Gujarat Legal Metrology… Bare Act

The source publishes this enactment as a single document rather than provision by provision, so the whole text is below and there are no per-section pages for it. Nothing has been shortened.

Type	Rules
Year	2009
Jurisdiction	State of Gujarat
Status	In force as published by the source
Text	Published as one document, as the source published it
Subjects	consumer

Extra No. 33 REGISTERED No. G/GNR/2 The Gujarat Government ®asette EXTRAORDINARY PUBLISHED BY AUTHORITY THURSDAY, MARCH 31, 20L1/CHITRA 10, 1933 Separate paging is given to this Part in order that it may be filed as a Separate Compilation.

PART IV-A Rule and Orders (Other than those published in Parts I, I-A, and I-L) made by the Government of Gujarat under the Central Acts Food, Civil Supplies and Consumer Affairs Department Notification Sachivalaya, Gandhinagar, 31° March, 2011. Legal Metrology Act, 2009. No. GTH-2011-30-K M¥V-102010-422744-D:- WHEREAS, certain draft rules were published as required by sub-section (4) of section 53 of Legal Metrology Act, 2009 (1 of 2010), at pages 2-1 to 2-72 in the Gujarat Government Gazette, Extraordinary, Part IV-A, dated the 6" January, 2011, under the Government Notification, Food, Civil Supplies and Consumer Affairs Department, No: GTH- 201 1-2-KMYV- 102010-422744-D, dated 6" January, 2011, inviting objection or suggestion from all persons likely to be attected thereby within a period of thirty days from the date of publication of the said notification in the official Gazette. AND WHEREAS, the objections or suggestions received by the Government on the said draft rules, have been considered by the Government: NOW, THEREFORE, in exercise of the powers conferred by sub-section (1) of section 53 of the Legal Metrology Act, 2009 (1 of 2010), the Government of Gujarat hereby makes the following rules, namely :- I, Short title, extent and commencement- {1} These rules may be called the Gujarat Legal Metrology (Enforcement) Rules, 2011. a —

(2) They extend to the whole of the State of Gujarat.

(3) They shall come into force on the 1° April, 2011. Definitions — In these rules, unless the context otherwise requires,

(a)*Act” means the Legal Metrology Act, 2009;

(b)"Reference Standards Laboratory” means a laboratory set up by the Central Government under the Act. where Reference Standards, Secondary Standards and Working Standards are maintained:

(d)words and expressions used in these rules and not defined but defined in the Act shall have the meanings respectively assigned to them in the Act. ba IV-A-Ex. 33-1 o3e| Le a he d I be a Le d GUJARAT GOVERNMENT GAZETTE, EX., 31-03-2011 [PART [V-A Reference Standards — The Reference Standards shall be kept at such place, in such manner and in such custody as prescribed under the Legal Metrology (National Standards) Rules, 2011. Secondary Standards — (1) Every Secondary Standards shall be verified at any of the Reference Standards Laboratories, in such manner and at such periodical intervals as may be prescribed under the rules to be made in this behalf and shall, if found on such verification to conform to the Standards established by or under the Act, be stamped by Reference Standard Laboratory or a certificate of verification will be issued by that laboratory.

(2) The Secondary Standards shall be kept at such place, and in such custody as the controller may direct, Working Standards — (1) Every Working Standard shall be verified either at any of the Reference Standards laboratories or at any of the Secondary Standards Laboratories maintained by the State Government, in such manner and at such periodical intervals as may be prescribed under the rules to be made in this behalf and shall, if found on such verification to conform to the Standards established by or under the Act, be stamped or certificate of verification will be issued by that laboratory as the case may be.

(2) The Working Standards shall be kept in the custody of legal metrology officer. Secondary Standard balances — (1) A set of Secondary Standard balances shall be maintained at every place where Secondary Standard Weights are kept.

(2) The number, types and specifications of such balances shall be such as may be prescribed under the Legal Metrology (General) Rules, 2011.

(3) Every Secondary Standard balance shall be verified at least once within a period of twelve months and shall be adjusted, if necessary, to make it correct within the limits of sensitivity and other metrological qualities prescribed under the Act, by the Reference Standards Laboratory or by the Controller or such other officer as may be authorized by the Controller in this behalf. Working Standard Balances: (1) A set of Working Standard balances shall be maintained at every place where Working Standard Weights are kept.

(2) The number, types and specifications of such balances shall be such as may be prescribed under the Legal Metrology (General) Rules, 2011.

(3) Every Working Standard balance shall be verified at least once within a period of twelve months and shall be adjusted, if necessary, to make it correct within the limits of sensitivity and other metrological qualities prescribed under the Legal Metrology (General) Rules, 2011, by the Reference Standard Laboratory or at any of the place where Secondary Standards are maintained by the State Government. Physical characteristics, configuration, constructional details of Weights and Measures— Every Weight or measure used or intended to be used in any transaction or for protection shall conform as regards physical characteristic, configuration, constructional details, materials, performance, tolerances and such other details, to the specifications prescribed under the Act or the Legal Metrology (General) Rules, 2011. Use of Bullion Weights, Carat Weights, ete. — (1) No Weight other than a Bullion Weight shall be used in any transaction in bullion including precious metals, pearls, ornaments or other articles made of gold or silver.

(2) No weight other than a carat weight shall be used in any transaction in precious stones.

(3) Only beam scale of class A or class B category or a non automatic weighing instrument of high accuracy class (class II) or special accuracy class (class I) shall be used in any transaction referred to in sub-rules (1) and (2). Use of weights only or measures only or number only in certain cases. — Except in the cases of commodities specified in Schedule 1, the declaration of quantity in every transaction, dealing om contraet, or for protection shall be terms of the unit of -

PART TV-A] i GUJARAT GOVERNMENT GAZETTE, EX., 31-03-2011 33-. 11, Le o he l

(a) weight, ifthe commodity is solid, semi-solid, viscous or a mixture of solid and liquid ;

(b) length, if the commodity is sold by linear measure:

(d) volume, if the commodity is liquid or is sold by cubic measure: or

(e) number, if the commodity is sold by number. Licencing of manufacturer, repairer and dealer of Weights and Measures —

(1) Every manufacturer of, or repairer of, or dealer in, weight or measure shall make an application for the issue of a licence to the Controller legal metrology or such other officer as may be authorized by him in this behalf, in the appropriate form as prescribed in Schedule IT A:

Provided that no licence to repair shall be required by a manufacturer for repair weight or measure manufactured by him and used in a State other than the State of manufacture of the same, but the manufacturer has to inform in advance the concerned legal metrology officer about the repairing.

