Vocational courses or equivalent qualification recognised by the Government of India.
4. The person placed in over all charge of training of apprentices may be assisted by such number, as is considered necessary, of shop floor or workshop personnel who have practical know how to guide the apprentices. It is desirable that the person in charge should have industrial experience.
5. Desirable qualification in the case of 1,2 and 3 above : Training in Central Staff Training and Research Institute/Technical Teacher Training Institute/Central Training Institute. *SCHEDULE IV A (See rule 9 A) I STAFFING PATTERN
(a) BASIC TRAINING CENTRE
1. One Trade Instructor for every 16 apprentices
2. One Drawing Instructor for every 150 apprentices
3. One Instructor for every 150 apprentices (W/Shop Calculation and Science)
4. One Social Study Instructor for every 400 apprentices
(b) SHOP FLOOR TRAINING INCLUDING RELATED INSTRUCTIONS
1. One Trade Instructor for every 40 apprentices
2. One Drawing Instructor for every 150 apprentices
3. One Instructor for every 150 apprentices (W/Shop Calculation and Science) II QUALIFICATIONS OF INSTRUCTIONAL STAFF FOR BASIC TRAINING CENTRE AND SHOP FLOOR TRAINING INCLUDING RELATED INSTRUCTIONS. TRADE INSTRUCTOR/ DRAWING INSTRUCTOR/ WORKSHOP CALCULATION AND SCIENCE INSTRUCTOR Essential: (a) (i) Passed 10th standard
(ii) Passed National Apprenticeship Certificate Examination in relevant trade with five years experience in industry. OR
(b) Diploma in Engineering/Technology in appropriate branch with three years experience. Desirable : Passed Instructor Training Course in relevant trade from any of the Advanced Training Institute or Central Training Institute for Instructors under the Directorate General of Employment and Training, Ministry of Labour. ____________________________________________ * Inserted vide GSR 190(E) dated 26th Feb. 1999
SCHEDULE-V (See Rule 6) I. Obligations of Employer (both in the case of Major and Minor Trade Apprentices. (Under section II of the Apprentices Act,1961)
1. The employer shall make suitable arrangements in the workshop for imparting a course of practical training to the apprentice in accordance with the programme approved by the Central/State Apprenticeship Adviser and the syllabus approved by the Central Government in consultation with the Central Apprenticeship Council.
2. The employer shall release the apprentice for receiving related instructions as required by section 10 of the Apprentices Act. 1961, treating any time spent in attending such classes as part of his paid period of work.
3.(a) The employer shall pay stipend to the apprentice at the rate as specified from time to time under rule II of the Apprenticeship Rules 1992.
(b) The stipend for a particular month shall be paid by the 10th day of the following month. No deduction shall be made from the stipend for the period during which the apprentice remains on casual or medical leave. Stipend shall, however not be paid for the period for which the apprentice remains on extraordinary leave.
4.(a) The weekly hours of work of an apprentice while undergoing practical training shall be as follows :
(i) The total number of hours per week shall be 42 to 48 hours (including the time spent on related instructions);
(ii) Apprentice during basic training shall ordinarily work for 42 hours per week including the time spent on related instruction;
(iii) Apprentice during the second year of apprenticeship shall work for 42 to 45 hours per week including the time spent on related instructions;
(iv) Apprentice during the third and subsequent years of apprenticeship shall work for the same number of hours per week as the workers in the trade in the establishment in which the apprentice is undergoing apprenticeship training: of hours per week as the workers in the trade in the establishment in which the apprentice is undergoing apprenticeship training:
Provided, however, that short term apprentice may be engaged to work upto a limit of 48 hours per week.
(b) No apprentice other than a short term apprentice, shall be engaged on such training between the hours of 10 p.m. and 6 a.m. except with the prior approval of the apprenticeship Adviser who may give his approval if he is satisfied that it is in the interest of the training of the apprentice or in public interest.
