Chandigarh, dated, the I) Jll p- 01/ CHANDIGARH ADMINISTRATION HOME DEPARTMENT NOTIFICATION .' . 'J C TflQ -.. T~ i-\~JJ :,~EASURES ': "r.y r~u ,09-. ' ,,'~ l"\ ll.lll V ~ ", ,.ft, NOA/4/21-HII(3)-2011/ (6 (,S'cJ With reference to Chandigarh Administration, Home Department's NotificatioD...NG-A/4/21-HII(3)-2011/7419 do:ed 26.4.2011 and in exercise of the powers conferred by Sub section !. o~ Sectior S3 of the Legal I\1etrology Act 2009, the Administrator, Union Territo:')!. ,-,ild;:digarh is pleased to make the following rules namely: THE CHANDIGARH LEGAL METROLOGY (ENFORCEMENT) rUES, 2011
1. Short title and commencement-
(1) These rules may be called the Chandigarh Leljal [vletrology (Enforcement) Rules, 2011
(2) They shall extend to the whole of U.T. Chandigarh.
(3) They shall come into force from the date of its pUQi:cat:on in the official Gazette.
2. Definition~ - In these rules, unless the context oth(,i'\\li~:c: . " ':i" ',_~ -
(a) "Act" means the Legal Metrology Act, 2009.
(b) "Reference Standards Laboratory" means a lat.":JrCl1:cry set up by the Central Government under the Act, wh·~':re f<.eference Standards, Secondary Standards and Working StCinJdrds are maintained:
(c) "Schedule" means a schedule appended to thE'~·.-: n.. es:
(d) Words and expressions used in these rules c' ,e: r.'l defined but defined in the Act shall have the meanin~'c: res;Jectively assigned to them in the Act.
3. Reference Standards - The Reference Standards shall be kept at such ,'12(,':, in such manner and in such custody as prescribed under the L.f:'(;C1! "'letrology (National Standards) Rules, 2011.
4. Secondary Standards -
(1) Every Secondary Standards shali be verifie:. ,:t c:r~v of the Reference Standards Laboratories, in such manner and at Sl.::~, :_~ :riodical ADMIN Text Box ADMIN Text Box ADMIN Text Box Intervals as may be prescribed under the rules and shall, if found on such verification to conform to the Standards established by or under that Act, be stamped by Reference Standard Laboratory or a certificate of verification will be issued by that laboratory.
(2) The Secondary Standards shall be kept at such place, and in such custody as the Controller may direct.
5. Working Standards -
(1) Every Working Standard shall be verified either at any of the Reference Standards laboratories or at any of the Secondary Standards Laboratories maintained by the State Government, in such manner and at such periodical intervals as may be prescribed under the rules and shall, if found on such verification to conform to the Standards established by or under the Act, be stamped or certificate of verification will be issued by that laboratory as the case may be.
(2) The Working Standards shall be kept in the custody of Legal Metrology Officer.
6. Secondary Standard balances -
(1) A set of Secondary standard balances shall be maintained at every place where Secondary Standard Weights are kept.
(2) The number, types and specifications of such balances shall be such as may be prescribed under the Legal Metrology (General) Rules,
2011.
(3) Every Secondary Standard balance shall be verified at least once within a period of twelve months and shall be adjustec.. if necessary, to make it correct within the limits of sensitivity and other metrological qualities prescribed under the Act, by the Reference Sta:lderds LJboratory or by the Controller or such other officer as may be authorized by the Controller in this behalf.
7. Working Standard Balances:
(1) A set of Working Standard balances shall be maintained at every place where Working Standard Weights are kept.
(2) The number, types and specifications of such balances shall be such as may be prescribed under the Legal Metrology (General) Rules,
2011.
(3) Every Secondary Standard balance shall be verified at least once within a period of twelve months and shall be adjusted, if necessary, to make it correct within the limits of sensitivity and other metrological qualities prescribed under the Legal Metrology (General) Rules, 2011, by the Reference Standard Laboratory or at any of the place where Secondary Standards are maintained by the State Government.
8. Physical characteristics, configuration, constructional details of Weights and Measures- Every Weight or measure used or intended to be used in any transaction or for protection shall conform as regards physical characteristic, configuration, constructional details, materials, performance, tolerances and such other details, to the specifications prescribed under the Act or the Legal Metrology (General) Rules, 2.011.
9. Use of Bullion Weights, Carat Weights etc. -
(1) No Weight other than a Bullion Weight, as specified in General Rules, 2011, shall be used in any transaction or for protection in bullion including precious metals, pearls, ornaments or other articles made of gold or silver.
(2) No weight other than a carat weight shall be used in any transaction in precious stones.
(3) Only beam scale of class A or class B category or a non automatic weighing instrument of high accuracy class (class II) or special accuracy class (class I) shall be used in any transaction referred to in sub rules (1) and (2).
10. Use of weights only or measures only or number only in certain cases. - Except in the cases of commodities specified in Schedule I, the declaration of quantity in every transaction, dealing or contract, or for protection shall be terms of the unit of -
(a) weight, if the commodity is solid, semi-solid, viscous or a mixture of solid and liquid;
(b) length, if the commodity is sold by linear measure;
(c) area, if the commodity is sold by area measure;
(d) volume, if the commodity is liquid or is sold by cubic measure; or
(e) number, if the commodity is sold by number.
11. Licencing of manufacturer, repairer and dealer of Weights and Measures -
(1) Every manufacturer or repairer of, or dealer in, 'veight or measure shall make an application for the issue of a licence to the Controller Legal Metrology or such other officer as may be authorized by him in this behalf, in the appropriate form set out in Schedule II-A.
Provided that no licence to repair shall be required by a manufacturer to repair weight or measure manufactured by him and used in a State other than the State of manufacture of the :)dn12, but the manufacturer has to inform in advance the concerned L.egal Metrology Officer about the repairing.
(2) Every manufacturer or repairer of, or dealer in weight or measure shall make an application for the renewal of a licence within thirty days before the expiry of validity of the licence to the Controller Legal Metrology or such other officer as may be authorized by him in this behalf, in the appropriate form set out in Schedule II-B.
(3) Every licence issued to a manufacturer, repairer or dealer shall be in the appropriate form set out in Schedule III.
(4) Every licence issued to a manufacturer, repairer, or dealer shall be valid for a minimum period of one calendar year and may be renewed for a period of one to five years ,by the Controller or such other officer as may be authorized by him in this behalf on payment of necessary fee as specified in the Schedule IV.
(5) The fee payable for the alteration of a licence or for the issue of a duplicate licence shall be one half of the licence fee as specified in Schedule IV.
Provided that an additional fee at full the rates specified in Schedule IV shall be paya.ble by the applicant if he is permitted by the Controller to make an application for the renewal of a licence within a period of three months from the date of expiry of the licence.
(6) The Controller or such other officer as may be authorized by him in this behalf shall maintain a register of licenced manufacturers, dealers and repairers in the form set out in Schedule V.
(7) Every manufacturer / repairer / dealer licenced under the Act and these Rules shall maintain such workshop / equipments / tools/ registers etc. as the case may be, as per the terms and conditions of the licence.
(8). Every repairer licenced under the Act and these Rules snail furnish a security deposit for each licence to the State Government as specified in Schedule VI. 3 ,
(9) Every license issued or renewed under this Act shall be displayed in a conspicuous place in the premises where the licencee carries on business.
(10) A licence issued or renewed under this Act shall not be saleable nor transferable.
