(1) Every person engaged in recycling or processing of plastic waste shall prepare and submit an annual report in Form-IV to the local body concerned under intimation to the concerned State Pollution Control Board or Pollution Control Committee by the 30th April, of every year.
(2) Every local body shall prepare and submit an annual report in Form -V to the concerned Secretary-in-charge of the Urban Development Department under intimation to the concerned State Pollution Control Board or Pollution Control Committee by the 30th June, everyyear.
(3) Each State Pollution Control Board or Pollution Control Committee shall prepare and submit an annual report in Form VI to the CPCB on the implementation of these rules by the 31st July, of every year.
(4) The CPCB shall prepare a consolidated annual report on the use and management of plastic waste and forward it to the Central Government along with its recommendations before the 31st August of every year.
Schedule-I [See rule 10]
1. IS / ISO 14851: 1999 Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium-Method by measuring the oxygen demand in a closed Respirometer
2. IS / ISO 14852: 1999 Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium-Method by analysis of evolved carbon dioxide
3. IS / ISO 14853: 2005 Plastics- Determination of the ultimate anaerobic biodegradation of plastic materials in an aqueous system-Method by measurement of biogas production
4. IS /ISO 14855-1: 2005 Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions-Method by analysis of evolved carbon dioxide (Part-1 General method)
5. IS / ISO 14855-2: 2007 Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions-Method by analysis of evolved carbon dioxide (Part-2: Gravimetric measurement of carbon dioxide evolved in a laboratory- scale test )
6. IS / ISO 15985: 2004 Plastics- Determination of the ultimate anaerobic biodegradation and disintegration under high-solids anaerobic digestion conditions- Methods by analysis of released biogas
7. IS /ISO 16929: 2002 Plastics- Determination of degree of disintegration of plastic materials under defined composting conditions in a pilot - scale test
8. IS / ISO 17556: 2003 Plastics- Determination of ultimate aerobic biodegradability in soil by measuring the oxygen demand in a Respirometer or the amount of carbon dioxide evolved
9. IS / ISO 20200:2004 Plastics- Determination of degree of disintegration of plastic materials under simulated composting conditions in a laboratory - scale test FORM - I [See rules 13 (2)] APPLICATION FOR REGISTRATION FOR PRODUCERS or Brand Owners From: ..........................................
............................................ (Name and full address of the occupier) To The Member Secretary, .......................... Pollution Control Board or Pollution Control Committee Sir, I /We hereby apply for registration under rule 9 of the Plastic Waste Management Rules, 2015
1. Producers
PART-A GENERAL
1.(a) Name and location of the unit
(b) Address of the unit
(c) Registration required for manufacturing of:
(i) Carry bags;
(a) petro- based,
(b) Compostable
(ii) Multilayered plastics
(d) Manufacturing capacity
(e) In case of renewal, previous registration number and date of registration
2. Is the unit registered with the District Industries Centre of the State Government or Union territory? If yes, attach a copy.
3.(a) Total capital invested on the project
(b) Year of commencement of production 4 (a) List and quantum of products and by-products
(b) List and quantum of raw materials used
5. Furnish a flow diagram of manufacturing process showing input and output in terms of products and waste generated including for captive power generation and water.
6. Status of compliance with these rules- Thickness - fifty micron (Yes/No)
PART-B PERTAINING TO LIQUID EFFLUENT AND GASEOUS EMISSIONS
7. (a) Does the unit have a valid consent under the Water (Prevention and control of Pollution) Act, 1974 (6 of 1974)?
If yes, attach a copy
(b) Does the unit have a valid consent under the Air (Prevention and Control of Pollution) Act, 1981 (14 of 1981)?
If yes, attach a copy
PART-C PERTAINING TO WASTE
8. Solid Wastes or rejects:
(a) Total quantum of waste generated
(b) Mode of storage within the plant
(c) Provision made for disposal of wastes
9. Attach or Provide list of person supplying plastic to be used as raw material to manufacture carry bags or plastic sheet of like or multilayered packaging
10. Attach or provide list of personnel or brand Owners to whom the products will be supplied
11. Action plan on collecting back the plastic wastes Name and Signature Designation Date :
Place :
II Brand Owners:
PART-A GENERAL
1. Name, address and Contact number 2 In case of renewal, previous registration number and date of registration 3 Is the unit registered with the District Industries Centre of the State Government or Union Name and Signature territory? If yes, attach a copy.