(2) Every manutacturer-of, or repairer of, or dealer in weight or measure shall make an application for the renewal of a licence within thirty days before the expiry of validity of the licence to the Controller of legal metrology or such other officer as may be authorized by him in this behalf, in the appropriate form as prescribed in Schedule II B.

(3) Every licence issued to a manufacturer, repairer or dealer shall be in the appropriate form as prescribed in Schedule II.

(4) Every licence issued to a manufacturer, repairer, or dealer shall be valid for a minimum period of one calendar year and may be renewed for a period of five years, by the Controller or such other officer as may be authorized by him in this behalf on payment of per year fee as specified in Schedule IV.

(5) The fee payable for the alteration of a licence or for the issue of a duplicate licence shall be one half of the licence fee as specified in Schedule [V and an application shall be made in the form as prescribed in Schedule XII.

Provided that an additional fee at full the rates specified in Schedule TV shall be payable by the applicant if he is permitted by the Controller to make an application for the renewal of a licence within a period of three months from the date of expiry of the licence.

(6) The Controller or such other officer as may be authorized by him in this behalf shall maintain a register of licenced manufacturers, dealers and repairers in the form as prescribed in Schedule V.

(7) Every manufacturer, repairer or dealer licenced under the Act and these rules shall maintain such workshop, equipments, tools, registers, etc. as the case may be, as per the terms and conditions of the licence.

(8) Every repairer licenced under the Act and these rules shall furnish a security deposit for each licence to the State Government as specified in Schedule VI.

(9) Every licence issued or renewed under this Act shall be displayed in a conspicuous place in the premises where the licencee carries on business.

(10) A licence issued or renewed under this Act shall not be saleable nor transferable.

(11) The basic minimum requirements for licensee repairers shall be as prescribed in Schedule VI-A. The existing licensed repairer shall comply with the prescribed provisions within a period of 12 months from the date of the commencement of these Rules.

(12) All licensee manufacturers shall be having tools and equipments in their production workshop as per TABLE F prescribed under Schedule VI-A. The existing licensed manufacturer shall comply with the prescribed provisions within a period of 12 months from the date of the commencement of these rules. iS.

15. GUJARAT GOVERNMENT GAZETTE, EX., 31-03-2011 [PART TV-A Suspension and cancellation of licence granted:

(1) The Controller or such other officer authorized by him in this behalf may, if he has any reasonable cause to believe that the holder of any licence issued, renewed or continued under this Act has made any statement in, or in relation to, any application for the issue, renewal or continuance of the licence, which is incorrect or false in any material particular or has contravened any provision of the Act or any rule or order made thereunder, suspend such licence, pending the completion of any inquiry against the holder of such licence:

Provided that no such licence shall be suspended unless the holder thereof has been given a reasonable opportunity of showing cause against the proposed action:

Provided further that where the inquiry referred to in this sub-rule is not completed within a period of three months from the date of suspension of a licence, such suspension shall, on the expiry of the period aforesaid, stand vacated,

(2) The Controller or such other officer authorized by him in this behalf may, if he is satisfied, after making such inquiry as he may think fit, that the holder of a licence has made a false or incorrect statement of the nature referred to in sub-rule (1), or has contravened any law or order referred to in that sub-rule cancel such licence:

Provided that no such licence shall be cancelled unless the holder thereof has been given a reasonable opportunity of showing cause against the proposed action.

(3) Every person whose licence has been suspended shall, immediately after such suspension, stop functioning as such licencee and shall not resume business as such licencee until the order of such suspension has been, or stands, vacated.

(4) Every licencee whose licence has been suspended or cancelled shall, after such suspension or cancellation, as the case may be, surrender such licence to the authority by which such licence was issued,

(5) Every licencee whose licence has been cancelled shall, within a period of thirty days from the date of such cancellation, or within such further period, not exceeding three months from such date, as the Controller or such other officer authorized by him in this behalf may, on sufficient cause being shown, allow. dispose of the weights or measures which were in his possession, custody or control on the date of such cancellation and in the event of his failure to do so, the Controller or any other officer authorized by him, in writing, in this behalf, may seize and dispose of the same and distribute the proceeds thereof in such manner as may be prescribed. Records to be maintained by manufacturers, ete - Every manufacturer of or repairer of, or dealer in weight or measure licenced under the Act and these rules shall maintain records and registers in the appropriate form as prescribed in Schedule VII. Every licence holder shall furnish appropriate returns in the form as prescribed in Schedule VII duly signed by him to the concerned officer within 15 days from the end of the quarter to which the return relates, if required he shall submit the same in Oniine form also, Periodical interval for the verification of weights or measures — Periodical interval for the verification of weights or measures shall be as specifed in the Legal Metrology (General) Rules, 2011. Verification and inspection of weights or measures — (1} Every person using any weight or measure in any transaction or for protection shall present such weight or measure for verification / re-verification, at the office of the Legal Metrology Officer or at such other place as the Legal Metrology Officer may specify in this behalf on or before the date on which the verification falls due and shall make an application as per the form prescribed In Schedule XII for getting that weight or measure verified / re-verified: PARTIV-A] : GUJARAT GOVERNMENT GAZETTE, EX., 31-03-2011 33-

16. Wah l

Provided that where any weight or measure is such that it cannot, or should not be moved from its location, the person using such weight or measure shall report to the Legal Metrology Officer at least thirty days in advance of the date on which the verification falls duc.

(2) Where any weight or measure is such that it cannot, or should not, be moved from it’s location, Legal Metrology Officer shall take necessary steps for the verification of such weight or measure at the place of its location.