12. Suspension and cancellation of licence granted:
(1) The Controller or such other officer authorized by him in this behalf may, if he has any reasonable cause to believe that the holder of any licence issued, renewed or continued under this Act has made any statement in, or in relation to, any application for the issue, renewal or continuance of the licence, which is incorrect or false in any material particular or has contravened any provision of the Act or any Rules or order made there under, suspend such licence, pending the completion of any inquiry against the holder of such licence:
Provided that no such licence shall be suspended unless the holder thereof has been given a reasonable opportunity of showing cause against the proposed action:
Provided further that where the inquiry referred to in this sub-rule is not completed within a period of three months from the date of suspension of a licence, such suspension shall, on the expiry of the period aforesaid, stand vacated.
(2) The Controller or such other officer authorized by him in this behalf may, if he is satisfied, after making such inquiry as he may think fit, that the holder of a licence has made a false or incorrect statement of the nature referred to in sub-rule (1), or has contravened any law or order referred to in that sub-rule, cancel such licence:
Provided that no such licence shall be cancelled unless the holder thereof has been given a reasonable opportunity of shovving cause against the proposed action.
(3) Every person whose licence has been suspended shail, immediately after such suspension, stop functioning as such licencee and shall not resume business as such licencee until the order of such suspension has been, or stands, vacated.
(4) Every licencee whose licence has been suspended or cancelled shall, after such suspension or cancellation, as the case may be, surrender such licence to the authority by which such licence was issued.
(5) Every licencee whose licence has been cancelled shall, ,vitrin a period of thirty days from the date of such cancellation, or within su'.=h further period, not exceeding three months from such date, as the Controller or such other officer authorized by him in this behalf may, on sufficient cause being shown, allow, dispose of the weights or measures which were in his possession, custody or control on the date of such cancellation and in the event of his failure to do so, the Controller or any other officer authorized by him, in writing, in this behalf, may seize and dispose Of the same and distribute the proceeds thereof in such manner as may be prescribed.
13. Records to be maintained by manufacturers, etc - Every manufacturer or repairer of, or dealer in weight or measure licer,ced under the Act and these Rules shall maintain records and registers in the appropriate form set out in Schedule VII and also submit such periodical report / returns as may be specified.
14. Periodical interval for the verification of weights or measures shall be such as may be prescribed under the Legal Metrology (General) Rules, 2011.
15. Verification and inspection of weights or measures -
(1) Every person using any weight or measure in any transaction or for protection shall present such weight or measure for verification / re verification, at the office of the Legal Metrology Officer or at such other place as the Legal Metrology Officer may specify in this behalf on or before the date on which the verification falls due;
Provided that where any weight or measure is such that it cannot, or should not be moved from its location, the person using such weight or measure shall report to the Legal Metrology Officer at least thirty days in advance of the date on which the verification falls due.
(2) Where any weight or measure is such that it cannot, or should not, be moved from it's location, Legal Metrology Officer shall take necessary steps for the verification of such weight or measure at the place of its location.
(3) For the verification of weight or measure referred to in sub-rule (2) the user shall proVide such facilities as may be specified by the Controller.
(4) Every weight or measure presented for verification shall be complete in itself.
(5) Every weight or measure shall be verified in a clean condition, and if necessary, the Legal Metrology Officer shall require the owner or user to make necessary arrangement for the purpose.
(6) A Legal Metrology Officer may visit, as frequently as possible during the period specified in Rule 14, every premise within the local limits of his jurisdiction to inspect and test any weight or measure which is being or is intended or likely to be used in any transaction or for protection.
(7) The Legal Metrology Officer shall obliterate the stamp on any weight or measure, if it is found during inspection that:-
(a) Any weight or measure which being due for re-verification has not been submitted for such re-verification.
(b) Any weight or measure which does not conform to the Standards established by or under the Act.
Provided that where the Legal Metrology Officer is of opinion that the defect or error in such weight or measure is not such as to require immediate obliteration of the stamp, he shall inform the user, of the defect or error found in the weight or measure and call upon user to remove the defect or error within such time, not exceeding e:ght days and shall-
(i) if user fails to remove the defect or error within that period, obliterate the stamp, or
(ii) if the defect or error is so removed as to make the weight or measure conform to the standards established by or under the Act, verify and stamp such weight or measure.
Explanation: The obliteration of the stamp on any weight or measure shall not take, away or abridge the power of the Legnl Metrology Officer to seize such weight or measure in accordance with the Provisions of the Act.
16. Stamping of weights or measures - (1) The Legal Metrology Officer shall stamp every weight or measure, if after testing and verification, he is satisfied that such weight or measure conforms to the standards established by or under the Act, with a stamp of uniform design, issued by . the Controller, which shall indicate the number allotted for adrninistrative purpose to the Legal Metrology Officer by whom it is stamped.
Provided that if by reason of the size or nature of any weight or measure it is not desirable or practicable to put a stamp thereon, the Legal Metrology Officer shall take such action as may be directecJ by the Controller by a general or a special order in writing.
(2) The Legal Metrology Officer shall also mark the year and its quarter of stamping on every verified weight or measure except when the size or nature of such weight or measure makes it impracticable.
Explanation - A year shall be deemed to consist of four quarters of which first quarter shall be of the months of January, February and March which shall be marked as A; second quarter shall be of the months of April, May and June which shall be marked as 6, third quarter shall be of the months of July, August and September which shall be marked as C and fourth quarter shall be of the months of October, November and December which shall be marked as D.
(3) On completion of verification and stamping the Legal ~1etrology Officer shall issue a certificate of verification in the form set out in Schedule VIII.
(4) Where a certificate of verification is lost or destroyed, the holder of the certificate of verification shall forthwith apply to the Legal Metrology Officer who had issued the certificate, for the issue of a duplicate certificate, of verification. Every such application for the issue of a duplicate certificate shall be accompanied by a fee of rupees ten.
(5) On receipt of an application under sub-rule (4), the Legal Metrology Officer shall issue to the applicant a duplicate copy of the certificate of verification marked 'DUPLICATE'.
17. Fee for verification - (1) Fees payable for verification and stamping of weight or measure at the office or camp office of the Legal Metrology Officer shall be as specified in Schedule IX.
(2) If, at the request of the user of weight or measure, verification is done at any premises other than the office or camp office of the Legal Metrology Officer, an additional fee shall be charged at half the rate specified in the Schedule IX and the user of the v!eight 0:- :;;e3sure shall pay the expenses incurred by the Legal Metrology Officer for visiting the premises including the cost of transporting and handling the Working Standard and other eqUipment subject to a minimum of rupees one hundred.
Provided that no additional fee shall be charged for verification and stamping of weights and measures in situ of,-
(i) vehicle tanks for petroleum products and other liquicls, Meter for Liquids Other than Water (Fuel Dispenser, Liquid Petroleum Gas, Milk Dispensers), Compressed Natural Gas Dispensers, Non-3utomatic Weighing Instruments like weighbridges, platform machines, crane scale, Automatic Gravimetric Filling Instruments, Automatic Rail-weighbridge, Discontinuous Totalizing Automatic Weighing Instruments, and such other weight or measure which cannot, and should not be moved from its location;
(ii) Weight or measure in the premises of manufacturer or oealer of such weight or measure.
(3) If a weight or measure is presented to the Legal Metrology Officer for re-verification after expiry of the validity of the stamp, an additional fee at half the rates specified in Schedule IX shall be payable for every quarter of the year or part thereof.
(4) Full fee shall be payable for re-stamping any weight or r1lea:~ure held in stock with manufacturer or dealer within the period specif:cd, :n rule 14 from the date on which it was last stamped, provided that the original stamp was not obliterated
(5) A weight or measure which on verification/inspection is found to be incorrect shall be returned to the person concerned for adjustment informing him, in a proforma specified by the Controller: of the defects found in the weight or measure, and calling upon him to rel.'ove the defects within a period not exceeding seven days. When the necessary adjustment has been carried out, such weight or measure shall be verified 6 - on payment of the fees specified in schedule IX and if found correct shall be stamped.