4.(a) Total capital invested on the project
(b) Year of commencement of production
5. (a) List and quantum of products and by-products
(b) List and quantum of raw materials used
PART-B PERTAINING TO LIQUID EFFLUENT AND GASEOUS EMISSIONS 5 Does the unit have a valid consent under the Water (Prevention and control of Pollution) Act, 1974 (6 of 1974)?
If yes, attach a copy 6 Does the unit have a valid consent under the Air (Prevention and Control of Pollution) Act, 1981 (14 of 1981)?
If yes, attach a copy
PART-C PERTAINING TO WASTE
7. Solid Wastes or rejects:
(c) Total quantum of waste generated
(d) Mode of storage within the plant
(d) Provision made for disposal of wastes
8. Attach or Provide list of person supplying plastic material 9 Action plan on collecting back the plastic wastes Designation Date :
Place :
FORM - II [see rule 13 (3)] APPLICATION FORM FOR REGISTRATION OF UNITS ENGAGED IN PROCESSING OR RECYCLING OF PLASTIC WASTE
1. Name and Address of the unit
2. Contact person with designation, Tel./Fax /email
3. Date of commencement
4. No. of workers (including contract labour)
5. Consents Validity a. Water (Prevention & Control of Pollution) Act, 1974;
Valid up to _________________ b. Air (Prevention & Control of Pollution) Act, 1981;
Valid up to_________________ c. Authorization ; valid up to ....
6. Manufacturing Process Please attach a flow diagram of the manufacturing process flow diagram for each product.
7. Products and installed capacity of production (MTA) Products Installed capacity
8. Waste Management: S No !ype Category Qty.
a. Waste generation in processing plastic-waste
(i)
(ii)
(iii) b. Waste Collection and transportation (attach details) c. Waste Disposal details S No !ype Category Qty
(i)
(ii) d. Provide details of the disposal facility, whether the facility is authorized by SPCB or PCC e. Please attach analysis report of characterization of waste generated (including leachate test if applicable)
9. Details of plastic waste proposed to be acquired through sale, auction, contract or import, as the case may be, for use as raw material
(i) Name
(ii) Quantity required /year
10. Occupational safety and health aspects Please provide details of facilities
11. Pollution Control Measures Whether the unit has adequate pollution control systems or equipment to meet the standards of emission or effluent.
If Yes, please furnish details Whether unit is in compliance with conditions laid down in the said rules.
Yes/No Whether conditions exist or are likely to exist of the material being handled or processed posing adverse immediate or delayed impacts on the environment.
Yes/No Whether conditions exist (or are likely to exist) of the material being handled or processed by any means capable of yielding another material (e.g. leachate) which may possess eco-toxicity.
Yes/No
12. Any other relevant information including fire or accident mitigative measures
13. List of enclosures as per rule Name and Signature Designation Date :
Place :
FORM - III [See rules 13(4)] APPLICATION FOR REGISTRATION FOR MANUFACTURERS of plastic raw materials From: .........................................
............................................ (Name and full address of the occupier) To The Member Secretary, .......................... Pollution Control Board or Pollution Control Committee Sir, I/We hereby apply for registration under the Plastic Waste Management Rules, 2011