(3) For the verification of weight or measure referred to in sub-rule (2) the user shall provide such facilities as may be specified by the Controller.

(4) Every weight or measure presented for verification shall be complete in itself.

(5) Every weight or measure shall be verified in a clean condition, and if necessary, the Legal Metrology Officer shall require the owner or user to make necessary arrangement for the purpose.

(6) A Legal Metrology Officer may visit, as frequently as possible during the period specified in rule 14, every premise within the local limits of his jurisdiction to inspect and test any weight or measure which is being or is intended or likely to be used in any transaction or for protection.

(7) The legal metrology officer shall obliterate the stamp on any weight or measure, if it is found during inspection that:-

(a) Any weight or measure which being due for re-verification has not been submitted for such reverification,

(b) Any weight or measure which does not conform to the Standards established by or under the Act:

Provided that where the legal metrology officer is of opinion that the defect or error in such weight or measure is not such as to require immediate obliteration of the stamp, he shall inform the user, of the defect or error found in the weight or measure and call upon user to remove the defect or error within such time, not exceeding eight days and shall-

(i) if user fails to remove the defect or error within that period, obliterate the stamp, or

(it) if the defect or error is so removed as to make the weight or measure conform to the standards established by or under the Act, verify and stamp such weight or measure.

Explanation. The obliteration of the stamp on any weight or measure shall not take, away or abridge the power of the legal metrology officer to seize such weight or measure in accordance with the provisions of the Act. Stamping of weights or measures — (1) The Legal Metrology Officer shall stamp every weight or measure, if after testing and verification, he is satisfied that such weight or measure conforms to the standards established by or under the Act, with a stamp of uniform design, issued by the Controller, which shall indicate the number allotted for administrative purpose to the Legal Metrology Officer by whom it is stamped:

Provided that if by reason of the size or nature of any weight or measure it is not desirable or practicable to put a stamp thereon, the Legal Metrology Officer shall take such action as may be directed by the Controller by a general or a special order in writing,

(2) The Legal Metrology Officer shall also mark the year and its quarter of stamping on every verified weight or measure except when the size or nature of such weight or measure makes it impracticable,

Explanation : A year shall be deemed to consist of four quarters of which first quarter shall be of the months of January, February and March which shall be marked as A; second quarter shall be of the months of April, May and June which shall be marked as B, third quarter shall be of the months of July, August and September which shall be marked as C and fourth quarter shall be of the months of October, November and December which shall be marked as D.

(3) On completion of verification and stamping the Legal Metrology Officer shall issue a non transferable certificate of verification in the form as prescribed in Schedule VIII. La w la s

17.

18. GUIARAT GOVERNMENT GAZETTE, EX., 31-03-2011 [PART IV-A

(4) Where a certificate of verification is lost or destroyed, the holder of the certificate of verification shall forthwith apply to the Legal Metrology Officer who had issued the certificate, for the issue of a duplicate certificate of verification, Every such application for the issue of a duplicate certificate shall be accompanied by a fee of rupees twenty five.

(5) On receipt of an application under sub-rule (4), the Legal Metrology Officer shall issue to the applicant a duplicate copy of the certificate of verification marked as “DUPLICATE. Fee for verification - (1) Fees payable for verification and stamping of weight or measure at the office or camp office of the Legal Metrology Officer shall be as specified in Schedule IX.

(2) Tf, at the request of the user of weight or measure, verification is done at any premises other than the office or camp office of the Legal Metrology Officer, an additional fee shall be charged at half the rate as specified in the Schedule IX and the user of the weight or measure shall pay the expenses incurred by the Legal Metrology Officer for visiting the premises including the cost of transporting and handling the Working Standard and other equipment subject to a minimum of rupees one hundred,

Provided that no additional fee shall be charged for verification and stamping of weights and measures in situ of,-

(i) vehicle tanks for petroleum products and other liquids, Meter for Liquids Other than Water (Fuel Dispenser, Liquid Petroleum Gas, Milk Dispensers), Compressed Natural Gas Dispensers, Nonautomatic Weighing Instruments like weighbridges, platform machines, crane scale, Automatic Gravimetric Filling Instruments, Automatic Rail-weighbridge, Discontinuous Totalizing Automatic Weighing Instruments, and such other weight or measure which cannot, and should not be moved from its location:

(ii) Weight or measure in the premises of manufacturer or dealer of such weight or measure.

(3) lf a weight or measure is presented to the Legal Metrology Officer for re-verification after expiry of the validity of the stamp, an additional fee at. half the rates specified in Schedule IX shall be payable for every quarter of the year or part thereof,

(4) Full fee shall be payable for re-slamping any weight or measure held in stock with manufacturer or dealer within the period specified, in rule 14 from the date on which it was last stamped, provided that the original stamp was not obliterated.

(5). A weight or measure which on verification is found to be incorrect shall be returned to the person concerned for adjustment informing him, in a proforma specified by the Controller, of the defects found in the weight or measure, and calling: upon him to remove the defects within a period not exceeding seven days. When the necessary adjustment has been carried out, such weight or measure shall be verified on payment of the fees specified in Schedule TX and if found correct shall be stamped. Collection of fees and deposit into the Treasury - (1) Before commencing the work of verification or re-verification, the Legal Metrology Officer shall inform the person concerned of the fees payable by him and shall receive the same in the manner as authorized by the Controller and issue a reccipt in the standard prescribed form approved by the Controller, one copy of such receipt being kept on record:

Provided that fees payable by a department of the Central or State Government under these rules may be realized in such manner as may be directed by the Controller.

(2) The Legal Metrology Officer shall maintain a register, in the standard preseribed form approved by the Controller, which shall be written up from day-to-day and shall show the amount of fees and other charges collected during the day.

(3) All payment received by the Legal Metrology Officer during the week shall be paid into the Government Treasury under the appropriate “Head of Account” on such dates or days as may be specified by the Controller from time to time, and a receipt thereof be obtained and an intimation to that effect be sent to the Controller or other officer authorized by him in this behalf

PART IV-A] : GUJARAT GOVERNMENT GAZETTE, EX., 31-03-2011 43-7

19. hubs Disposal of seized weights, measures, ete. - (1) Any un-verificd weight or measure shall be returned to the person from whom such weight or measure was seized if that person gets the same veritied and stamped, within fifteen days of the return, on payment of the prescribed fee including the additional fee payable for undertaking re-verification after the expiry of the validity of the stamp.