18. Collection of fees and deposit into the Treasury - (1) Before commencing the work of verification or re-verification, the Legal Metrology Officer shall inform the person concerned of the fees payable by him and shall receive the same in the manner as authorized by the Controller and issue a receipt on the form approved by the Controller, one copy of such receipt being kept on record.
Provided that fees payable by a department of the Central or State Government under these rules may be realized in such manner as may be directed by the Controller.
(2) The Legal Metrology Officer shall maintain a register, in the form approved by the Controller, which shall be written up from day··to-day and shall show the amount of fees and other charges collected during the day.
(3) All payment received by the Legal Metrology Officer during the week shall be paid into the Government Treasury under the appropriate "Head of Account" on such dates or days as may be specified by the Controller from time to time, and a receipt thereof be obtained and an intimation to that effect be sent to the Controller or other officer authorized by him in this behalf.
19. Disposal of seized weights, measures, etc. -(1) Any un-verified weight or measure shall be returned to the person from whom such weight or measure was seized if that person gets the same verified and stamped, within fifteen days of the return, on payment of the prescribed fee including the additional fee payable for undertaking I'e-verification after the expiry of the validity of the stamp.
(2) Any weight or measure or document or thing or goods seized and detained under sections 15 of the Act, which is to be the sUbject of proceedings in a court shall be produced by the legal metrology officer before the court shall after conclusion of the proceedings, be taken possession of by the legal metrology officer and dealt with in accordance with the orders of the court:
Provided that in the absence of the orders of the court, weight or measure or document or thing or goods shall be dealt with as the Controller may by special order direct and the material thereof shall be sold and the proceeds credited to the relevant head of account of the State Government.
(3) If any goods, seized under sections 15 of the Act. are subject to speedy or natural decay, the legal metrology officer shall have the goods weighed or measured on a verified weighting or measuring instrument available with him or nearest the place of offense and enter the actual weight or measure of the goods in a form specified by the Controller for this purposes, and shall obtain the signature of the trader 01- his agent or such other person who has committed the offence. The goods in question shall be returned to the trader or the purchaser as the case may be:
Provided that if the trader or his agent or the other person (who has committed the offence) refuses to sign the form, the Legal Metrology Officer shall obtain the signature of not less than two persons present at the time of such refusal by the trader or his agent or other person. In the case of goods returned to the traders he shall give an undertaking that he shall not sell the defective goods without rectifying the defects thereon.
(4) Where the goods seized under sub-section (1) of Section 15 of the Act are contained in a package and the package is false or does not conform to the proVisions of the Act or any rules made there under and the goods in such package are subject to speedy or natural decay. the Legal Metrology Officer so far as may be, may dispose of the goods in such package in accordance with the provisions of sub-rule (3). 7
Provided that the Controller shall be the final authority to decide whether the goods seized and detained are subject to speedy or natural decay.
(5) Where the goods seized under sub-section (1) of Section 15 of the Act are not subject to speedy or natural decay, the Legal Metrology Officer may retain the package for the purpose of prosecution under this Act after giving the trader or his agent or the other person (who has committed the offence) a notice of such seizure.
(6) The goods referred under sub-rule (4) &(5) which are not to be the subject of proceedings in. a court, shall after the expiry of sixty days of its seizure, be so dealt with as the Controller may by special order direct.
20. Validity of weights or Measures duly stamped- (1) A weight or measure which is, or is deemed to be, duly verified and stamped under this Rule shall be deemed to conform to the standards established by or under the Act at every place within the State in which it is stamped unless it is found on inspection or verification that such weight or measure has ceased to conform to the standards established by or under the Act.
(2) No weight or measure which is, or is deemed to be, duly verified and stamped under this Act shall require to be re-stamped merely by reason of the fact that it is being used at any place within the State other than the place at which it was originally verified and stamped:
Provided that where a verified weight or measure, installed at one place is dismantled and re-installed at a different place, such weight or measure shall not be put into use unless it has been duly re-verified and stamped, notwithstanding that periodical re-verification of such weight or measure has not become due.
(3) Where a verified weight or measure has been repaired, whether by a licenced repaired or by the person owning and possessing the same, such weight or measure shall not be put into use unless it has been duly re verified and stamped, notwithstanding that periodical re-verification of such weight or measure has not become due.
21. Qualification of Legal Metrology Officer :- The qualification of Legal Metrology Officer as has been specified in Legal Metrology (General) Rules 2011.
22. Provision of supply of Working/Secondary Standards, equipment, etc. to the Legal Metrology Officer - (1) Every Legal Metrology Officer shall be provided with Working /Secondary Standards weights, Working/Secondary Standard balances, and such other equipment including weighing and measuring devices as may be approved by the Controller from time to time.
(2) Every Legal Metrology Officer shall be provided with such dies, punches, paper seal/sticker and such other equipment as may be necessary for affixing the verification stamp, the design and number of which are to be approved by the Controller.
(3) Every Legal Metrology Officer shall be provided with punches of suitable sizes of eight-pointed star as shown below for obliterating stamps.
23. Provisions relating to use of weights measure, etc - (1) Every person using a beam scale in any transactions in his premises shall suspend the same to a stand or to a chain by a hook:
Provided that this sub-rule shall not apply to itinerant vendors.
(2) Every weight or measure shall be used in a clean condition and in proper lighting arrangement 8
(3) Any weight or measure, which has been verified and stamped in situ, shall not be dismantled and removed from its original site without prior intimation to the Controller or other person authorized by him in this behalf.
(4) To ensure a proper check of the accuracy of a weighing instrument the user shall keep at the site of each weighing instrument duly verified and stamped weights equal to one-tenth of the capacity of the instrument or one tonne whichever is less and consumer can also check the accuracy of the weighing instrument.
Provided that the Controller may specify the total number of verified and stamped weights to be maintained in trade premises where the number of weighing instruments are more than one.
(5) To ensure proper delivery of the petrol/diesel pumps, the reteil dealer of the pump shall keep a verified 5 litre/10Iitre/20 litres capacity measure in his premises and check the out put from the pump every day to ensure its correct delivery. In case of any short delivery the dealer shall stop the delivery through the pump immediately and inform the Legal Metrology Officer concerned to recalibrate the pump.
24. Certificate of verification to be exhibited - The person La whom a certificate of verification is issued shall exhibit the same in a conspicuous place in the premises where the weights, measures or weighting or measuring instruments to which the certificate relates are used:
Provided that in the case of itinerant vendor, the certificate shall be kept with the person:
Provided further that in the case of vehicle tank, the certificate of verification shall be kept with the vehicle.
25. Penalty for contravention of rules - Whoever contravenes any provision of these Rules, for the contravention of which no punishment has been separately proVided in the Act, shall be punished with fine, which may extend to five thousand rupees. Whenever Rules are in conflict with the provisions of the Act, the Act will prevail over the Rules.
26. Form of appeal - (1) Every appeal under the Act and these Rules shall be preferred in the form set out in schedule X, and shall be accompanied by a copy of the order appealed against.
(2) An application for appeal to State Government shall be accompanied by fee of Rs. 500 and for appeal to Controller shall be accompanied by fee of Rs. 200 paid either by cash or by affiXing court fee stamp for the said value as the case may be.
