(1) Any person aggrieved by an order of suspension or cancellation or refusal of authorisation or its renewal passed by the State Pollution Control Board may, within a period of thirty days from the date on which the order is communicated to him, prefer an appeal in Form 12 to the Appellate Authority, namely, the Environment Secretary of the State.
(2) The Appellate Authority may entertain the appeal after expiry of the said period of thirty days, if it is satisfied that the appellant was prevented by sufficient cause from filing the appeal in time.
(3) Every appeal filed under this rule shall be disposed of within a period of sixty days from the date of its filing.
SCHEDULE I [See rule 3 (1) (17) (i)] List of processes generating hazardous wastes S.No. Processes Hazardous Waste*
(1) (2) (3)
1. Petrochemical processes and pyrolytic operations
1.1 Furnace or reactor residue and debris
1.2 Tarry residues and still bottoms from distillation
1.3 Oily sludge emulsion
1.4 Organic residues
1.5 Residues from alkali wash of fuels 16
(1) (2) (3)
1.6 Spent catalyst and molecular sieves
1.7 Oil from wastewater treatment
2. Crude oil and natural gas production
2.1 Drill cuttings excluding those from water based mud
2.2 Sludge containing oil
2.3 Drilling mud containing oil
3. Cleaning, emptying and maintenance of petroleum oil storage tanks including ships
3.1 cargo residue, washing water and sludge containing oil
3.2 cargo residue and sludge containing chemicals
3.3 Sludge and filters contaminated with oil
3.4 Ballast water containing oil from ships
4. Petroleum refining or reprocessing of used oil or recycling of waste oil
4.1 Oil sludge or emulsion
4.2 Spent catalyst
4.3 Slop oil
4.4 Organic residue from processes
4.5 Spent clay containing oil
5. Industrial operations using mineral or synthetic oil as lubricant in hydraulic systems or other applications
5.1 Used or spent oil
5.2 Wastes or residues containing oil
5.3 Waste cutting oils
6. Secondary production and / or industrial use of zinc
6.1 Sludge and filter press cake arising out of production of Zinc Sulphate and other Zinc Compounds.
6.2 Zinc fines or dust or ash or skimmings in dispersible form
6.3 Other residues from processing of zinc ash or skimmings
6.4 Flue gas dust and other particulates
7. Primary production of zinc or lead or copper and other non-ferrous metals except aluminium
7.1 Flue gas dust from roasting
7.2 Process residues
7.3 Arsenic-bearing sludge
7.4 Non-ferrous metal bearing sludge and residue.
7.5 Sludge from scrubbers
8. Secondary production of copper 8.1 Spent electrolytic solutions
8.2 Sludge and filter cakes
8.3 Flue gas dust and other particulates
9. Secondary production of lead 9.1 Lead bearing residues
9.2 Lead ash or particulate from flue gas
9.3 Acid from used batteries
10. Production and/or industrial use of cadmium and arsenic and their compounds
10.1 Residues containing cadmium and arsenic
11. Production of primary and secondary aluminum
11.1 Sludges from off-gas treatment
11.2 Cathode residues including pot lining wastes
11.3 Tar containing wastes
11.4 Flue gas dust and other particulates
11.5 Drosses and waste from treatment of salt sludge 17
(1) (2) (3)
11.6 Used anode butts
11.7 Vanadium sludge from alumina refineries
12. Metal surface treatment, such as etching, staining, polishing, galvanizing, cleaning, degreasing, plating, etc.
12.1 Acidic and alkaline residues
12.2 Spent acid and alkali
12.3 Spent bath and sludge containing sulphide, cyanide and toxic metals
12.4 Sludge from bath containing organic solvents
12.5 Phosphate sludge
12.6 Sludge from staining bath
12.7 Copper etching residues
12.8 Plating metal sludge
13. Production of iron and steel including other ferrous alloys (electric furnace; steel rolling and finishing mills; Coke oven and by products plant)