(2) Any weight or measure or document or thing or goods seized and detained under section 15 of the Act, which is to be the subject of proceedings in a court shall be produced by the legal metrology officer before the court shall after conclusion of the proceedings, be taken possession of by the legal metrology officer and dealt with in accordance with the orders of the court:

Provided that in the absence of the orders of the court, weight or measure or document or thing or goods shall be deal with as the controller may by special order direct and the material thereof shall be sold and the proceeds credited to the Government.

(3) Where the soods seized under sub-section (1) of section 15 of the Act are not subject to speedy or natural decay, the legal metrology officer may retain the package for the purpose of prosecution under this Act after giving the trader or his agent or the other person (who has committed the offence) a notice of such seizure.

(4) The goods referred under sub-rule (5) which are not to be the subject of proceedings in a court, shall after the expiry of sixty days of its seizure, be so dealt with as the Controller may by special order direct. Validity of weights or Measures duly stamped- (1) A weight or measure which is, or is deemed to be, duly verified and stamped under these rules shall be deemed to conform to the standards established by or under the Act at every place within the State in which it is stamped unless il is found on inspection or verification that such weight or measure has ceased to conform to the standards established by or under the Act.

(2) No weight or measure which is, or is deemed to be, duly verified and stamped under this Act shall require to be re-stamped merely by reason of the fact that it is being used at any place within the State other than the place at which it was originally verified and stamped: -

Provided that where a verified weight or measure, installed at one place is dismantled and reinstalled at a different place, such weight or measure shall not be put into use unless it has been duly re-verified and stamped, notwithstanding that periodical re-verification of such weight or measure has not become due.

(3) Where a verified weight or measure has been repaired, whether by a licenced repaired or by the person owning and possessing the same, such weight or measure shall not be put into use unless it has been duly re-verified and stamped, notwithstanding that periodical re-verification of such weight or measure has not become due. Provision of supply of Working/Secondary Standards, equipment, etc. to the Legal Metrology Officer — (1) Every Legal Metrology Officer shall be provided with Working /Secondary Standards weights, Working/Secondary Standard balances, and such other equipment includes weighing and measuring devices as may be approved by the Controller from time to time.

(2) Every Legal Metrology Officer shall be provided with such dies, punches, paper seal / sticker and such other equipment as may be necessary for affixing the verification stamp, the design and number of which are to be approved by the Controller.

(3) Every Legal Metrology Officer shall be provided with punches of suitable sizes of cight-pointed star as prescribed in Schedule XTV for obliterating stamps. Provisions relating to use of weight, measure, etc — (1) Every person using a beam scale in any transactions in his premises shall suspend the same to a stand or to a chain by a hook:

Provided that this sub-rule shall not apply to itinerant vendors.

(2) Every weight or measure shall be used in a clean condition and in proper lighting arrangement

33.

24.

26. GUIARAT GOVERNMENT GAZETTE, EX., 31-03-2011 [PART IV-4

(3) Any weight or measure, which has been verified and stamped in sifu, shall not be dismantled and removed from its original site without prior intimation to the Controller or other person authorized by him in this behalf.

(4) To ensure a proper check of the accuracy of a weighing instrument the user shall keep at the site of each weighing instrument duly verified and stamped weights equal to one-tenth of the capacity of the instrument or one tonne whichever is less and consumer can also check the accuracy of the weighing instrument:

Provided that the Controller may specify the total number of verified and stamped weights to be maintained in trade premises where the number of weighing instruments are more than one.

(5) To ensure proper delivery of the petrol / diesel pumps, the retail dealer of the pump shall keep a verified 5 litre/|Qlitre capacity measure in his premises and check the out put from the pump every day before put into use of dispensing pump to ensure its correct delivery. In case of any short delivery the dealer shall stop the delivery through the pump immediately and inform the legal metrology officer concerned to recalibrate the pump. Certificate of verification to be exhibited — The person to whom a certificate of verification ts issued shall exhibit the same in a conspicuous place in the premises where the weights, measures or weighing or measuring instruments to which the certificate relates are used:

Provided that in the case of itinerant vendor, the certificate shall be kept with the person:

Provided further that in the case of vehicle tank, the certificate of verification shall be kept with the vehicle. Penalty for contravention of rules — Whoever contravenes any provision of these rules, for the contravention of which no punishment has been separately provided in the Act, shall be punished with fine, which may extend to five thousand rupees. Whenever rules are in conflict with the provisions of the Act. the Act will prevail the rules. Form of appeal - (1) Every appeal under the Act and these rules shall be preferred in the form specified in Schedule X, and shall be accompanied by a copy of the order appealed against.

(2) An application for appeal to State Government shall be accompanied by fee of Rs. 500 and for appeal to Controller shall be accompanied by fee of Rs. 200 paid either by cash or by affixing court fee stamp for the said value as the case may be. Fee for compounding of offences- The fee for compounding of offences committed under the Act shall be as prescribed in Schedule AL.

PART IV-A] | se we ete ee ee ees ee ee en ee ee ee ee ee ee ee GUJARAT GOVERNMENT GAZETTE, EX., 31-05-201 | 33-9

SCHEDULE I (See rule It) Exceptions reterred to in Rule 10 The following commodities may be sold by weight, measure or number as show against the SSS Se es i Commodity Whether declaration to be expressed in terms of weight, measure or number or two or more of them. commodity. a a a SS i ee en me ene ents sso Ss ~~ ) oh lL ao a

12. L3;

14.

15. 16, Pit:

18.

19.