27. Fee for compounding of offences- The fee for compOUn2!l1g of offences committed under the Act shall be as prescribed in Schedule XI. (Ram Niwas) Home Secretary, Chandigarh Administration. JOintSe~ For Home Secretary, Chandigarh Administro~lon ~ Endst. NoA/4/21-HII(3)-2011/ /6 if '5/ Dated 1'- /qJJ-t, // A copy alongwith its enclosures is forwarded to the Controller, Printing & Stationery, Union Territory, Chandigarh with the request that the above notification may please be published in the Chandigarh Administration Gazette (Extra Ordinary) and 30 printed copies, thereof, be supplied to this Administration ~ Joint Secretary Finance, For Home Secretary, ~ Chandigarh Administrac.ion. Endst. No.4/4/21-HII(3)-2011/ I{; LtS2-- Dated ~ /2-./ '7 J2.-c J I A copy is forwarded to the Controller, Weights & Measures. Union Terntory, Chandigarh with reference to his memo NO.CWM/ll/619 dated 25.1.2011, fer information and necessary action. 9
SCHEDULE - I (See Rule 10) Exceptions referred to in Rule 10 1- The following commodities may be sold by weight, measure or number as show against the commodity. Table Sr. No.
(1) Commodity
(2) Whether declaration to be expressed in terms of weight, measure or number or two or more of them.
(3) 1- Aerosol products weight 2- Acids in liquid form weight or Volume 3- Compressed or liquefied weight and equivalent volume at stated gas (but not liquefied petroleum gas) temperature and pressure 4- Butter (inc!. peanut butter), weight cheese, curd, ghee S- Electric cables length or weight 6- Electric wire length or weight 7- Fencing wire length or weight 8- Hair oil, un perfumed weight or volume 9- Fruits and vegetables number or weight 10- Furnace oil weight or volume 11- Linseed oil and other weight or volume vegetable oils 12- Heavy residual fuel oil weight 13- Industrial diesel fuel volume 14- Honey, malt extract, golden weight syrup treacle 15- Ice cream and other similar weight or volume frozen products 16- liquid chemicals weight or volume 17- liquid petroleum gas weight 18- Nails, wood screws number or weight 19- Paint (other than paste paints volume or solid paint), varnish and varnish stairs, enamels 20- Papad number and weight 21- Paste paint, solid paint weight 22- Ressogulla, Gulabjamun weight and other sweet preparations 23- Ready made garments number and size 24- Sauce, all kinds weight 25- Tyres and tubes number 26- Yarn Weight or length of yarn --------------------------------------------------------------------------------------------------- 10 ,
SCHEDULE - II "A" [Se rule I I (I)] Form - LM - I [Application form for licence as manufacturer of weights & measures uncleI' the Legal etrology Act, 2009] To,
(1) To be filled by the Applicant
(2) Comments of the inspection officer I.
2. -. J.
4.
5.
6.
7.
8.
9.
10. II.
12. ame of the manufacturing concern for which licence is desired. Complete address of the concem. Whether premises are owned/rented/taken on lease/leave licence. dul) suppOlted by documents. Date of Establ i hment of workshop/factory. Name (s) and address (s) along with their father's/ hu band's name of proprietor (s) and/or Partners and Managing Director ( ) in the case of Limited company The date and current registration number of factory! hop/ establishment! Municipal Trade licence. ature of manufacturing activities at present. The type of weights and measures proposed to be manufactured viz:
(i) Weights
(ii) Mea ures
(iii) Weighing In truments
(iv) Mea uring Instruments with details in each case. The number of persons employed/proposed to be employed
(i) killed
(ii) emi-skilled
(iii) Unskilled
(iv) 'pecialist trained in the line The monogram or trade mark intended to be Imprinted on weights and measures to be manufactured. Details of machinery. tools accessories. owned and used for manufacturing weight measures etc. Details of foundry/workshop facilities arranged. Whether ownersh ip, long term lease etc. Facilitie of steel casting and hardne s testing of ital parts etc or other means.
13. Availability of electric energy.
14. Detai Is of loan received from Government or financial Institution. Ifso, give details.
15. lame of bankers, ifany. 11
16. VAT/ ales Tax Registration lumber/C T I umber Professional Tax registration Number/IT umber.
17. Ha\e you applied previously for a manufactur 1" licence? [fso. when and with ,,;hat result?
18. (a)
(b) © Whether the item ( ) proposed to be manufactured will be sold within the or out side the tate or both. Detail of Model Approval received frol11 Government of India; When can you produce for inspection amples of your products for which licence is desired? To be certified by the applicant (s) Cel1ified that I1We have read the Legal Metrology Act. 2009 and the Chandigarh Legal Metrology (Enforcement) Rules. 20 I I and agree to abide b) the same and also the administrative orders and instructions issued or to be i ued there under. I1We agree to deposit the Scheduled licence fee with Government a soon as I' quired to do so by the Licencing Authority. All the information furnished above is true to the best of my/our knm"'edge. Place: Date: Signature and Designation To be filled in by Departmental Officer of the State Gonrnmenl Date of Receipt of Application: Serial umber of application: Date of inspection: Recommendation of Inspecting Officer: Place: Date: Signature and Designation or !nspeCling Officer Final orders of Licensing Authority Licence granted / refused: Licence umber: Valid till : Place: Date: Signature :lI1d Designation 12 i SCHED LE - IIA [See rule 11 (I)] Form LR-1 [Application for licence as repairers of Weights & Mea ures under the Legal \'letrology Act, 2009] To, To be filled by the applicants 2
1. ame of the concern eeking the licence.
2. Complete addres of the work hop.
3. (a) Whether premises are owned/rented/taken. on lea e dully supported by documents.
(b) Date of establ ishment.
4. Name (s) and address (s) along with their father's/ husband's name of proprietor (s) and/or Partner and Managing Director (s) in the case of Limited company.
5. Number and date ofshop/establishment/culTent Municipal Trade Licence.
6. Professional Ta.' IT Tax I' gistration lumber etc ifan)'.
7. The type of weights and measures propo ed to repaired.
8. Area in which you wi h to operate.
9. Previou experience in the line.
10. lumber of skilled staff employed or proposed to be employed:
(i) Skilled
(ii) emi-skilled
(iii) Unskilled
(iv) Employees trained in the line II. Details of machinery/tools/accessories available.
12. Availability of electric energy.
13. Have you sufficient stock of loan/te t weights. etc.? Give details.
14. Have you applied previously for a repairer's licence? If so, When and with what results') To be certified by the applicant( ) Comments of the inspecting officer Certified that I1We have read the Legal Metrology Act. 2009 and the Chandigarh Legal Metrology (Enforcement) Rules, 20 II and agree to abide b) the :>ame and al 0 the administrative orders and instructions issued or to be issued there under. 13 I/We agree to deposit the Scheduled licence fees with Government as soon as reqUired to do so by the Licensing Authority. All the information furnished above is true to the best of my/our knowledge. Place: Date: Signature and Designation To be filled in by Departmental Officer of the State Government Date of Receipt of Application: Serial Number of application: Date of inspection: Recommendation of Inspecting Officer: Place: Date: Signature and Designation of Inspecting Officer Final orders of Licencing Authority licence granted/refused : licence Number: Valid till: Place: Date: Signature and Designation 14
SCHEDULE - IIA [See rule 11 (l)] Form LD-l [Application Form for Licence as Dealers in Weights & Measures under the Legal Metrology Act, 2009] To, To be filled by the applicant 2 Comments of the inspecting officer 3 I.
2.
3.
4.
5.
6.
7.
8.