(5). Where the contract of apprenticeship is terminated on account of failure on the part of the employer to carry out the terms and conditions of the contract, he shall pay to the apprentice or his guardian (in the case of a minor) compensation in accordance with the rates as specified under rule 8 of the Apprenticeship Rules, 1992.
(6) The employer shall allow to the apprentice such holidays as are observed in the establishment.
(7) If personal injury is caused to an apprentice by accident arising out of and in the course of his training as an apprentice, the employer shall pay to the apprentice compensation in accordance with the provisions of the Workmen Compensation Act, 1923, subject to the modifications specified in the Schedule to the Apprentices Act,1961. II. Obligations of Trade Apprentice (both in case of Major and Minor Trade Apprentices ) (Under Section 12 of Apprentices Act.1961).
(1) The apprentice shall abide by the rules and regulations of the establishment in all matters of conduct and discipline and carry out all lawful orders of the employer and superiors in the establishment.
(2) The apprentice shall conduct himself as a trainee and not as a worker, learn his trade conscientiously and diligently and endeavour to qualify himself as a skilled Craftsmen in his trade before the expiry of the period of training. Save as provided in the Apprentices Act. 1961 provisions of any law with respect to Labour will not be applicable to him.
(3) The apprentice shall attend practical (basic and shop-floor training and related instructions) classes regularly.
(4) The apprentice shall appear for periodical tests that may be conducted by the employer or other authorities concerned by the National Council for Vocational Training for award of a certificate of proficiency in the trade.
(5) In the event of premature termination of contract of apprenticeship for failure on the part of the apprentice to carry out the terms and conditions of contract, the surety or the guardian may be bound to pay the employer such amount as may be determined by the Central/State Apprenticeship Adviser as and towards the cost of training in accordance with rates as specified under rule 8 of the Apprenticeship rules,1992.
(6) Except in case of extreme urgency the apprentice shall submit applications for all leave except medical leave to the appropriate authority and obtain sanction before the leave is taken.
(7) The apprentice, his/her guardian (in case of minor) declares that no other contract of apprenticeship subsists already between him and any other employer (in respect of minor apprentice, by the guardian) and undertake that he shall not enter into any other contract of apprenticeship with any other employer (in respect of minor apprentice, by the guardian) before the expiry or termination of the contract of apprenticeship.
(8) The apprentice or his/her guardian (in case of minor) shall not enter into any other contract of apprenticeship with any other employer in respect of the apprentices mentioned in the first recital before the expiry or termination of the contract of apprenticeship.
(9) The first six months of the period of apprenticeship training shall be treated as period on probation. Either party may make as application to the Central/State Apprenticeship Adviser for the earlier termination of contract and when such an application is made the party making the application shall send by post a copy thereof to the other party to the contract. The Central/State Apprenticeship Adviser after considering the contents of the application and objectives, if any, filed by the other party, may terminate the contract, if he is satisfied that the parties to the contract, if any, of them have or has failed to carry out the terms and conditions of the contract and that it is desirable in the interests of the parties or any of them to terminate the same. Provided that the amount as stated in paras I(6) and II(5) of this schedule shall become payable by one party to the other accordingly as the failure is on the part of the employer or the apprentice:
Provided further that no compensation shall be payable by the employer to the guardian of the apprentice if the employer to the guardian of the apprentice if the employer makes an application to the Central State Apprenticeship Adviser during the period the apprentice is on probation for the termination of the contract on the ground that the apprentice on the trade in which he has been engaged and that his guardian has refused to allow him to undergo apprenticeship training in another designated trade for which he is found suitable by the employer and if the Central/State Apprenticeship Adviser, after considering the contents of the application of the employer and the objections, if any, filed by the other party is satisfied that it is desirable in the interests of the parties or any of them to terminate the contract.