13.1 Spent pickling liquor
13.2 Sludge from acid recovery unit
13.3 Benzol acid sludge
13.4 Decanter tank tar sludge
13.5 Tar storage tank residue
13.6 Residues from coke oven by product plant.
14. Hardening of steel 14.1 Cyanide-, nitrate-, or nitrite -containing sludge
14.2 Spent hardening salt
15. Production of asbestos or asbestos-containing materials
15.1 Asbestos-containing residues
15.2 Discarded asbestos
15.3 Dust or particulates from exhaust gas treatment.
16. Production of caustic soda and chlorine
16.1 Mercury bearing sludge generated from mercury cell process
16.2 Residue or sludges and filter cakes
16.3 Brine sludge
17. Production of mineral acids 17.1 Process acidic residue, filter cake, dust
17.2 Spent catalyst
18. Production of nitrogenous and complex fertilizers
18.1 Spent catalyst
18.2 Carbon residue
18.3 Sludge or residue containing arsenic
18.4 Chromium sludge from water cooling tower
19. Production of phenol 19.1 Residue or sludge containing phenol
19.2 Spent catalyst
20. Production and/or industrial use of solvents
20.1 Contaminated aromatic, aliphatic or napthenic solvents may or may not be fit for reuse.
20.2 Spent solvents
20.3 Distillation residues
20.4 Process Sludge
21. Production and/or industrial use of paints, pigments, lacquers, varnishes and inks
21.1 Process wastes, residues and sludges
21.2 Spent solvent
22. Production of plastics 22.1 Spent catalysts
22.2 Process residues
23. Production and /or industrial use of glues, organic cements,
23.1 Wastes or residues (not made with vegetable or animal materials) 18
(1) (2) (3) adhesive and resins 23.2 Spent solvents
24. Production of canvas and textiles 24.1 Chemical residues
25. Industrial production and formulation of wood preservatives
25.1 Chemical residues
25.2 Residues from wood alkali bath
26. Production or industrial use of synthetic dyes, dye-intermediates and pigments
26.1 Process waste sludge/residues containing acid, toxic metals, organic compounds
26.2 Dust from air filtration system
26.3 Spent acid
26.4 Spent solvent
26.5 Spent catalyst
27. Production of organic-silicone compound
27.1 Process residues
28. Production/formulation of drugs/pharmaceutical and health care product
28.1 Process Residue and wastes
28.2 Spent catalyst
28.3 Spent carbon
28.4 Off specification products
28.5 Date-expired products
28.6 Spent solvents
29. Production, and formulation of pesticides including stock-piles
29.1 Process wastes or residues
29.2 Sludge containing residual pesticides
29.3 Date-expired and off-specification pesticides
29.4 Spent solvents
29.5 Spent catalysts
29.6 Spent acids
30. Leather tanneries 30.1 Chromium bearing residue and sludge
31. Electronic Industry 31.1 Process residue and wastes
31.2 Spent etching chemicals and solvents
32. Pulp and Paper Industry 32.1 Spent chemicals
32.2 Corrosive wastes arising from use of strong acid and bases
32.3 Process sludge containing adsorbable organic halides(AOX)
33. Handling of hazardous chemicals and wastes
33.1 Empty barrels/containers/liners contaminated with hazardous chemicals /wastes
33.2 Contaminated cotton rags or other cleaning materials
34. De-contamination of barrels / containers used for handling of hazardous wastes/chemicals
34.1 Chemical-containing residue arising from decontamination.
34.2 Sludge from treatment of waste water arising out of cleaning / disposal of barrels / containers
35. Purification and treatment of exhaust air/gases, water and waste water from the processes in this schedule and common industrial effluent treatment plants (CETP’s)
35.1 Exhaust Air or Gas cleaning residue
35.2 Spent ion exchange resin containing toxic metals
35.3 Chemical sludge from waste water treatment
35.4 Oil and grease skimming
35.5 Chromium sludge from cooling water
36. Purification process for organic 36.1 Any process or distillation residue 19
(1) (2) (3) compounds/solvents 36.2 Spent carbon or filter medium
37. Hazardous waste treatment processes, e.g. pre-processing, incineration and concentration
37.1 Sludge from wet scrubbers
37.2 Ash from incinerator and flue gas cleaning residue
37.3 Concentration or evaporation residues
38. Chemical processing of Ores containing heavy metals such as Chromium, Manganese, Nickel, Cadmium etc.
38.1 Process residues
38.2 Spent acid * The inclusion of wastes contained in this Schedule does not preclude the use of Schedule II to demonstrate that the waste is not hazardous. In case of dispute, the matter would be referred to the Technical Review Committee constituted by Ministry of Environment, Forest and Climate Change.
Note: The high volume low effect wastes such as fly ash, Phosphogypsum, red mud, jarosite, Slags from pyrometallurgical operations, mine tailings and ore beneficiation rejects are excluded from the category of hazardous wastes. Separate guidelines on the management of these wastes shall be issued by Central Pollution Control Board.
20
SCHEDULE II [See rule 3 (1) (17) (ii)] List of waste constituents with concentration limits Class A: Based on leachable concentration limits [Toxicity Characteristic Leaching Procedure (TCLP) or Soluble Threshold Limit Concentration (STLC)] Class Constituents Concentration in mg/l
(1) (2) (3) A1 Arsenic 5.0 A2 Barium 100.0 A3 Cadmium 1.0 A4 Chromium and/or Chromium (III) compounds
5.0 A5 Lead 5.0 A6 Manganese 10.0 A7 Mercury 0.2 A8 Selenium 1.0 A9 Silver 5.0 A10 Ammonia 50* A11 Cyanide 20* A12 Nitrate (as nitrate-nitrogen) 1000.0 A13 Sulphide (as H2S) 5.0 A14 1,1-Dichloroethylene 0.7 A15 1,2-Dichloroethane 0.5 A16 1,4-Dichlorobenzene 7.5 A17 2,4,5-Trichlorophenol 400.0 A18 2,4,6-Trichlorophenol 2.0 A19 2,4-Dinitrotoluene 0.13 A20 Benzene 0.5 A21 Benzo (a) Pyrene 0.001 A22 Bromodicholromethane 6.0 A23 Bromoform 10.0 A24 Carbon tetrachloride 0.5 A25 Chlorobenzene 100.0 A26 Chloroform 6.0 A27 Cresol (ortho+ meta+ para) 200.0 A28 Dibromochloromethane 10.0 A29 Hexachlorobenzene 0.13 A30 Hexachlorobutadiene 0.5 A31 Hexachloroethane 3.0 A32 Methyl ethyl ketone 200.0 A33 Naphthalene 5.0 A34 Nitrobenzene 2.0 A35 Pentachlorophenol 100.0 A36 Pyridine 5.0 A37 Tetrachloroethylene 0.7 A38 Trichloroethylene 0.5 21
(1) (2) (3) A39 Vinyl chloride 0.2 A40 2,4,5-TP (Silvex) 1.0 A41 2,4-Dichlorophenoxyacetic acid 10.0 A42 Alachlor 2.0 A43 Alpha HCH 0.001 A44 Atrazine 0.2 A45 Beta HCH 0.004 A46 Butachlor 12.5 A47 Chlordane 0.03 A48 Chlorpyriphos 9.0 A49 Delta HCH 0.004 A50 Endosulfan (alpha+ beta+ sulphate) 0.04 A51 Endrin 0.02 A52 Ethion 0.3 A53 Heptachlor (& its Epoxide) 0.008 A54 Isoproturon 0.9 A55 Lindane 0.4 A56 Malathion 19 A57 Methoxychlor 10 A58 Methyl parathion 0.7 A59 Monocrotophos 0.1 A60 Phorate 0.2 A61 Toxaphene 0.5 A62 Antimony 15 A63 Beryllium 0.75 A64 Chromium (VI) 5.0 A65 Cobalt 80.0 A66 Copper 25.0 A67 Molybdenum 350 A68 Nickel 20.0 A69 Thallium 7.0 A70 Vanadium 24.0 A71 Zinc 250 A72 Fluoride 180.0 A73 Aldrin 0.14 A74 Dichlorodiphenyltrichloroethane (DDT), Dichlorodiphenyldichloroethylene (DDE), Dichlorodiphenyldichloroethane (DDD)
0.1 A75 Dieldrin 0.8 A76 Kepone 2.1 A77 Mirex 2.1 A78 Polychlorinated biphenyls 5.0 A79 Dioxin (2,3,7,8-TCDD) 0.001 22 Class B: Based on Total Threshold Limit Concentration (TTLC) Class Constituent Concentration in mg/kg
(1) (2) (3) B1 Asbestos 10000 B2 Total Petroleum Hydrocarbons (TPH) (C5 - C36) 5,000 Note:
(1) The testing method for list of constituents at A1 to A61 in Class-A, shall be based on Toxicity Characteristic Leaching Procedure (TCLP) and for extraction of leachable constituents, USEPA Test Method 1311 shall be used.