(a)
(b)
9. ame of the establ ishment/shop/person seeking the licence. Complete address of the establishment etc. Date of establ ishment. ame (s) and address (s) of proprietors and / or partners .. and Managing Director (s) in the case of Limited company. umber and date of Registration Number of current shop/establishment/Municipal Trade licence. Categories of weights and measures sold/proposed to be sold at present. Registration umber of VAT/CST/Sales Tax/Professional .. Tax/Income Tax. Do you intend to import weights, etc. from places outside the Country? Ifso indicate sources of supply. (Give details of manufacturer's trade mark! monogram and his licence number) and provide Registration ofImporter of Weights and Measures. if an) Approval of model impOlted into India by Central Government. Have you applied previou ly for a dealer's licence. either in this State or elsewhere? Ifso give details? To be certified by the applicant(s) Celtified that l/We have read the Legal Metrology Act. 2009 and the Chandigarh Legal Metrology (Enforcement) Rules, 20 II and agree to abide by the :-.£llllc and also the administrative orders and instructions issued or to be issued there under. l/We agree to deposit the Scheduled licence fees with Government as Sl)On as required to do so by the Licensing Authority. All the information furnished above is true to the best of my/our knowledge. Place: Date: 15 Signatlll;;; and De ignation To be filled in by Departmental Officer of the State Government Date of Receipt of Application: Serial Number of application : Date of inspection : Recommendation of Inspecting Officer: Place: Date: Signature and Designation of Inspecting Officer Final orders of Licensing Authority - licence granted/refused: licence Number: Valid till : Place: Date: Signature and Designation 16
SCHEDULE lIB [See rule 11 (2)1 Form LM-2 [Application for renewal Licence as Manufacturer of Weights & Measures under the Legal Metrology Act, 2009) To, - J.
2.
3.
4.
5.
6.
7.
8.
9. To be filled by the appl icants 2 arne and complete address of the manufacturing concern for which renewal of licence is desired. Manufacturing Licence o. arne (s) and address (s) along with their father's/ husband' name of proprietor (s) and/or Partners and Managing Director (s) in the case of Limited company.
(n) Type of weights and measures which are manufactured as per licence granted.
(b) Do you propose any change. The monogram or trade marks used on weight and mea ure manufactured by you. Details of workshop facilities a ailable. Details of production and sales in the last 5 years. umber and date of shop/establishment Registration umber. Registration I umber of VAT/ ales Ta . CST/Professional Ta' Income Tax. To be certified by the applicant ( ) Comm(;nt~, fthe inspecting officer 3 Certified that l/We have read the Legal Metrology Act. 2009 and the Chancligarh Legal Metrology (Enforcement) Rules, 20 II and agree to abide b) the same and abo tile adlllinistrallve orders and instruction i sued or to be issued there under. I/We have deposited the Scheduled licence fees of Rs (Rupee ....................................... ) to the Sub-Treasury/Bank on and the original challan is enclosed. All the information furnished above i true to the best of my/our knowledge. Place: Date: Signature ancl Designation 17 ,
SCHEDULE lIB [See rule 11 (2)] Form LR-2 [Application for renewal Licence as repairer of Weights & Measures under the Legal Metrology Act 2009] To, 1 To be filled by the applicants 2 Comments of the inspecting officer 3
1.
2.
3.
4.
5.
6.
7.
8.
9. Name and complete address of the repairing concern/ . person seeking renewal of the Licence. Repairer's License Number. Name (s) and address (s) along with their father's/ . husband's name of proprietor (s) and/or Partners and Managing Director (s) in the case of Limited company. Registration Number and date of current shop/ . establishment/Municipal Trade License. Registration Number of VAT/ Sales Tax/CST/Professional .. Tax/Income Tax.
(a) The Type of weights and measures repaired as per license granted.
(b) Do you propose any change. Area in which you are operating. Have you sufficient stock of loan/test weights, etc. "I . Please give details with particulars of stamping. To be certified by the applicant (5) Certified that I/ We have read the Legal Metrology Act, 2009 and the Chandigarh Legal Metrology (Enforcement) Rules, 2011 and agree to abide by the same and also the administrative orders and instructions issued or to be issued there under. I/We have deposited the Scheduled Licence fees of Rs. .. . (Rupees ) to the Sub-Treasury/ Bank on ...................................................... and the original challan is enclosed. All the information furnished above is true to the best of my/our knowledge. Place: Date: Signature and Designation J8
SCHEDULE lIB [See rule 11 (2)] Form LD-2 [Application for renewal Licence as Dealer in Weights & Measures under the Legal Metrology Act 2009] To, 1 To be filled by the applicants 2 Comments of the inspecting officer 3
1.
2.
3.
4.
5.
6.
7.
8. Name of the establishment/shop/person seeking the .. renewal of licence. Dealer's Licence Number. Date of establishment. Name (s) and address (s) along with their father's/ .. husband's name of proprietor (s) and/or Partners and Managing Director (s) in the case of Limited company. Registration Number and date of shop/establishment/ . current Municipal Trade Licence. Categories of weights and measures sold at present. .. Registration Number of VAT/ CST/Sales Tax/Professional .. Tax/Income Tax. Are you intending to import weights and measures etc. from places outside the Country? If so, indicate sources of supply from the State (s)/Country (s). (Give details of manufacturer's trade mark/ monogram and his licence number.) To be certified by the applicant (s) Certified that I/We have the Legal Metrology Act, 2009 and the Chandigarh Legal Metrology (Enforcement) Rules, 2011 and agree to abide by the same and also the administrative orders and instructions issued or to be issued there under. I/We have deposited the Scheduled licence fees of Rs. .. .. (Rupees ) to the Sub-Treasury/Bank on ...................................................... and the original challan is enclosed. All the information furnished above is true to the best of my/our knowledge. Place: Date: Signature end Designation. jC) i
SCHEDULE III [See rule 11 (3)] Licensing Forms FORM LM-3 Chandigarh Administration OFFICE OF THE CONTROLLER OF LEGAL METROLOGY Licence to manufacture, weights, measures, weighing or measuring instruments. Licence No .. Year . 1- The Controller of LegaI Metrology hereby gra nts to . (Name and address of party or parties) a licence to manufacture the following:- (Include details of the weights, measures, weighing instruments or measuring instruments that are licenced to be manufactured by the party). 2- The licence is valid for the party named above in respect of his workshop located at . 3- This licence is valid from to .. 4- 5- The manufacturer shall comply with the conditions noted below. If he fails to comply with anyone of these, his licence is liable to be cancelled. The trade mark monogram being used by the manufacturer is as under. (Signature) Controller of Legal !'1etrology Chandigarh(Seal) Date .. Place 00 Note: In the case of firm, its name with the names of all names of all persons having interest in the business should be given in paragraph 1. Conditions of Licence
1. The person in whose favour this licence is issued shall. -
(a) Comply with all the relevant provisions of the Act and RUles for the time being in force;
(b) Not encourage or countenance any infringement of the provisions of the Act. or the Rules amended from time to time;
(c) Exhibit this licence in some conspicuous part of the premises to which it relates;
(d) Comply with any general or special directions that may be given by the Controller of Legal Metrology;
(e) Surrender the licence in the event of closure of business and/ or cancellation of Licence;
(f) Present the weights, measures, weighing or measuring Instruments as the case may be manufactured and meant for use to the legal n etro:ogy officer for verification and stamping before sale;
(g) Submit the application for renewal of this licence as required under the ruies within thirty days of expiry of the validity of the licence.
2. Every condition prescribed after the issue of this licence shall if notified in the Official Gazette, be binding on the persons to whom the licence has been granted. 20 Renewal entries ~~~::~~~~rqqq·qq Dateqqq ~1~::~~~~rqqqqq Dati U Controller Ll Controller I of Legal Metrology of Legal Metrology Current No Date .. Renewed for Current No Date . Renewed for Controller of Lega I Metrology Controller of Legal Metrology Current No Date . Renewed for I Controller I of Legal Metrology t ---------- Current No Date .. I Renewed for 'E] Controller of Legal Metrology E] 21 Year . Controller c~ ~2;21 f :etroiogy Chand;garh - . ...