PART-A GENERAL
1.(a) Name and location of the unit
(b) Address of the unit
(c) In case of renewal, previous registration number and date of registration
2. Is the unit registered with the DIC or DCSSI of the State Government or Union territory? If yes, attach a copy.
3.(a) Total capital invested on the project
(b) Year of commencement of production
(c) List of producers and quantum of raw materials supplied to producers Name and Signature Date :
Designation Place :
Form - IV [See rules 17 (1)] Format of Annual Report by Operator of plastic waste processing or recycling Facility to the Local Body Period of Reporting:
(1) Name and Address of operator of the facility
(2) Name of officer in-charge of the facility (Telephone/Fax/Mobile/ E-mail)
(3) Capacity:
(4) Technologies used for management of plastic waste:
(5) Quantity of plastic waste received during the year being reported upon along with the source
(6) Quantity of plastic waste processed (in tons):
- Plastic waste recycled(in tons) - Plastic waste processed (in tons) - Used (in tons)
(7) Quantity of inert or rejects sent for final disposal to landfill sites:
(8) Details of land fill facility to which inert or rejects were sent for final disposal:
- Address -Telephone
(9) Attach status of compliance to environmental conditions, if any specified during grant of Consent or registration Signature of Operator Dated :
Place:
Form - V [See rules 17(2)] FORMAT FOR ANNUAL REPORT ON PLASTIC WASTE MANAGEMENT TO BE SUBMITTED BY THE LOCAL BODY Period of Reporting:
(1) Name of the City or Town and State:
(2) Population
(3) Area in sq. kilometers
(4) Name & Address of Local body Telephone No.
Fax No.
E-mail:
(5) Total Numbers of the wards in the area under jurisdiction
(6) Total Numbers of Households in the area under jurisdiction
(7) Number of households covered by door to door collection
(8) Total number of commercial establishments and Institutions in the area under jurisdiction -Commercial establishments - Institutions
(9) Number of commercial establishments and Institutions covered by door to door collection -Commercial establishments - Institutions
(10) Summary of the mechanisms put in place for management of plastic waste in the area under jurisdiction along with the details of agencies involved in door to door collection
(11) Attach details of infrastructure put in place for management of plastic waste generated in the area under jurisdiction
(12) Attach details of infrastructure required, if any along with justification
(13) Quantity of Plastic Waste generated during the year from area under jurisdiction (in tons)
(14) Quantity of Plastic Waste collected during the year from area under jurisdiction (in tons)
(15) Quantity of plastic waste channelized for recycling during the year (in tons)
(16) Quantity of plastic waste channelized for use during the year (in tons)
(17) Quantity of inert or rejects sent to landfill sites during the year (in tons)
(18) Details of each of facilities used for processing and disposal of plastic waste Facility-I i) Name of operator ii) Address with Telephone Number or Mobile iii) Capacity iv) Technology Used v) Registration Number vi) Validity of Registration (up to) Facility-II i) Name of operator ii) Address with Telephone Number or Mobile iii) Capacity iv) Technology Used v) Registration Number Validity of Registration (up to)
(19) Give details of:
Local body's own manpower deployed for collection including street sweeping, secondary storage, transportation, processing and disposal of waste.
(20) Give details of:
Contractor or concessionaire's manpower deployed for collection including street sweeping, secondary storage, transportation, processing and disposal of waste.
(21) Mention briefly, the difficulties being experienced by the local body in complying with provisions of these rules including the financial constrains, if any
(22) Whether an Action Plan has been prepared for improving solid waste management practices in the city? If yes (attach copy) Date of revision:
Signature of CEO or Municipal Commissioner or Executive Officer or Chief Officer Date:
Place:
Form-VI STATE-WISE STATUS OF IMPLEMENTATION OF PLASTIC WASTE MANAGEMENT RULES, 2016 FOR THE YEAR ...ANNUAL REPORT Format Name of the SPCB or PCC Estimated Plastic Waste generation Tons Per Annum (TPA) No. Of registered Plastic Manufacturing or Recycling (including multilayer, compostable) units. (Rule 9) No. of Unregistere d plastic manufactur ing Recycling units. (in residential or unapproved areas) Details of Plastic Waste Management (PWM) e.g.
Collection, Segregation, Disposal (Co-processing road construction etc.) (Rules 6) (Attach separate sheet) Partial or complete ban on usages of Plastic Carry Bags (through Executive Order) ( Attach copy of notification or executive order ) Status of Marking Labelling on carry bags (Rule 8) [Specify the number of units or not complied)co mplied Explici t Pricin g of carry bags (Rule 10) Details of the meeting of State Level Advisory Body (SLA) along with its recommend ations on Implementa tion (Rule 11) No. of violation s and action taken on noncomplia nce of provisio ns of these Rules Number of Municipal Authority or Gram Panchayatun der jurisdiction and Submission of Annual Report to CPCB (Rule 12) Plasti c units Compo stable Plastic Units Multilay er Plastic units
(1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11) [F.No. 17-2/2001-HSMD] Bishwanath Sinha Joint Secretary to Government of India 22