(2) The testing method for list of constituents at A62 to A79 in Class- A, shall be based on Soluble Threshold Limit Concentration (STLC) and Waste Extraction Test (WET) Procedure given in Appendix II of section 66261 of Title 22 of California Code regulation (CCR) shall be used.
(3) In case of ammonia (A10), cyanide (A11) and chromium VI (A64), extractions shall be conducted using distilled water in place of the leaching media specified in the TCLP/STLC procedures.
(4) A summary of above specified leaching/extraction procedures is included in manual for characterization and analysis of hazardous waste published by Central Pollution Control Board and in case the method is not covered in the said manual, suitable reference method may be adopted for the measurement.
(5) In case of asbestos, the specified concentration limits apply only if the substances are in a friable, powdered or finely divided state.
(6) The hazardous constituents to be analyzed in the waste shall be relevant to the nature of the industry and the materials used in the process.
(7) Wastes which contain any of the constituents listed below shall be considered as hazardous, provided they exhibit the characteristics listed in Class-C of this Schedule :
1. Acid Amides
2. Acid anhydrides
3. Amines
4. Anthracene
5. Aromatic compounds other than those listed in Class A
6. Bromates, (hypo-bromites)
7. Chlorates (hypo-chlorites)
8. Carbonyls
9. Ferro-silicate and alloys
10. Halogen- containing compounds which produce acidic vapours on contact with humid air or water e.g. silicon tetrachloride, aluminum chloride, titanium tetrachloride
11. Halogen- silanes
12. Halogenated Aliphatic Compounds
13. Hydrazine (s) 23
14. Hydrides
15. Inorganic Acids
16. Inorganic Peroxides
17. Inorganic Tin Compounds
18. Iodates
19. (Iso- and thio-) Cyanates
20. Manganese-silicate
21. Mercaptans
22. Metal Carbonyls
23. Metal hydrogen sulphates
24. Nitrides
25. Nitriles
26. Organic azo and azooxy Compounds
27. Organic Peroxides
28. Organic Oxygen Compounds
29. Organic Sulphur Compounds
30. Organo- Tin Compounds
31. Organo nitro- and nitroso compounds
32. Oxides and hydroxides except those of hydrogen, carbon, silicon, iron, aluminum, titanium, manganese, magnesium, calcium
33. Phenanthrene
34. Phenolic Compounds
35. Phosphate compounds except phosphates of aluminum, calcium and iron
36. Salts of pre-acids
37. Total Sulphur
38. Tungsten Compounds
39. Tellurium and tellurium compounds
40. White and Red Phosphorus
41. 2-Acetylaminofluorene
42. 4-Aminodiphenyl
43. Benzidine and its salts
44. Bis (Chloromethyl) ether
45. Methyl chloromethyl ether
46. 1,2-Dibromo-3-chloropropane
47. 3,3'-Dichlorobenzidine and its salts
48. 4-Dimethylaminoazobenzene
49. 4-Nitrobiphenyl
50. Beta-Propiolactone CLASS C : Based on hazardous Characteristics Apart from the concentration limit given above, the substances or wastes shall be classified as hazardous waste if it exhibits any of the following characteristics due to the presence of any hazardous constituents:
24 Class C1: Flammable- A waste exhibits the characteristic of flammability or ignitability if a representative sample of the waste has any of the following properties, namely:-
(i) flammable liquids, or mixture of liquids, or liquids containing solids in solution or suspension (for example, paints, varnishes, lacquers, etc; but not including substances or wastes otherwise classified on account of their dangerous characteristics), which give off a flammable vapour at temperature less than 60°C.
This flash point shall be measured as per ASTM D 93-79 closed-cup test method or as determined by an equivalent test method published by Central Pollution Control Board;
(ii) it is not a liquid and is capable, under standard temperature and pressure, of causing fire through friction, absorption of moisture or spontaneous chemical changes and, when ignited, burns vigorously and persistently creating a hazard;
(iii) it is an ignitable compressed gas;
(iv) It is an oxidizer and for the purposes of characterisation is a substance such as a chlorate, permanganate, inorganic peroxide, or a nitrate, that yields oxygen readily to stimulate the combustion of organic matter.
Class C2: Corrosive- A waste exhibits the characteristic of corrosivity if a representative sample of the waste has either of the following properties, namely:-
(i) it is aqueous and has a pH less than or equal to 2 or greater than or equal to 12.5;
(ii) it is a liquid and corrodes steel (SAE 1020) at a rate greater than 6.35 mm per year at a test temperature of 55 °C;
(iii) it is not aqueous and, when mixed with an equivalent weight of water, produces a solution having a pH less than or equal to 2 or greater than or equal to 12.5;
(iv) it is not a liquid and, when mixed with an equivalent weight of water, produces a liquid that corrodes steel (SAE1020) at a rate greater than 6.35 mm per year at a test temperature of 55 °C.
Note:
For the purpose of determining the corrosivity, the Bureau of Indian Standard 9040 C method for pH determination, NACE TM 01 69 : Laboratory Corrosion Testing of Metals and EPA 1110A method for corrosivity towards steel (SAE1020) to establish the corrosivity characteristics shall be adopted.
Class C3: Reactive or explosive- A waste exhibits the characteristic of reactivity if a representative sample of the waste it has any of the following properties, namely:-
(i) it is normally unstable and readily undergoes violent change without detonating;
(ii) it reacts violently with water or forms potentially explosive mixtures with water;
(iii) when mixed with water, it generates toxic gases, vapours or fumes in a quantity sufficient to present a danger to human health or the environment;
(iv) it is a cyanide or sulphide bearing waste which, when exposed to pH conditions between 2 and 12.5, can generate toxic gases, vapours or fumes in a quantity sufficient to present a danger to human health or the environmental;
(v) it is capable of detonation or explosive reaction if it is subjected to a strong initiating source or if heated under confinement;
(vi) it is readily capable of detonation or explosive decomposition or reaction at standard temperature and pressure;
(vii) it is a forbidden explosive.
25 Class C4: Toxic- A waste exhibits the characteristic of toxicity, if, :-
(i) the concentration of the waste constituents listed in Class A and B (of this schedule) are equal to or more than the permissible limits prescribed therein;
(ii) it has an acute oral LD50 less than 2,500 milligrams per kilogram;
(iii) it has an acute dermal LD50 less than 4,300 milligrams per kilogram;
(iv) it has an acute inhalation LC50 less than 10,000 parts per million as a gas or vapour;
(v) it has acute aquatic toxicity with 50% mortality within 96 hours for zebra fish (Brachidanio rerio) at a concentration of 500 milligrams per litre in dilution water and test conditions as specified in BIS test method 6582 – 2001.