SCHEDULE III [See rule 11 (3)J Licencing Forms FORM LR-3 CHANDIGARH ADMINISTRATION OFFICE OF THE CONTROLLER OF LEGAL METROLOGY LICENCE TO REPAIR WEIGHTS, MEASURES, WEIGHING INSTRUMENTS OR MEASURING INSTRUMENTS Licence No . 1- The Controller of Legal Metrology hereby grants to . (Name and address of Party or Parties) a licence to repair the fol!owing:- (Include details of the types of weights, measures, weighing instruments or measuring instruments that are licenced to be repaired by the party) 2- The licence is valid for the party named above in respect of his v'Jorkshop located at . 3- This licence is valid from to . 4- The repairer shall comply with the conditions noted below. If he fails to comply with anyone, his licence is liable to be cancelled. 5- The party is licenced to repair weights, measures, weighing and measuring instruments in the areas mentioned below - (Signaturr) (Seal) Date . Place .
Note: In the case of firm, its name with the names of all persons having any interest in the business should be given in paragraph (1). Conditions of Licence
1. The person in whose favour this licence is issued shall. -
(a) Comply with all the relevant provisions of the Act and Rules for the time being in force;
(b) Not encourage or countenance any infringement of the provisions of the Act or the Rules for the time being in force;
(c) Exhibit this licence in some conspicuous part of the premises to which i[ relates;
(d) Comply with any general or special directions that may be given by the Controller of Legal Metrology;
(e) Surrender the licence in the event of closure of business and/or cancellation of Licence;
(f) (i) Present the weights, measures, weighing or measuring instruments as the case may be duly repaired to the Legal Metrology Officer for under taking verification and stamping as specified in rule 14(1), before delivery to the user.
(ii) In the case of weights, measures weighing or measuring instruments, if they are serviced/repaired before the date on which the verification falls due and where, in the process and the verification stamp of the Legal Metrology Officer is defaced, removed or broken, they shall be presented duly repaired to the Legal Metrology Officer for re-verification and stamping before delivery to the us~r.
(g) Submit the application for renewal of this licence as reqUired under [he rules within ninety days of expiry of the validity of the licence.
2. Every condition prescribed after the issue of this licence shall, if notified in the Official Gazette, be binding on the persons to whom the licence has been granted." 22 Renewal Entries ~~~:~:;~~rH. DateH. ~~~:~:;~~rHH 01 ~ ~ I U Controller U Controller of Legal Metrology of Legal Metrology Current No Date . Renewed for Current No Date .. Renewed for ... Controller of Legal Metrology Controller I of Legal Metrology I Schedule III [See rule 11 (3)] Licencing form FORM LD- 3 CHANDIGARH ADMINISTRATION Office of the Controller of Legal Metrology Licence to a dealer in weights, measures, weighing instruments or measuring instruments Licence No . Year .. -' 1- 2- 3 4- The Controller of Legal Metrology hereby grants to . (Name and address of party or parties) a licence to deal in the following (Indicate details of the types weights and measures, weights, or measuring instruments that are licenced to be dealt with by party) The licence is valid for the party named above in respect of his premises located at This licence is valid from To .. The dealer shall comply with the conditions noted below. If he fails to comply with anyone of those his licence is liable to be cancelled. (Seal) Date . Place . (Signature) Controller of Legal fVletrology Chandigarh Note: In the case of firm its name with the names of all persons haVing any interest in the business should be given in paragraph (1). Conditions of Licence
1. The person in whose favour this licence is issued shall. -
(a) Comply with all the relevant provisions of the Act and Rules for the time being in force;
(b) Not encourage or countenance any infringement of the provisions of the Act. or the Rules for the time being in force;
(c) Exhibit this licence in some conspicuous part of the premises to which it relates;
(d) Comply with any general or special directions that may tJe given by the Controller of Legal Metrology;
(e) Surrender the licence in the event of closure of business and/or cancellation of Licence;
(f) Submit the application for renewal of this licence as required under the rules within ninety days of expiry of the validity of the licence.
(g) Not sellar offer, expose or possess for sale any non-standard weight or measure.
2. Every condition prescribed after the issue of this iicence shall, if notified in the Official Gazette, be binding on the persons to whom the licence has been granted. 24 , . Renewal Entries Current No................. Date .......... ~~~:~:~:~r.dd Date~1 Renewed for EJ M ! Controller I I Controller of Legal Metrology of Legal Metrology Current No................. Date .......... Current No................. Date .......... IRenewed for Renewed for EJ EJ I Controller Controller of Legal Metrology of Legal Metrology I.- ICurrent No................. Date .......... Current No................. Date ......... I I Renewed for Renewed for I EJ EJ I Controller Controller of Legal Metrology of Legal Metrology - 25 - , Schedule - IV [See rule - 11 (4) & (5)] Chandigarh Administration Office of Controller of Legal Metrology Licencing and renewal fees for manufacturers, repairers of dealers of weights and measures Issue of licence / renewal of licence to:
(i) Manufacturers
(ii) Repairers
(iii) Dealers 26 Rs. 500/- per year Rs. 100/- per year Rs. 100/- per year Schedule-V [See rule 11 (6)] Chandigarh Administration Office of Controller of Legal Metrology Register of licenced manufacturers/ Repairers/ Dealers of weights, measures, weighing / measuring instruments Office of . Licence Date of Name and Place Articles Trade Orders Result Signature IRemark INumber issue/ complete where to be mark/ regarding I of of renewal address of the workshop manufact monogra cancellation appeal GJmpete manufacturer / factory ured/ m being of licence '1t I /repalrer/ IS repalred/ used authorty dealer situated sold I 1 2 3 4 5 6 7 I 8 9' 1 10 I Note: Column (4) does not apply to dealers, column (6) does not apply to repairers and dealers. Schedule VI [See rule 11(8)] Chandigarh Administration Office of Controller of Legal Metrology Security deposit to be made by licensed repairer Repairer of weights and measures including weighing and measuring instruments. 27 RS.200.00 Name and address of the repairer . Licence No... ...... .... Schedule - VII [See rule 13] Register to be maintained by the manufacturers of weights and measurers. 1- Name and address of the manufacturer .. 2- Description of the weight or measure .. 3- (i) No. of the manufacturing licence ..
(ii) Date on which the licence was issued .
(iii)Period of validity of the licence .. 4- Particulars of order, if any, suspending or revoking . the licence. S.No. Month Unsold Quantity Total Sold within the stock manufactured 3+4 state from during the previous month No. of I Dispatch month item I voucher sold i no. and I date 1 2 3 4 5 6 7 , 1 ._- .-- Sold outside the Dispatch Total sold Balance Remar~') voucher I (5-11) I Name of No. of (6+9) I no. and I the state items date ! sold 8 9 10 11 12 13 I ~ ! 28 Schedule - VII [See rule 13] Form LR-4 Register to be maintained by the repairer in respect of weights, Measures Name and address of the repairer.. Licence No . Date of Licensing .. S. No. Date Name of the user Items and their Nos. Receipt No. and from whom received booked for repair date of issue to the user 1 2 3 4 5 I I Amount of Amount of Total amount Date of return Remarks repairing verification fee charged I to the user Icharqes I 6 7 8 9 I 10!-r- --- Schedule - VII [See rule 13] LD-4 Register to be maintained by dealer in weights and measures. 1- Name and address of the dealer . 2- Description of the weight or measure .. 3- (i) Dealer licence No, ..
(ii) Date on which the licence was issued ..