20. a 79 ho bo bo bo lw le Aerosol products Acids in liquid form Compressed or liquefied gas (but not liquefied petroleum gas Butter (incl. peanut butter), cheese, curd, chee Electric cables Electric wire Fencing wire Hair oil, un perfumed Fruits and vegetables Furnace oil Linseed oil and other vegetable oils Heavy residual fuel oil Industrial diesel fuel Honey, malt extract, golden sytup treacle Ice cream and other similar frozen products Liquid chemicals Liquid petroleum gas Nails, wood screws Paint (other than paste paints or solid paint), varnish and varnish stairs, enamels Panad Paste paint, solid paint Ressogulla, Gulabjamun and other sweet preparations Ready made garments Sauce, all kinds Tyres and tubes Yarn weight weight or Volume weight and equivalent volume at stated temperature and pressure weight length or weight length or weight length or weight weight or volume number or weight weight or volume weight or volume weight volume weight weight weight or yolume weight number or weight volume number and weight weight weight number and size weight number Weight or length of yarn 33-10 GUIARAT GOVERNMENT GAZETTE, EX., 31-03-2011 [PART IV-A

SCHEDULE II A (See rife [1 (1) FORM LM-1 [Application form for licence as manufacturer of weights and measures under the Legal Metrology Act, 2009] PHOTO PHOTO Owner ‘Partner! Manager/Administrator Person who gave test Director/Chairman of WM manufacturing Mark (“) wherever applicable Lj Name of the Manufacturing concern ...............-.. saaerpemaneustarenaronaynenrenycianhiee oeaeTT 3(a) Nature of the firm: Individual [| Partmership = [—] Company EI Co-op. Soc. [] 2(b) Details of the individual making the application SSLUITIAING. .occeerseerrseceeneee WNAINE...eccseceseeereeeee Father! ss ssssesee sacieeasen Husband's Name 2(c) Complete residential address of the applicant : House Noi .iiiseiisieviecks Sneed f SHOE 2 eset sc cuinscaasnttnaaasunnnsiatean Caly eens Pash iinet BS piticieelt oaaiascte Tel NO.....ccsersserereserrnresceees Mobile: Wo ean Banat icasiti cial: 3(a) Complete address of the workshop : Henise f FACtory TG sosccci cs cinsvsseavaniscensieseene ESE iscavaisenddancenenenanerceetenmamneins ity: sian Taainean Sete BRS sciascrssactanienienes 3(b) Whether workshop premises are : Owned [LO] Rented [| 3(¢) Firm commencement date : dd / mm/ yvy¥y 3(d) Availability of electric energy : Connection No-: Contracted load : 4, Details of various registrations : Whether Reg, certificate dd /mm/ yyyy attached or not

(a) Shop Act Reg. No. Yes [] No a

(by) LT. PAN No. SF Yes No |

(d) Central VAT No. : Yes | | No |

(e) Prof.Tax. No. Yes |] No |

1.= illiterate.

2.= Studied upto Std. 7

3.=S8C fail

4.= Studied upto Std. 11

5.= HSC Pass

6.= Certificate Diploma after Std, 10/12

7.= Graduate / Post Graduate (Arts/Science/Commerce) §.= B.E./ B.Tech / MBA / LLB / LLM | __7.= Others # Code for column No.7

1.= Agriculture ?.= Business / Trading / Profession

3.= Industry

4.= Skilled worker §.= Service in Govt. / Private Organised Sector

6.= Service in unorganised sector (e.g. Small private firm) $ Details of the applicant are to be provided at Sr.No. Details of Partners / Directors / Members are to be provided at Sr. No.2 to Sr, No.8 as applicable. A Column No.' and Column Wo.6 will apply to Partnership firm / Company / Co-operative Society All the information furnished above is true to the best of my / our knowledge. wee ee ee Name and Signature af applicant 33-12 GUJARAT GOVERNMENT GAZETTE, EX., 31-03-2011 [PART IV-A 5(a) . Type of Weights and Measures to be manufactured Weights Measures Weighing | Measuring instruments instruments 5(b) Whether details of above attached in Annexure-! or not? Yes No 6(a) No.of persons employed / proposed to be employed

(1) Skilled... (2) Semiskilled ... (3) Unskilled.., (4) Specially trained... 4(b) Whether details of above attached in Annexure-2 or not ? Yes No | a a. Tentative date for presenting the model manufacturer fy il dd / mm/ yyyy

8. Whether model approval certificate attached or not ? Yes No

9. Whether details of machinery, tools, accessorics attached in . Annexure-3 or not ? Yes No | |

10. Whether details of steel casting / hardness testing / foundry facility attached in Annexure-4 or not ? Yes No i. Whether details of weights and measures in the possession of the applicant on the date of application attached in Annexure-5 or not ? Yes No

12. Did the applicant make any such application previously ? Yes No |

13. Has the applicant been convicted for any offence /’ paid any compounding fee relating to Legal Metrology Yes No LL Act/Rules in the past ? eee ee eee we eee ee Re ee ee ee ee ee eee re Se ee Se ee eee ww errr Tse To be certified by the applicant(s) Certified that I/We have read the Legal Metrology Act, 2009 and the Gujarat Legal Metrology (Enforcement) Rules, 2011 and agree to abide by the same and also the administrative orders and instructions issued or to be issued thereunder. I/We agree to deposit the scheduled licence fees with Government as soon as required to do so by the Licensing Authority. All the information furnished above is true to the best of my / our knowledge. Dale co asinine Signature and name Note: The details of above Sr. No. 5 to 11 shall be attached in the enclosed annexure-] to 5 alongwith the remarks of the Inspecting Officer.