(vi) it has been shown through experience or by any standard reference test- method to pose a hazard to human health or environment because of its carcinogenicity, mutagenecity, endocrine disruptivity, acute toxicity, chronic toxicity, bio-accumulative properties or persistence in the environment.
Class C5: Substances or Wastes liable to spontaneous combustion - Substances or Wastes which are liable to spontaneous heating under normal conditions encountered in transport, or to heating up on contact with air, and being then liable to catch fire.
Class C6: Substances or Wastes which, in contact with water emit flammable gases- Substances or Wastes which, by interaction with water, are liable to become spontaneously flammable or to give off flammable gases in dangerous quantities.
Class C5: Oxidizing - Substances or Wastes which, while in themselves not necessarily combustible, may, generally by yielding oxygen cause, or contribute to, the combustion of other materials.
Class C8: Organic Peroxides - Organic substances or Wastes which contain the bivalent O−O structure, which may undergo exothermic self-accelerating decomposition.
Class C9: Poisons (acute) - Substances or Wastes liable either to cause death or serious injury or to harm human health if swallowed or inhaled or by skin contact.
Class C10: Infectious substances - Substances or Wastes containing viable micro-organisms or their toxins which are known or suspected to cause disease in animals or humans.
Class C11: Liberation of toxic gases in contact with air or water - Substances or Wastes which, by interaction with air or water, are liable to give off toxic gases in dangerous quantities.
Class C12: Eco-toxic- Substances or Wastes which if released, present or may present immediate or delayed adverse impacts to the environment by means of bioaccumulation or toxic effects upon biotic systems or both.
Class C13: Capable, by any means, after disposal, of yielding another material, e.g., leachate, which possesses any of the characteristics listed above.
26
SCHEDULE III [See rules 3 (1) (17) (iii), 3 (23), 12, 13 and 14] Part A List of hazardous wastes applicable for import and export with Prior Informed Consent [Annexure VIII of the Basel Convention*] Basel No. Description of Hazardous Wastes
(1) (2) A1 Metal and Metal bearing wastes A1010 Metal wastes and waste consisting of alloys of any of the following but excluding such wastes specifically listed in Part B and Part D - Antimony - Cadmium - Lead - Tellurium A1020 Waste having as constituents or contaminants, excluding metal wastes in massive form, any or the following:
- Antimony, antimony compounds - Cadmium, cadmium compounds - Lead, lead compounds - Tellurium, tellurium compounds A1040 Waste having metal carbonyls as constituents A1050 Galvanic sludges A1070 Leaching residues from zinc processing, dust and sludges such as jarosite, hematite, etc.
A1080 Waste zinc residues not included in Part B, containing lead and cadmium in concentrations sufficient to exhibit hazard characteristics indicated in Part C A1090 Ashes from the incineration of insulated copper wire A1100 Dusts and residues from gas cleaning systems of copper smelters A1120 Waste sludges, excluding anode slimes, from electrolyte purification systems in copper electrorefining and electrowinning operations A1140 Waste cupric chloride and copper cyanide catalysts not in liquid form note the related entry in Schedule VI A1150 Precious metal ash from incineration of printed circuit boards not included in Part B A1160 Waste lead acid batteries, whole or crushed A1170 Unsorted waste batteries excluding mixtures of only Part B batteries. Waste batteries not specified in Part B containing constituents mentioned in Schedule II to an extent to render them hazardous A2 Wastes containing principally inorganic constituents, which may contain metals and organic materials A2010 Glass waste from cathode-ray tubes and other activated glasses A2030 Waste catalysts but excluding such wastes specified in Part B A3 Wastes containing principally organic constituents, which may contain metals and inorganic materials A3010 Waste from the production or processing of petroleum coke and bitumen A3020 Waste mineral oils unfit for their originally intended use A3050 Wastes from production, formulation and use of resins, latex, plasticizers, glues or adhesives excluding such wastes specified in Part B (B4020) A3120 Fluff-light fraction from shredding 27
(1) (2) A3130 Waste organic phosphorus compounds A4 Wastes which may contain either inorganic or organic constituents A4010 Wastes from the production, preparation and use of pharmaceutical products but excluding such waste specified in Part B A4040 Wastes from the manufacture, formulation and use of wood-preserving chemicals (does not include wood treated with wood preserving chemicals) A4070 Waste from the production, formulation and use of inks, dyes, pigments, paints, lacquers, varnish excluding those specified in Part B (B4010) A4100 Wastes from industrial pollution control devices for cleaning of industrial offgases but excluding such wastes specified in Part B A4120 Wastes that contain, consist of or are contaminated with peroxides.
A4130 Wastes packages and containers containing Schedule II constituents in concentration sufficient to exhibit Part C of Schedule III hazard characteristics.
A4140 Waste consisting of or containing off specification or outdated chemicals (unused within the period recommended by the manufacturer) corresponding to constituents mentioned in Schedule II and exhibiting Part C of Schedule III hazard characteristics.
A4160 Spent activated carbon not included in Part B, B2060 *This List is based on Annexure VIII of the Basel Convention on Transboundary Movement of Hazardous Wastes and comprises of wastes characterized as hazardous under Article I, paragraph 1(a) of the Convention. Inclusion of wastes on this list does not preclude the use of hazard.
Characteristics given in Annexure VIII of the Basel Convention (Part C of this Schedule) to demonstrate that the wastes are not hazardous. Hazardous wastes in Part-A are restricted and cannot be allowed to be imported without permission from the Ministry of Environment, Forest and Climate Change and the Directorate General of Foreign Trade license, if applicable.