(iii) Period of validity of licence . 4- Particulars of order, if any suspending or .. Revoking the licence. 5- Category of weight or measure , (Category A or B) Sr. No. Month Unsold stock Brought from Brought from I Total I from the within the during outside the , (3+4+5)I previous the month during the I II I I I month I month I • _______0- --- 1 2 3 4 5 ~I , .. ISold within the state Sold outside the state Total sold I Balance Remerks I No. of Dispatch No. of Dispatch Name of (7+9) I I (6-12)items sold voucher items sold voucher the state I I no. and No. and 13~--1-4-~ I date date I 7 8 9 10 11 12 -I ._._-.-- ---I I I 29 - , Schedule - VIII [See rule 16 (3)] Chandigarh Administration Office of the Controller, Legal Metrology, Certificate of verification Name of Legal No . Metrology Officer I hereby certify that I have this day verified and stamped / rejected the under mentioned weights, measurers, etc. Belonging to Locality .. 2uantity Denomination Weighing instruments Measuring instruments Weights Measures Capacity Class I Manufacturer I Type: I.. I I-. 1 2 3 4 5 6 7 I 8 I .._-- I .__._- - Verification I Carriage, Fee I conveyance I adjusting Rs. p hc arges etc. 9 10 Total Rs deposited vide T. Receipt/ Money receipt .No dated .. Repaired by/ Used by ............................ (Signature) Next verification due on . Legal Metrology Officer Note:- In the case of rejected weights, measures, etc the legal metrology officer shall give separate Certificate of rejection mentioning the reasons of rejection against each item. 30 , Schedule-IX [See-Rule 14 (1)] Fee payable for verification and Stamping of Weights and Measures and Weighing and Measuring Instruments 1- (a) Bullion Weights: Denomination Fee per piece (Rs.)
(1) (2) 10 Kg. 30.00 5 Kg. 20.00 2 Kg. 20.00 I I 1 Kg. 20.00 500 g. 15.00 200 g. 15.00 100 g. 15.00 50 g. --------
15.00 20 g. 15.00 I -=j10 g. 15.00 5 g. 15.00 ---------J 2 g. ; 15_00 I 19 I 15.00
(b) Carat Weights: I I - - --------< _I
20.0010mg (0.05 c) -------------------- --------- 4mg (0.02c) 20.00 r--__~2~m-g_____;(--=-0_:_.0_::_1-C):___----------20-.0~-----------~ "--- lm_g _(0_.0_0_5_C) 20.00 ~ 100g (500 c) --
20.00 40g (200 c) -
20.00 20g (100 c) 20.00 109 (50 c) 20.00 4g (20 c) ---
20.00 2g (10 c) -
20.00 19 (5 c) 20.00 400mg (2 c) I 20.00 I 200mg (1 c) 20.00 100mg (0.5 c) -
20.00 40mg (0.02 c) 20.00 20mg (0.01 c) 20.00 i ----- - - 31 ,
(c) Cylindrical knob type weights: Denomination I Fee per piece (Rs.) I
(1) (2) 10 Kg. 20.00 5 Kg. 20.00 2 Kg. 15.00 1 Kg. 10.00 - 500 g. 5.00 200 g. 5.00 100 g. 5.00 I I 50 g. 5.00 I -- --, 20 g. 5.00 I I._-_., 10 g. 5.00 -- I 5 g. 5.00 I ! 2 g. 5.00 -=~ ..- 19 5.00
(d) Sheet metal Weight (other than Bullion) Denomination I Fee per piece (Rs.)
(1) GL I 500 mg. 5.00 --~ 200 mg. 5.00 I 100 mg. 5.00 ~-350 mg. 5.00 20 mg. 5.00 --- ! 10 mg. 5.00 I I 5 mg. 5.00 ~2 mg. 5.00 1 mg. 5.00
(e) Iron hexagonal, knob type weights and parallelepiped weights: I ==3 Denomination Fee per piece (Rs.) ~(1) (2) 50 Kg. 25.00 ! -- 20 Kg. 20.00 10 Kg. I 20.00 I I - -- 5 Kg. 20.00 I ...._ ..__.- 2 Kg. I 15.00 - 1 Kg. 10.00 ! 500 g. 5.00 200 g. 5.00 - 100 g. 5.00 I - " 50 g. 5.00 20g 5.00 i lag 5.00 5g 5.00 2g 5.00 19 5.00
(e) Standard weights for testing of high capacity weighing machines: Denominations Fee corresponding to Fee corresponding to Max permissible relative Max permissible relative error 0.5/10000 in Rs. error 3.3/10000,
1.7/10000 and 1.0/10000 I in Rs. I i 100kg 75.00 50.00 I 200kg 150.00 100.00 I I500kg 300.00 200.00 1000kg 750.00 500.00 I 2000kg 1500.00 10°°,85000kg i 3000.00 2000.00 2- Capacity Measures: Denomination Fee per piece (Rs.) I I
(1) (2) I I100 litre and above Rs. 50 for the 1st 100 litre plt.is Rs. 7 for every additional 100 litre or part thereof subject to maximum Of~
5000. 50 I 50.00 20 I I 20.00 1 i._- I10 I 20.00 51 10.00 I21 10.00 1 I 10.00 500 ml 10.00 --------- 200 ml I 10.00 I _._--- --- lOa ml 10.00 t - I 10.00 ---------150 ml I ---- - - I 20 ml I 10.00 I I I- I10 ml 10.00 I5 ml 10.00 2 ml 10.00 --- 1 ml 10.00 -- I 33 3- Length Measures:
(a) Non-Flexible - Denomination I Fee per piece (Rs.) I
(1) I (2) 2 m. 10.00 1 m. 10.00 , ----
0.5 m. 20.00 . _._- - - -- =31 m. graduated (at every cm) 20.00
0.5 m. graduated (at every cm) 20.00
(b) Fabric Plastic/ Woven/Steel tapes - Accuracy Class Fee per metre in Rs.
(1) --- Class-I 1.00 ------ C1ass-II 1.00 Class-III 0.50 ------.J
(c) Folding Scales- Denomination Fee per piece (Rs.)
(1) I (2) I .- ._----_._-~ 1 m. --+ 10.00I II I ----
0.5 m. 10.00 _...---------, --.J I____... ___ ...__J
(d) Surveying Chain - Denomination Fee per piece (Rs.) I
(1) (2) I -- I 30 m. 100.00 I I 20 m. 100.00 ._--~ 4- Beam Scale Class A & B: Denomination Fee per piece (Rs.Y--i
(1) (2) ~ 200 kg. 400.00 --- laO kg. 300.00 " 50 kg. 150.00 --- --- 20 kg. 150.00 ,...---- --- --_._- 10 kg. 150.00 5 kg. 100.00 --- 2 kg. 100.00 --'- 1 kg. 100.00 500 g and below 60.00 ---- 34 - 5- Beam Scales Class C& 0: Denomination Fee per piece (Rs.)