PART IV-A] GUIARAT GOVERNMENT GAZETTE, EX, 31-03-2011 33-13 ANNEXURE-1 (DETAILS OF WEIGHTS, MEASURES TO BE MANUFACTURED) Sr. No. Code of Weights, Measures Type, Capacity and class as Remarks of the (1=weights, applicable Inspecting Officer 2=MeWSsures, 3= weighing instruments, 4=measuring instruments) | : ANNEXURE-2 (DETAILS OF EMPLOYEES) Sr. Category code Name | Date of | Birth | Educational Designation | Monthly | EPF | Remarks l=skilled, cae : : No. eae é joining | Date | Qualification Salary No. | of 3=unskilled, Rs. Inspecting 4=specially officer trained} ANNEXURE-3 (DETAILS OF MACHINERY, TOOLS, ACCESSORIES) Sr. Details of machinery! | Nos. | Remarks [ Sr. | Details of machinery’ | Nos. | Remarks of the No. tools/ accessories of the No. tools/ accessories Inspecting Inspecting Officer : : Officer J . | Portable drill machine 14_| Screw driver set 2 Bench type drill 15 | Allen key Set machine : 3 Welding machine 16 | Drill machine spanner set 4 Portable dise grinder 17 | Flat and round file 3 Bench grinder 18 | Bullion weights (2k¢ | to | mg) 2 | 6 Gas cutting set with 19 | Cl weights (20 kg to |__| PUG machine 50 g) | 7 Magnet drill for 20 | Hammer set weighbridge § Digital multimeter - 21 | Cutter o Soldering iron 3s 22 __| Spanner set seein | 10 | Desoldering gun 23 «| Square lid seal and __| seal wire 11 | Soldering wire 24 | 4 Ton O.H.crane for MW 2 a weighbridge - | 12 | Number punch = and 25 | Testing weights c/a" ABCD punch set max. capacity for - weighbridge) 13__| Nose plier . 4.26 | Other tools ifany Z 33-14 GUJARAT GOVERNMENT GAZETTE, EX., 31-03-2011 [PART IV-A ANNEXURE-4 (DETAILS OF STEEL CASTING / HARDNESS TESTING / FOUNDRY FACILITY) Sr. Details of machinery Nos. Remarks of the inspecting officer ANNEXURE-5 (DETAILS OF WEIGHTS, MEASURES IN POSSESSION OF THE APPLICANT) Sr. No. Code of Weights, Type, Capacity Measures and class as (l=weights, applicable 2=measures, 3= weighing | instruments, 4=measuring instruments) Nos. Remarks of Inspecting officer PARTIV-A] - GUJARAT GOVERNMENT GAZETTE, EX., 31-03-2011 33-15

SCHEDULE I A (See rule £1 (1) FORM LR-1 [Application form for licence as Repairer of weights and measures under the Legal Metrology Act, 2009] PHOTO PHOTO PHOTO Owner /Partner/ Manager/Administrator Person who gave test Director/Chairman of WM repairing 2(a) 2(b) A(c) 3(a) ab) 3(c) 3(d)

4. Mark (”) wherever applicable Name of the Repairing CONGO cio. cccciciiiciisussiitiesissteareseceree seeds ccedadieaseneesneoee Nature of the firm : Individual [_] Partnership [_] Company [_] Co-op. Soc. [—] Details of the individual making the application SSUIMAM Gas. ssccicceseciesteee NATE sss seein Fate par cee oss cess spans / Husband's Name Complete residential address of the applicant : GUISE NG cass csgeececesenen Street / SOGIELY +... ecsesseeeseeenereneeeneses SOY sasccemeenc TEA csstgecsenarevancasecsvcees ND BEE asp tisianensceceaniaetr Tel NO. ciseeiececaan. DLT e ING csncsapieuveciensnsteaceninanye PRA So wcs ae osweeynsieeevveaicns Complete address of the workshop : House: Factory No.........cccssdeveiuescciacsn cee ccc geek ate i aeereeernr ty toe Degen Re asasitenaeseees DIESE se crcee-neee steer etererss Whether workshop premises are : Qwuned [.] Rented [J Firm commencement date : dd /mm/ yyyvy Availability of electric energy : Connection No.: Contracted load : Details of various registrations : Whether Reg. certificate dd /mm/ yyy attached or not Shop Act Reg. No. ves || No LT. PAN No. 3 Yes Hi No State VAT No. : Yes [| No Central VAT No. : Yes i No | | Prof.Tax. No. ae Yes fi No || 33-16 GUIARAT GOVERNMENT GAZETTE, EX., 31-03-2011 [PART IV-A 3 @ Laat . q a “Et a . Name > | st Note 2 ay. 2 g s,| Gumme |281e]3) ¢|2/e| 2 | 2 | 2 | id Name / a a = 3 a o| 5 2 2 o No. 7 2 Sl S| ey afi a | Se = f=" 4 ce g Father =a | 2 o = | = a a i # Husband's | AB] “| & f= a 4 Zs = = Name) i E 3 < 8 z = a vt pa: * | 2 3 4 5 6 7 8 9 10 1] 12 l Details of Partners / Directors / Members as applicable 5 3 4 3 6 7 8 La a | * Code for column No.8 # Code for column No.7 $ Details of the applicant are to be 9 = illiterate. ee at co al of — — Sena Std. ca tee irectors / Members are to be 7 aa saci | é gpcmihike : provided at Sr. No.2 to Sr. No.8 ag 2, = Studied upto Std, 11 oe er : Protession 2

13. = HSC Pass , 10. =Industry A Column No.5 and Column No.6

4. = Certificate Diploma 11. =Skilled worker will apply to Partnership firm / P . a a _ ' after Std. 10/12 12. =Service in Govt, / Private | Company / Co-operative Society

15. = Graduate / Post Organised Sector Graduate 13. =Service in unorganised (Arts/Science/Commerce) fon) (e.g. Small private l6. = B.E./ B.Tech / MBA i 14. =Others LLB / LLM . ; = All the information furnished above is true to the best of my / our knowledge. Name and Signature of applicant

PART IV-A] , GUIARAT GOVERNMENT GAZETTE, EX., 31-03-2011 - 33-17 S(a) Type of Weights and Measures to be repaired 7 Weights Measures | Weighing Measuring instruments instruments 3(b) Whether details of above attached in Annexure-| or not ? Yes No 6(a) No.of persons employed / proposed to be employed

(1) Skilled....... (2) Semiskilled........ (3) Unskilled..... (4) Specially trained......... 6(b) Whether details of above attached in Annexure-2 or not? Yes [ | No a Whether details of machinery, tools, accessories attached in Annexure-3 or not ? Yes No

8. Whether details of weights and measures in the possession of the applicant on the date of application attached in Annexure-4 or not ? Yes No