Part B List of other wastes applicable for import and export and not requiring Prior Informed Consent [Annex IX of the Basel Convention*] Basel No. Description of wastes
(1) (2) B1 Metal and metal-bearing wastes B1010 Metal and metal-alloy wastes in metallic, non-dispersible form:
- Thorium scrap - Rare earths scrap B1020 Clean, uncontaminated metal scrap, including alloys, in bulk finished form (sheet, plates, beams, rods, etc.), of:
- Antimony scrap - Beryllium scrap - Cadmium scrap - - - Lead scrap (excluding lead acid batteries) - Selenium scrap - Tellurium scrap B1030 Refractory metals containing residues 28
(1) (2) B1031 Molybdenum, tungsten, titanium, tantalum, niobium and rhenium metal and metal alloy wastes in metallic dispersible form (metal powder), excluding such wastes as specified in Part A under entry A1050, Galvanic sludges B1040 Scrap assemblies from electrical power generation not contaminated with lubricating oil, PCB or PCT to an extent to render them hazardous B1050 Mixed non-ferrous metal, heavy fraction scrap, containing cadmium, antimony, lead & tellurium mentioned in Schedule II in concentrations sufficient to exhibit Part C characteristics B1060 Waste selenium and tellurium in metallic elemental form including powder B1070 Waste of copper and copper alloys in dispersible form, unless they contain any of the constituents mentioned in Schedule II to an extent that they exhibit Part C characteristics B1080 Zinc ash and residues including zinc alloys residues in dispersible form unless they contain any of the constituents mentioned in Schedule II in concentration such as to exhibit Part C characteristics B1090 Waste batteries conforming to a standard battery specification, excluding those made with lead, cadmium or mercury B1100 Metal bearing wastes arising from melting, smelting and refining of metals:
- Slags from copper processing for further processing or refining containing arsenic, lead or cadmium - Slags from precious metals processing for further refining - Wastes of refractory linings, including crucibles, originating from copper smelting - Tantalum-bearing tin slags with less than 0.5% tin B1110 Used Electrical and electronic assemblies other than those listed in Part D of Schedule III Electronic assemblies consisting only of metals or alloys Waste electrical and electronic assemblies or scrap (including printed circuit boards) not containing components such as accumulators and other batteries included in Part A of Schedule III, mercury-switches, glass from cathode-ray tubes and other activated glass and PCB-capacitors, or not contaminated with Schedule II constituents such as cadmium, mercury, lead, polychlorinated biphenyl) or from which these have been removed, to an extent that they do not possess any of the characteristics contained in Part C of Schedule III (note the related entry in Schedule VI, A1180) B1120 Spent catalysts excluding liquids used as catalysts, containing any of:
Transition metals, excluding waste catalysts (spent catalysts, liquid used catalysts or other catalysts) in Part A and Schedule VI:
- Scandium - Titanium - Vanadium - Chromium - Manganese - Iron - Cobalt - Nickel - Copper - Zinc - Yttrium - Zirconium - Niobium - Molybdenum - Hafnium - Tantalum 29
(1) (2) - Tungsten - Rhenium Lanthanides (rare earth metals):
- Lanthanum - Cerium - Praseodymium - Neodymium - Samarium - Europium - Gadolinium - Terbium - Dysprosium - Holmium - Erbium - Thulium - Ytterbium - Lutetium B1130 Cleaned spent precious metal bearing catalysts B1140 Precious metal bearing residues in solid form which contain traces of inorganic cyanides B1150 Precious metals and alloy wastes (gold , silver, the platinum group but not mercury) in a dispersible form, non-liquid form with appropriate packaging and labelling B1160 Precious metal ash from the incineration of printed circuit boards (note the related entry in Part A A1150) B1170 Precious metal ash from the incineration of photographic film B1180 Waste photographic film containing silver halides and metallic silver B1190 Waste photographic paper containing silver halides and metallic silver B1200 Granulated slag arising from the manufacture of iron and steel B1210 Slag arising from the manufacture of iron and steel including slags as a source of Titanium dioxide and Vanadium B1220 Slag from zinc production, chemically stabilised, having a high iron content (above 20%) and processed according to industrial specifications mainly for construction B1230 Mill scale arising from the manufacture of iron and steel B1240 Copper Oxide mill-scale B2 Wastes containing principally inorganic constituents, which may contain metals and organic materials B2010 Wastes from mining operations in non-dispersible form:
- Natural graphite waste - Slate wastes - Mica wastes - Leucite, nepheline and nepheline syenite waste - Feldspar waste - Fluorspar waste - Silica wastes in solid form excluding those used in foundry operations B2020 Glass wastes in non-dispersible form:
- Cullet and other waste and scrap of glass except for glass from cathode-ray tubes and other activated glasses B2030 Ceramic wastes in non-dispersible form:
- Cermet wastes and scrap (metal ceramic composites) - Ceramic based fibres B2040 Other wastes containing principally inorganic constituents:
- Partially refined calcium sulphate produced from flue gas desulphurization (FGD) - Waste gypsum wallboard or plasterboard arising from the demolition of buildings 30
(1) (2) - Slag from copper production, chemically stabilized, having a high iron content (above 20%) and processed according to industrial specifications mainly for construction and abrasive applications - Sulphur in solid form - Limestone from production of calcium cyanamide (pH<9) - Sodium, potassium, calcium chlorides - Carborundum (silicon carbide) - Broken concrete - Lithium-tantalum and lithium-niobium containing glass scraps B2060 Spent activated carbon not containing any of Schedule II constituents to the extent they exhibit Part C characteristics, for example, carbon resulting from the treatment of potable water and processes of the food industry and vitamin production (note the related entry in Part A A4160) B2070 Calcium fluoride sludge B2080 Waste gypsum arising from chemical industry processes not included in Schedule VI (note the related entry in A2040) B2090 Waste anode butts from steel or aluminium production made of petroleum coke or bitumen and cleaned to normal industry specifications (excluding anode butts from chlor alkali electrolyses and from metallurgical industry) B2100 Waste hydrates of aluminium and waste alumina and residues from alumina production, excluding such materials used for gas cleaning, flocculation or filtration processes B2130 Bituminous material (asphalt waste) from road construction and maintenance, not containing tar (note the related entry in Schedule VI, A3200) B3 Wastes containing principally organic constituents, which may contain metals and inorganic materials B3027 Self-adhesive label laminate waste containing raw materials used in label material production B3030 Textile wastes The following materials, provided they are not mixed with other wastes and are prepared to a specification:
- Silk waste (including cocoons unsuitable for reeling, yarn waste and garnetted stock) • not carded or combed • other - Waste of wool or of fine or coarse animal hair, including yarn waste but excluding garnetted stock • noils of wool or of fine animal hair • other waste of wool or of fine animal hair • waste of coarse animal hair - Cotton waste (including yarn waste and garnetted stock) • yarn waste (including thread waste) • garnetted stock • other - Flax tow and waste - Tow and waste (including yarn waste and garnetted stock) of true hemp (Cannabis sativa L.)