(1) (2) 1000 kg. 200.00 ----_.- 500 kg 200.00 ----- 300 kg 200.00 200 kg 100.00 100 kg 100.00 50 kg 20.00 20 kg 20.00 10 kg 20.00 I5 kg 15.00 - 2 kg 15.00 1 kg 15.00 500 g and below 10.00 ._--- 6- Non-Automatic Weighing Instruments - Mechanical (analogue) Class III & IIII : -- -----~ 400 t 4000.00 300 t 3000.00 - -- ----j I I 200t 3000.00 _._-_.._-----, I--- 150 t 2000.00 I 100 t 2000.00 --~ i 80 t 2000.00 --:=j60 t 2000.00 50 t 2000.00 I 40 t 2000.00 ~30 t 2000.00 25 t 2000.00 20 t 2000.00 ----~ 15 t 2000.00 I----- . I10 t 1000.00 5 t 500.00 I-_.- ---~ 3 t 400.00 -- - --I 2 t 400.00 1500 kg 300.00 ~~ 1000 kg 300.00 500 kg 300.00 300 kg 200.00 -- 250 kg 200.00 - ---=1200 kg 100.00 150 kg ! 100.00 I 100 kg I 100.00 I i SO kg i tao.OO I i - 30 kg 100.00 -------- _. - - I 25 kg 60.00 I ---_._-- -- I 35 - 20 kg 60.00 I I15 kg I
30.00 -- - i 10 kg 30.00 -----~ 5 kg 30.00 I- 3 kg 30.00 I 2 kg 30.00 --=31 kg 15.00 500 g. and below 15.00 - -~_._- 7- Non-Automatic Weighing Instruments - Electronic Class III & IIII : 400 t 4000.00 I 300 t 3000.00 200t 3000.00 150 t 2000.00 100 t 2000.00 i --- 80 t I
2000.00 .-----1 60 t i
2000.00 i --~ 5C ~ 2000.00 i ,.- -------, 40 t 2000.00 I30 t I 2000.00 I _·_--_·-1 25 t 2000.00 20 t 2CQO.OO ------I I 15 t 2000.00 ----~10 t 1000.00 -r - I 5 t 1000.00 ~3 t 500.00 2 t 500.00 ---~1500 kg 250.00 1000 kg ----
250.00 500 kg 250.00 I -- I300 kg 200.00 - I250 kg I 200.00 f-_. - ._-- 200 kg 200.00 ---- - . ----- 150 kg ! 200.00 - 100 kg 200.00 ._- -- 50 kg 200.00 30 kg 200.00 25 kg 200.00 20 kg 100.00 15 kg 100.00 10 kg 100.00 5 kg --
100.00 3 kg 100.00 2 kg 100.00 1 kg 100.00 500 g. and below 100.00 --- --- 36 8- Not Automatic Weighing instruments both mechanical and electronics class I & II: ~ Capacity Fee (Rs.) i Exceeding 50 t 3000.00 ! Not exceed 50t but exceed lOt 2000.00 --j Not exceed lOt but exceed 1t 1000.00 Not exceed 1t but exceed 50kg 500.00 Not exceed 50kg but exceed 10kg 250.00 '~ Not exceed 10kg 200.00 - a.Automatic Weighing Instrument: Capacity i Fee in Rs. I Exceeding 100 t I 4000.00 i I ----~ Not exceeding lOOt but exceeding 50t 3000.00 I Not exceeding 50t but exceeding lOt 2000.UO ----- --'I I I I _.. _- Not exceeding lOt but exceeding 1t 1000.00 i ------ Not exceeding 1t but exceeding 50kg 500.00 I I i Not exceeding 50kg but exceeding 10kg 250.00 ------, Not exceeding 10kg 200.00 ----j I 9- Volumetric measuring instruments:
(a)
(b)
(c) Dispensing pumps each pump Totalizing counter Other instruments Rs.1000.00 per unit Rs. 500.00 per unit ,--,-,----- rs plus Rs. 250 ers or part thereof s,Capacity I Fee in R - 1Rs. 500 for the 1st 100 TiteExceeding 100 litre for every additional 100 lit Not exceeding 100 litre but exceeding 50 I 500.00 litre Not exceeding 50 litre but exceeding 20 250.00 litre Not exceed 20 litre 200.00 10- Flow meters: Flow rate up to 100 litre/ min. Above 100 litre/ min upto 500 litre/ min Above 500 litre Imino Rs.2000.00 RS.3000.00 RS.5000.00 11- Linear Measuring Instruments: Taxi, Autorishaw meters Other meters Rs.100.00 RS.50 for the 1st lOOO ~. or part there of Plus Rs. 5.00 for every additional 100 m. or part thereof 12- Clinical Thermometer 13- Water meter Rs. 0.50 per un!' Rs. 25.00 per unit 37 14- Peg Measure: 0_____ 30 ml 50.00 - 60 ml 50.00 100 ml 50.00 -
15. CNG Dispensers:
16. LPG Dispensers:
17. Verification of Weigh-bridge with mobile kit:
18. (i) Counter machine up to capacity 10kg :
(ii) Counter machine above capacity 10kg : Schedule -x [See rule 25(1)J Rs. 1000.00 per unit Rs. 1000.00 per unit Rs. 3000.00 per unit RS.30.00 per unit RS.50.00 per unit Form of appeal against an order of a Legal Metrology Officer/ Controller Legal Metrology:- 1- Name and address of the appellant 2- No. and date of order of Legal Metrology Officer/ Controller of Legal Metrology against which the appeal is preferred. 3- Whether the appellant desires to be heard in person 0:- through an authorized representative. 4- Grounds of appeal 38 Schedule -XI [See rule 27] Minimum Compounding sum for various offences Sr. No. Section and nature of offence I Penal Section I Sum of Compounding fine/amount S. 8(4) Manufacture of weight or 27 I measure not conforminq to Standards 1 2 S. 8(3) Use of weight, measure or I numeration other than the Standard weiqht, measure or numeration 25 Rs.2500.00 Rs.2000.00 Rs.1000.00
4.
3.
6.
5.
9. S. 10 Transaction or dealing or 28 II contract in respect of goods etc , by weight , measure or number than I II I prescribed. _ S. 11 Quote or make announcement 29 i Rs.1000.00 I or issue or exhibit of price list or I changing of price than in accordance I 1 with standard unit of weight or I measure or numeration. I I S. 12 Demanding or receiving any 30 I -- -Rs.10-00.00 I articles or thing on service in excess I I or less than the quantity specified by I I contract or agreement. 1--------: I S. 17 Maintenance of records, I 31 r- Rs.500.00 registers by manufacturer, dealer or ' , I repairer and production of weight, I measure document, register on demand r---7-.-I-S-.-1-8(-1-)-C-o-m'-p-Ii-a-nc-e-o-f-d-ec-Id--r-a-ti-on-in-r:--3-6-(-1)----... - respect of pre-packaged commodity I by manufacturer/ dealer I f----8-.--!--'S:...L.--=1"-8':'':'''':'(l--')--=C=-=o:...::.cm':"":'p-=-li-'--a--=nc':'::'e='='of'--ne-t-q-u-a-nt-ity--+----3-6-(2-)--+-1-~-s.-1--50--0-0-.0-0--' requirement of pre-packaged I I commodity by manufacturer I S. 23 Manufacturer of weight or 45 r- Rs.5000.00 I f--__~m~e=-=a:..::s-=u.:....:re=--=-on:..:.:i1...L.....:..Vw..:...:i..:::.th..:....:..:..lic=..:e:..:..n:..::c-=e----_+------___._1 1
10. S. 23 Repair/ sale of weight or I 46 I Rs.2000.00 I I--__-f-m_e:...:,a.....::.s_u_re=---.:...on--='I..L.-'-yw--=i.:..:.th--=--=Iic.:....:.e--=n.....::.c...=.e --+ -1-1.._.. __. 1
11. S. 24 Use of verified weight or 33 IRs. 5000.00 I I--__-f-m--=e:...:,a.....::.s.:..:.u--=re::.....--=in--=t:.:..,ra:.:..,n--=s.:....:.a.:....:.c.:..:.ti.::::...on:..--=.:c0..:....r..c..:....Plro=..:t:..=e...=.ct:.:..,io::..:.n--=--=-+-- I-'I-- I
12. S.33 Sale of weight or measure 33 Rs.5000.00 without verification ____I Rs. 500.00 RS.2500.00'1 ·R5~-500.ooj Rs.5QOO.00 I 35 34 47 53(3) , 5.35 Rendering service by non-standard -1 weiqht or measure I 5,47 Tamperinq with licence
5.34 Sale or delivery of commodities by I non-standards weiqhts or measure
14.
15.
16.
13. S. 53(3) Provision of any rule made under I fueAct 1L- ...c....::.=...:-=:. ---l _ 39