9. Did the applicant make any such application previously ? Yes No

10. Has the applicant been convicted for any offence / paid any compounding fee relatmg to Legal Metrology Yes ey No Act / Rules in the past ? eee ee ee i eee eee ee ee ee ee ee ee ee ee eee ee ee eee oro corr soos socsss To be certified by the applicant(s) Certified: that I/We have read the Legal Metrology Act, 2009 and the Gujarat Legal Metrology (Enforcement) Rules, 2011 and agree to abide by the same and also the administrative orders and instructions issued or to be issued thereunder. I/We agrec to deposit the scheduled licence fees with Government as soon as required to do so by the Licensing Authority, All the information furnished above is true to the best of my / our knowledge. Date Pesan ane ate e Signature and name Note : The details of above Sr. No. 5 to 8 shall be attached in the enclosed annexure-1 to 4 alongwith the remarks of the Inspecting Officer. 33-18 iWJARAT GOVERNMENT GAZETTE, EX., 31-03-2011 [PART IV-A ANNEXURE-1 (DETAILS OF WEIGHTS, MEASURES TO BE REPATRED) | Sr. No. Cade of Weights, Measures - Type, Capacity and class as Remarks of the (l=weights, applicable Inspecting Officer 7 2=measures, 3= weighing instruments, 4=measuring Instruments) ANNEXURE-2 (DETAILS OF EMPLOYEES) Sr. | Category code | Name | Date of | Birth | Educational | Designation | Monthly | EPF | Remarks No. ie, d. joining | Date | Qualification Salary No. of 3=unskilled, Rs, Inspecting aa i officer | _ ANNEXURE-3 (DETAILS OF MACHINERY, TOOLS, ACCESSORIES Sr. | Details of Nos. Remarks of the Inspecting No. | machinery’ tools/ Officer accessories -

(1) The equipments and machineries required for repairing mechanical weighing instruments shall be as per TABLE-A of Schedule VIA, under rule 11.

(2) The equipments and machineries required for repairing electronic weighing instruments shall be as per TABLE-B of Schedule VIA, under rule 11. QB) All licensee repairers shall be required to keep loan sets as per TABLE-C of Schedule VIA under rule 11 for repairing of mechanical weighing instruments.

(4) All licensee repairers shall be required to keep loan sets as per TABLE-D of Schedule VIA under rule 11 for repairing of clectronic weighing instruments.

(5) All licensee repairers shall be required to keep test weights and measures as per TABLE-E of Sehedule VI A under rule 11. ANNEXURE-4 (DETAILS OF WEIGHTS, MEASURES IN POSSESSION OF THE APPLICANT) Sr. No. Code of Weights, | Type, Capacity Nas. Remarks of Measures ( |=weighis, 2=measures, applicable 3= weighing instruments, 4=measuring instruments) and class as Inspecting officer

PART IV-A]. GUJARAT GOVERNMENT GAZETTE, EX., 31-03-2011 33-19

SCHEDULE ILA (See rule [1 (I) FORM LD-1 [Application form for licence as Dealer of weights and measures under the Legal Metrology Act, 2009] 2(a) 2{b) 2(¢) 3a) 3(b) 3{c) 3(d)

(a)

(b)

(d)

(ie) PHOTO PHOTO Owner /Partner/ Manager/Administrator Director/Chairman Mark (“) wherever applicable DEE CLVE AC HEEB sesreescrstec hn al eesc crams ae reeek as cad sad ulus duce tancdvadeclomuben: Nature of the firm : Individual [_] Partnership [_] Company = [—] Co-op. Soc. [7] Details of the individual making the application SUIMAME....ccceceeeseeeceets MAINE... cesecereseeeers Father/ Es siadhcaen Husband's Name Complete residential address of the applicant : House No..........-. mereets Giteky tc set, ae as ncieilis (aby casincaseicaee ss MeL esd seca teen aa DOSE sresensposatesne panne EEN UO caancnpxunzsarszescrasornanenns PAOD IG ING. ac reninnrinpedercncecusene Bimal... csscesseneessesease Complete address of the Office : SSD TM Gh accisiccss ac vcssierreescanceaneewe ECIGAEID YS cai cksa cvarecsiiccsucnavspecarneeeeees Cie: Pasi ee Dist se Whether Office premises are: Owned [__ ] Rented [ ] Firm commencement date : | dd / mm/ yyyy Availability of electric energy : Connection No.: Contracted load : Details of various registrations : Whether Reg. certificate dd /mm/ yyy¥y attached or not Shop Act Reg. No. [t~—S™T Yes [] No |

17. = illiterate. provided at Sr.No, Details of Partners

18. = Studied upto Std. 7 15. =Agriculture ‘ Directors i Members are to be

19. =SSC fail ; ; provided at Sr. No.2 to Sr. No.8 as 30, ne e . 16, =Business / Trading ! applicable, _ 20. = Studied upto Std. 11 Profession . 2]. = HSC Pass 17. =Industry A Column No.S and Column No.6

22. = Certificate Diploma 18. =Skilled worker will apply to Partnership: firm after Std. 10/12 19, =Service in Govt. / Private | Company / Co-operative Society

23. = Graduate / Post Organised Sector ” Graduate 20. =Service in unorganised (Arts/Science/Commerce) firm). (e.g. Small privaic

24. = B.E./ B.Tech / MBA! 31. =Others LLB / LLM All the information furnished above is true to the best of my / our knowledge. wee be eee Re Name and Signature of applicant 4

PART IV-A] : GUJARAT GOVERNMENT GAZETTE, EX,, 31-03-2011 33-21 5(a) Type of Weights and Measures to be sold Weights | | Measures Weighing Measuring ___- instruments instruments 3(b) Whether detatls of above attached in Annexure-| or not ? Yes No 6(a) No.of persons employed / proposed to be employed

(1) Skilled....... (2) Semiskilled ......... (3) Unskilled..... (4) Specially trained....... 6(b) Whether details of above attached in Annexure-2 or not? Yes No 7(a) Whether the applicant / firm intends to import weight / measure from places outside the State / Country Yes No T(b) If yes, ijName of manufacturer of other State / COUNTY .....cecseereeeneeeteecseeseetee | ii)Licence No, of the manufacturer .........0..-.-cesceeteeeeees iii)Importer registration of weight, measure if applicable... iv)Model approval certificate Now. seers ( copies shall be attached)