- Tow and waste (including yarn waste and garnetted stock) of jute and other textile bast fibres (excluding flax, true hemp and ramie) - Tow and waste (including yarn waste and garnetted stock) of sisal 31
(1) (2) and other textile fibres of the genus Agave - Tow, noils and waste (including yarn waste and garneted stock) of coconut - Tow, noils and waste (including yarn waste and garneted stock) of abaca (Manila hemp or Musa textilis Nee) - Tow, noils and waste (including yarn waste and garneted stock) of ramie and other vegetable textile fibres, not elsewhere specified or included - Waste (including noils, yarn waste and garnetted stock) of manmade fibres • of synthetic fibres • of artificial fibres - Worn clothing and other worn textile articles - Used rags, scrap twine, cordage, rope and cables and worn out articles of twine, cordage, rope or cables of textile materials • sorted • other B3035 Waste textile floor coverings, carpets B3040 Rubber Wastes The following materials, provided they are not mixed with other wastes:
- Waste and scrap of hard rubber (e.g., ebonite) - Other rubber wastes (excluding such wastes specified elsewhere) B3050 Untreated cork and wood waste:
- Wood waste and scrap, whether or not agglomerated in logs, briquettes, pellets or similar forms - Cork waste: crushed, granulated or ground cork B3060 Wastes arising from agro-food industries provided it is not infectious:
- Wine lees - Dried and sterilized vegetable waste, residues and by-products, whether or not in the form of pellets, of a kind used in animal feeding, not elsewhere specified or included - Degras: residues resulting from the treatment of fatty substances or animal or vegetable waxes - Waste of bones and horn-cores, unworked, defatted, simply prepared (but not cut to shape), treated with acid or degelatinised - Fish waste - Cocoa shells, husks, skins and other cocoa waste - Other wastes from the agro-food industry excluding by-products which meet national and international requirements and standards for human or animal consumption B3070 The following wastes:
- Waste of human hair - Waste straw - Deactivated fungus mycelium from penicillin production to be used as animal feed B3080 Waste parings and scrap of rubber B3090 Paring and other wastes of leather or of composition leather not suitable for the manufacture of leather articles, excluding leather sludges, not containing hexavalent chromium compounds and biocides (note the related entry in Schedule VI, A3100) 32
(1) (2) B3100 Leather dust, ash, sludges or flours not containing hexavalent chromium compounds or biocides (note the related entry in Schedule VI, A3090) B3110 Fellmongery wastes not containing hexavalent chromium compounds or biocides or infectious substances (note the related entry in Schedule VI, A3110) B3120 Wastes consisting of food dyes B3130 Waste polymer ethers and waste non-hazardous monomer ethers incapable of forming peroxides B3140 Waste pneumatic and other tyres, excluding those which do not lead to resource recovery, recycling, reclamation but not for direct reuse B4 Wastes which may contain either inorganic or organic constituents B4010 Wastes consisting mainly of water-based or latex paints, inks and hardened varnishes not containing organic solvents, heavy metals or biocides to an extent to render them hazardous (note the related entry in Part A, A4070) B4020 Wastes from production, formulation and use of resins, latex, plasticizers, glues or adhesives, not listed in Part A, free of solvents and other contaminants to an extent that they do not exhibit Part C characteristics (note the related entry in Part A, A3050) B4030 Used single-use cameras, with batteries not included in Part A * This list is based on Annexure IX of the Basel Convention on Transboundary Movement of Hazardous Wastes and comprises of wastes not characterized as hazardous under Article-I of the Basel Convention. The wastes in Part- B are restricted and cannot be allowed to be imported without permission from the Ministry of Environment, Forest and Climate Change and the Directorate General of Foreign Trade license, if applicable.
Note:
(1) Copper dross containing copper greater than 65% and lead and Cadmium equal to or less than 1.25% and 0.1% respectively; spent cleaned metal catalyst containing copper; and copper reverts, cake and residues containing lead and cadmium equal to or less than 1.25% and 0.1% respectively are allowed for import without Director General of Foreign Trade license to units (actual users) authorised by State Pollution Control Board and with the Ministry of Environment, Forest and Climate Change’s permission. Copper reverts, cake and residues containing lead and cadmium greater than 1.25% and 0.1% respectively are under restricted category for which import is permitted only against Director General of Foreign Trade license for the purpose of processing or reuse by units permitted with the Ministry of Environment, Forest and Climate Change (actual users).
(2) Zinc ash or skimmings in dispersible form containing zinc more than 65% and lead and cadmium equal to or less than 1.25% and 0.1% respectively and spent cleaned metal catalyst containing zinc are allowed for import without Director General of Foreign Trade license to units authorised by State Pollution control Board, Ministry of Environment, Forest and Climate Change’s permission (actual users) upto an annual quantity limit indicated in registration letter. Zinc ash and skimmings containing less than 65% zinc and lead and cadmium equal to or more than 1.25% and 0.1% respectively and hard zinc spelter and brass dross containing lead greater than 1.25% are under restricted category for which import is permitted against Director General of Foreign Trade license and only for purpose of processing or reuse by units registered with the Ministry of Environment Forest and Climate Change (actual users).
33 Part C List of Hazardous Characteristics Code Characteristic H 1 Explosive An explosive substance or waste is a solid or liquid substance or waste (or mixture of substances or wastes) which is in itself capable by chemical reaction of producing gas at such a temperature and pressure and at such a speed as to cause damage to the surrounding.
H 3 Flammable liquids The word “flammable” has the same meaning as “inflammable”. Flammable liquids are liquids, or mixtures of liquids, or liquids containing solids in solution or suspension (for example, paints, varnishes, lacquers, etc. but not including substances or wastes otherwise classified on account of their dangerous characteristics) which give off a flammable vapour at temperatures of not more than 60.5ºC, closed-cup test, or not more than 65.6ºC, open-cup test. (Since the results of open-cups tests and of closed-cup tests are not strictly comparable and even individual results by the same test are often variable, regulations varying from the above figures to make allowance for such differences would be within the spirit of this definition).
H 4.1 Flammable solids Solids, or waste solids, other than those classed as explosives, which under conditions encountered in transport are readily combustible, or may cause or contribute to fire through friction.
H 4.2 Substances or wastes liable to spontaneous combustion Substances or wastes which are liable to spontaneous heating under normal conditions encountered in transport, or to heating up on contact with air, and being then liable to catch fire.