(10) It shall not be obligatory on the part of the employer to offer any employment to the apprentice on completion of period of his apprenticeship training in his establishment nor shall it be obligatory on the part of the apprentice to accept an employment under the employer:
Provided that if there is any recruitment, employer shall formulate its own policy for recruiting any apprentice who has completed the period of apprenticeship training in his establishment in terms of sub-section(1) of section 22 of the Act”;
(11) Any disagreement or dispute between the employer and the guardian of the apprentice arising out of the contract shall be referred to the Central/State Apprenticeship Adviser, for decision and any person aggrieved by the decision of the Central State Apprenticeship Adviser, may within 30 days from the date of communication to him of such decision, prefer as appeal against the decision to the Central/State Apprenticeship Council and such appeal shall be heard and determined by the Committee of that Council appointed for the purpose. The decision of such Committee shall be final.
SCHEDULE VI (See rule 6) TERMS AND CONDITIONS OF THE CONTRACT OF APPRENTICESHIP FOR GRADUATE TECHNICIAN AND TECHNICIAN (VOCATIONAL) APPRENTICES.
1. The period of training shall be one year (in the case of Sandwich students, the period of training shall be stipulated in the curriculum).
2. It shall not be obligatory on the part of the employer to offer any employment to the apprentice on completion of period of his apprenticeship training in his establishment nor shall it be obligatory on the part of the apprentice to accept an employment under the employer:
Provided that if there is any recruitment, employer shall formulate its own policy for recruiting any apprentice who has completed the period of apprenticeship training in his establishment in terms of sub-section(1) of section (22) of the Act
3. Every apprentice undergoing apprenticeship training in an establishment shall be a trainee and not a worker and as such the provisions of any law with respect to Labour shall not apply to or in relation to such apprentice. 4 (i) The apprentices shall abide by the rules and regulations of the establishment in all matters of conduct and discipline and safety and carry out all lawful orders of the employer and superiors in the establishment.
(ii) The apprentice shall learn his subject field conscientiously and diligently and attend to practical and instructional classes regularly.
(iii) The apprentice shall maintain a record of his work during the period of his apprenticeship training in a proforma approved by the Apprenticeship Adviser.
(iv) Where the contract of apprenticeship is terminated for failure on the part of the apprentice to carry out the terms of contract, the apprentice shall refund to the employer as cost of training such amount as may be determined by the Apprenticeship Adviser. In such event, the apprentices shall not be entitled to enter into another contract of Apprenticeship under the Act with any other employer.
(v) The contract of apprenticeship can be terminated without compensation payable to the apprentices:-
(a) If he/she secures gainful employment(on production of copy of the appointment order); and
(b) If he/she is unable to continue training on medical grounds (on production of a certificate to this effect from a Medical Officer not below the rank of Civil Surgeon).
(vi) For breach of contract by the employer, the employer shall pay compensation to the apprentice in accordance with rates specified under rule 8 of these rules.
(vii) Continuance of payment of stipend shall depend on satisfactory performance of the apprentice during the training period. 5(i) The employer shall make suitable arrangement in his establishment for imparting a course of apprenticeship training to the apprentice in accordance with the provisions of the Act and rules made thereunder and with the approval of the respective Regional central Apprenticeship Adviser.
(ii) Every employer is required to formulate a "Training Programme" for the training of Graduate/Technician (Vocational) Apprentices and get it approved by the respective Regional Central Apprenticeship Adviser.
(iii) The employer will arrange for a suitable person to be placed in charge of training of apprentices as laid down under the Act and the rules made thereunder. 6(i) A Graduate, Technician and Technician (Vocational) Apprentice shall work according to the normal hours of work of the department in the establishment to which he or she is attached for training
(ii) The stipend for a particular month shall be paid before the 10th day of the following month. List of Designated Trades under the Apprentices Act, 1961 Schedule–III Model Contract of Apprenticeship Training for Major/Minor* Apprentices FORMAT- 2 Proforma of Work Diary