H 4.3 Substances or wastes which, in contact with water emit flammable gases Substances or wastes which, by interaction with water, are liable to become spontaneously flammable or to give off flammable gases in dangerous quantities.
H 5.1 Oxidizing Substances or wastes which, while in themselves not necessarily combustible, may, generally by yielding oxygen cause, or contribute to, the combustion or other materials.
H 5.2 Organic Peroxides Organic substances or wastes which contain the bivalent-o-o-structure are thermally unstable substances which may undergo exothermic self-accelerating decomposition.
34 H 6.1 Poisons (acute) Substances or wastes liable either to cause death or serious injury or to harm human health if swallowed or inhaled or by skin contact.
H 6.2 Infectious substances Substances or wastes containing viable micro-organisms or their toxins which are known or suspected to cause disease in animals or humans.
H 8 Corrosives Substances or wastes which, by chemical action, will cause severe damage when in contact with living tissue, or, in the case of leakage, will materially damage, or even destroy, other goods or the means of transport; they may also cause other hazards.
H 10 Liberation of toxic gases in contact with air or water Substances or wastes which, by interaction with air or water, are liable to give off toxic gases in dangerous quantities.
H 11 Toxic (delayed or chronic) Substances or wastes which, if they are inhaled or ingested or if they penetrate the skin, may involve delayed or chronic effects, including carcinogenicity).
H 12 Eco-toxic Substances or wastes which if released, present or may present immediate or delayed adverse impacts to the environment by means of bioaccumulation or toxic effects upon biotic systems or both.
H 13 Capable, by any means, after disposal, of yielding another material, e.g., leachate, which possesses any of the characteristics listed above.
35 Part D List of other wastes applicable for import and export without permission from Ministry of Environment, Forest and Climate Change [Annex IX of the Basel Convention*] Basel No. Description of wastes
(1) (2) B1 Metal and metal-bearing wastes B1010 Metal and metal-alloy wastes in metallic, non-dispersible form :
- Precious metals (gold, silver, platinum but not mercury) * * - Iron and steel scrap * * - Nickel scrap * * - Aluminium scrap* * - Zinc scrap * * - Tin scrap * * - Tungsten scrap * * - Molybdenum scrap * * - Tantalum scrap * * - Cobalt scrap * * - Bismuth scrap * * - Titanium scrap * * - Zirconium scrap * * - Manganese scrap * * - Germanium scrap * * - Vanadium scrap * * - Hafnium scrap * * - Indium scrap * * - Niobium scrap * * - Rhenium scrap * * - Gallium scrap * * - Magnesium scrap * * - Copper scrap * * - Chromium scrap * * B1050 Mixed non-ferrous metal, heavy fraction scrap, containing metals other than specified in Part B1050 and not containing constituents mentioned in Schedule II in concentrations sufficient to exhibit Part C characteristics* * B1100 Metal bearing wastes arising from melting, smelting and refining of metals:
- Hard Zinc spelter * * - Zinc-containing drosses * *:
~ Galvanizing slab zinc top dross (>90% Zn) ~ Galvanizing slab zinc bottom dross (>92% Zn) ~ Zinc die casting dross (>85% Zn) ~ Hot dip galvanizers slab zinc dross (batch) (>92% Zn) ~ Zinc skimmings Aluminium skimmings (or skims) excluding salt slag 36
(1) (2) B1110 Electrical and electronic assemblies (including printed circuit boards, electronic components and wires) destined for direct reuse and not for recycling or final disposal - Used electrical and electronic assemblies imported for repair and to be reexported back after repair within one year of import * * * - Used electrical and electronic assemblies imported for rental purpose and re-exported back within one year of import * * * - Used electrical and electronic assemblies exported for repair and to be reimport after repair - Used electrical and electronic assemblies imported for testing, research and development, project work purposes and to be re-exported back within a period of three years from the date of import * * * - Spares imported for warranty replacements provided equal number of defective or non-functional parts are exported back within one year of the import * * * - Used electrical and electronic assemblies imported by Ministry of Defence, Department of Space and Department of Atomic Energy * * * - Used electrical and electronic assemblies (not in bulk; quantity less than or equal to three) imported by the individuals for their personal uses - Used Laptop, Personal Computers, Mobile, Tablet up to 01 number each imported by organisations in a year - Used electrical and electronic assemblies owned by individuals and imported on transfer of residence - Used multifunction print and copying machines (MFDs)* * * * - Used electrical and electronic assemblies imported by airlines for aircraft maintenance and remaining either on board or under the custodianship of the respective airlines warehouses located on the airside of the custom bonded areas.
B3 Wastes containing principally organic constituents, which may contain metals and inorganic materials B3020 Paper, paperboard and paper product wastes * * The following materials, provided they are not mixed with hazardous wastes:
Waste and scrap of paper or paperboard of:
- unbleached paper or paperboard or of corrugated paper or paperboard - other paper or paperboard, made mainly of bleached chemical pulp, not coloured in the mass - paper or paperboard made mainly of mechanical pulp (for example newspapers, journals and similar printed matter) - other, including but not limited to
(1) laminated paperboard
(2) unsorted scrap B3140 Aircraft Tyres exported to Original Equipment Manufacturers for re-treading and re-imported after re-treading by airlines for aircraft maintenance and remaining either on board or under the custodianship of the respective airlines warehouses located on the airside of the custom bonded areas Note:
* This list is based on Annexure IX of the Basel Convention on Transboundary Movement of Hazardous Wastes and comprises of wastes not characterized as hazardous under Article-I of the Basel Convention.
37 * * Import permitted in the country to the actual user or to the trader on behalf of the actual users authorised by SPCB on one time basis and subject to verification of documents specified in Schedule VIII of these rules by the Custom Authority.
* * * Import permitted in the country only to the actual users from Original Equipment Manufacturers (OEM) and subject to verification of documents specified in Schedule VIII of these rules by the Custom Authority.
* * * * Import permitted in the country to the actual users or trader on behalf of the actual user in accordance with the documents required and verified by the Custom Authority as specified under Schedule VIII of these rules. The policy for free trade for multifunction print and copying machine to be reviewed once the MFDs are domestically manufactured.
All other wastes listed in Part D of Schedule III having no “Stars” are permitted without any documents from MoEF&CC subject to compliance of the conditions of the Customs Authority, if any.
SCHEDULE IV [See rules 6 (1) (ii) and 6 (2)] List of commonly recyclable hazardous wastes S.No. Wastes
(1) (2)
1. Brass Dross
2. Copper Dross
3. Copper Oxide mill scale
4. Copper reverts, cake and residue
5. Waste Copper and copper alloys in dispersible from
6. Slags from copper processing for further processing or refining
7. Insulated Copper Wire Scrap or copper with PVC sheathing including ISRI-code material namely “Druid”
8. Jelly filled Copper cables
9. Spent cleared metal catalyst containing copper
10. Spent catalyst containing nickel, cadmium, Zinc, copper, arsenic, vanadium and cobalt
11. Zinc Dross-Hot dip Galvanizers SLAB
12. Zinc Dross-Bottom Dross
13. Zinc ash/Skimmings arising from galvanizing and die casting operations
14. Zinc ash/Skimming/other zinc bearing wastes arising from smelting and refining
15. Zinc ash and residues including zinc alloy residues in dispersible from
16. Spent cleared metal catalyst containing zinc
17. Used Lead acid battery including grid plates and other lead scrap/ashes/residues not covered under Batteries (Management and Handling) Rules, 2001.
[Battery scrap, namely: Lead battery plates covered by ISRI, Code word “Rails” Battery lugs covered by ISRI, Code word “Rakes”. Scrap drained/dry while intact, lead batteries covered by ISRI, Code word “rains”.
38
(1) (2)
18. Components of waste electrical and electronic assembles comprising accumulators and other batteries included in Part A of Schedule III, mercuryswitches, activated glass cullets from cathode-ray tubes and other activated glass and PCB-capacitors, or any other component contaminated with Schedule II constituents (e.g. cadmium, mercury, lead, polychlorinated biphenyl) to an extent that they exhibit hazard characteristics indicated in part C of Schedule III.
19. Paint and ink Sludge/residues
20. Used oil and waste oil
SCHEDULE V [See rules 3 (36) and 3 (39)]
PART A Specifications of Used Oil Suitable for recycling S.No. Parameter Maximum permissible Limits
(1) (2) (3)
1. Polychlorinated biphenyls (PCBs) < 2ppm *
2. Lead 100 ppm
3. Arsenic 5 ppm
4. Cadmium+Chromium+Nickel 500 ppm
5. Polyaromatic hydrocarbons (PAH) 6% Part B Specification of fuel derived from waste oil S.No. Parameter Maximum permissible limits
(1) (2) (3)
1. Sediment 0.25%
2. Lead 100 ppm
3. Arsenic 5 ppm
4. Cadmium+Chromium+Nickel 500 ppm
5. Polyaromatic hydrocarbons (PAH) 6%
6. Total halogents 4000 ppm
7. Polychlorinated biphenyls (PCBs) <2 ppm *
8. Sulfur 4.5%
9. Water Content 1% *The detection limit is 2 ppm by gas Liquid Chromatography (GLC) using Electron Capture detector (ECD) 39
SCHEDULE VI [See rules 12 (6), 12 (7) and 14(1)] Hazardous and Other wastes prohibited for import Basel No Description of hazardous and other wastes
(1) (2) A1 Metal and Metal bearing wastes A1010 Metal wastes and waste consisting of alloys of any of the following but excluding such wastes specifically listed in Part B and Part D of Schedule III - Arsenic - Beryllium - Mercury - Selenium - Thallium A1020 Wastes having as constituents or contaminants, excluding metal wastes in massive form, any of the following:
- Beryllium; beryllium compounds - Selenium; selenium compounds A1030 Wastes having as constituents or contaminants any of the following:
- Arsenic; arsenic compounds - Mercury; mercury compounds - Thallium; thallium compounds A1040 Waste having hexavalent chromium compounds as constituents A1140 Waste cupric chloride and copper cyanide catalysts in liquid form (note the related entry in Part A of Schedule III) A1060 Wastes liquors from the pickling of metals A1110 Spent electrolytic solutions from copper electrorefining and electrowinning operations A1130 Spent etching solutions containing dissolved copper A1180 Waste electrical and electronic assembles or scrap (does not include scrap assemblies from electric power generation) containing components such as accumulators and other batteries included in Part A of Schedule III, mercuryswitches, glass from cathode-ray tubes and other activated glass and PCB- capacitors, or contaminated with Schedule II constituents (e.g. cadmium, mercury, lead, polychlorinated biphenyl) to an extent that they exhibit hazard characteristics indicated in Part C of Schedule III (note the related entry in Part B B1110) A1190 Waste metal cables coated or insulated with plastics containing or contaminated with coal tar, PCB, lead, cadmium, other organohalogen compounds or other constituents as mentioned in Schedule II to the extent that they exhibit hazard characteristics indicated in Part C of Schedule III A2 Wastes containing principally inorganic constituents, which may contain metals and organic materials A2020 Waste inorganic fluorine compounds in the form of liquids or sludges but excluding such wastes specified in Part B 40
(1) (2) A2040 Waste gypsum arising from chemical industry processes, if it contains any of the constituents mentioned in Schedule 2 to the extent that they exhibit hazard characteristics indicated in Part C of Schedule III (note the related entry in Part B B2080) A2050 Waste asbestos (dusts and fibres) A2060 Coal-fired power plant fly-ash containing Schedule II constituents in concentrations sufficient to exhibit Part C characteristics A3 Wastes containing principally organic constituents, which may contain metals and inorganic materials A3030 Wastes that contain, consist of or are contaminated with leaded anti-knock compounds sludges.
A3040 Waste thermal (heat transfer) fluids A3060 Waste nitrocellulose A3070 Waste phenols, phenol compounds including chlorophenol in the form of liquids or sludges A3080 Waste ethers not including those specified in Part B A3090 Waste leather dust, ash, sludges and flours when containing hexavalent chromium compounds or biocides (note the related entry in Part B B3100) A3100 Waste paring and other waste of leather or of composition leather not suitable for the manufacture of leather articles, containing hexavalent chromium compound and biocides (note the related entry in Part B B3090) A3110 Fellmongery wastes containing hexavalent chromium compounds or biocides or infectious substances (note the related entry in Part B B3110) A3140 Waste non-halogenated organic solvents but excluding such wastes specified in Part B A3150 Waste halogenated organic solvents A3160 Waste halogenated or unhalogenated non-aqueous distillation residues arising from organic solvent recovery operations A3170 Waste arising from the production of aliphatic halogenated hydrocarbons (such as chloromethane, dichloro-ethane, vinyl chloride, vinylidene chloride, allyl