3. Did the applicant make any such application previously ? Yes No

9. Has the applicant been convicted for any offence / paid any compounding fee relating to Legal Metrology Yes No Act / Rules in the past ? To be certified by the applicant(s) Certified that I/We have read the Legal Metrology Act, 2009 and the Gujarat Legal Metrology (Enforeement) Rules, 2011 and agree to abide by the same and also the administrative orders and instructions issued or to be issued thereunder. /We agree to deposit the scheduled licence fees with Government as soon as required to do 50 by the Licensing Authority. All the information furnished above is true to the best of my / our knowledge. DRAG Eo. ecsiissvabsnetviddioaanenssé Signature and name Note : The details of above St. No. 5 and 6 shall be attached in the enclosed annexure-1 and 2 alongwith the remarks of the Inspecting Officer. ~A, 4=specially irained) officer 33-22 GUJARAT GOVERNMENT GAZETTE, EX., 31-03-2011 [PART IV ANNEXURE-1 (DETAILS OF WEIGHTS, MEASURES TO BE SOLD) Sr. No. ‘Code of Weights, Measures T ype. Capacity and class as Remarks (1=weights, applicable 2=measures, 3= weighing instruments, 4=measuring instruments) 1 — ANNEXURE-2 (DETAILS OF EMPLOYEES) ‘Sr. ‘Category code ‘Name | Date of | Birth | Educational Designation | Monthly | EPF Remarks (l=skilled, pear gentry No. Spemiskdllad: joining | Date Qualification Salary No. of 3=unskilled, Rs. Inspecting

PART IV-A] : ' GUJARAT GOVERNMENT GAZETTE, EX., 31-03-2011 33-23

SCHEDULE IIB (See rule 11f2)) FORM LM-2 | Application form for renewal of licence as manufacturer of weights and measures under the Legal Metrology Act, 2009] PHOTO PHOTO PHOTO Owner /Partner/ Manager/ Administrator Person who gave test Director/Chairman of WM manufacturing 22) 2(b) 2(c)

(a)

(b)

(c)

(d)

(e) (Note : Mark () wherever applicable Name of the Manufacturing COMCENMT ...........060-:000susscscssnesennrseseeceescceeeaeeenmeneneeee Nature of the firm : Individual Partnership C4 Company [_] Co-op. Soc. [_] Details of the individual making the application Senerane sae ssdss a NATRE, ies Batherh — iiscueesuseeccecetes Husband's Name Complete residential address of the applicant : House NoO...cccceceecrecers Street / SOGGY 2 ......ssssessseensnerercesceeees SUEY sca ccaeneniss Tea at akin ca banaesaiy wean te LSE anisissvesedesaannniner Tel Nossteauinne nies Mobile No....cs5..-3 cdi PREF cecscelapancvanenntediees Complete address of the workshop : House / Factory MO:......csssssisevsssessencsnsans LAG eases CAT esnanexnesveceen HA at bacon cpsntcnsnn saree PSE onsen spenpennrveteges ka Whether workshop premises are : Qwned [—_] Rented [7 _] Firm commencement date ; ‘mov yyyy Availability of electric energy : Connection No.: Contracted load : | Details of various registrations : WhetherReg. certificate dd /mm/ yyy attached or not Shop Act Reg. No. Yes [|] No | | LT. PAN No. Yes [| No [| State VAT No-: Yes No | Central VAT No. : Yes No Prof'Tax. No- oie Yes || No Details in Serial No.4(a) to 4(c) are to be provided only if there is a change in amy previous registration} 33-24 GUJARAT GOVERNMENT GAZETTE, EX., 31-03-2011 [PART IV-A @ [8 Lo S | meme |oal_lal 2/2le| 2 | #2 | 2 | £ Sr (Sumame/ | 2 2] & | 6 = 2 5 e Te GE Q “ ae Name / aot Ss |S co oc) & = 2 A 3 a No. H oe ol) tar nn = “a im = fe "3 i © Father - = Bl x @ s on é S os mi cS Husband's |S 3] “ a = iS ‘ = Se a 2 Name) = ee eee me 35 = ee 2) ee i oO | Z 3 4 5 & 7 8 9 10 11 12 l — Details of Partners / Directors / Members as applicable 2 3 —— 4 3 6 7 8 25 26 Bhs

28.

29.

30. $i. . = illiterate. . = Studied upto Std. 7 =S8C fail = Studied upto Std. 11 = HSC Pass = Certificate Diploma after Std. 10/12 = Graduate / Post Graduate (Arts/Science/Commerce) .= B.E./ B.Tech / MBA / LLB / LLM # Code tor column No.7 Ze.

23.

24. ea 26, Zt.

28. = Agriculture = Business / Trading / Profession = Industry = Skilled worker =Service in Govt. / Private Organised Sector = Service in unorganised sector (¢.2. Small private firm) = Others $ Details of the applicant are to be provided at Sr.No, Details of Partners ' Directors / Members are to be provided at Sr. No.2 to Sr. No.8 as applicable, A Column No.§ and Column No.6 will apply to Partnership firm / Company / Co-operative Society All the information furnished above is true to the best of my / our knowledge. Name and Signature of applicant

PART IV-A] GUJARAT GOVERNMENT GAZETTE, EX.,, 31-03-2011 S(a) Type of weights and measures manufactured during the last 12 months Weights Measures Weighing Instruments §(b) Whether details of above attached in Annexure-1 or not ?

6. Do you propose any change in the above Weights Measures Weighing instruments a= ] Has the applicant been convicted for any offence / paid any compounding fee relating to Legal Metrology Act / Rules in the past five years ? pee Yes No Wes 33-25 Measuring instruments “——— Measuring instruments No oe Le ee ee ee ee ee ee ee Se ee ee eee a To be certified by the applicant(s) Certified that We have read the Legal Metrology Act, 2009 and the Gujarat Legal Metrology (Enforcement) Rules, 2011 and agree to abide by the same and also the administrative orders and instructions issued or to be issued thereunder. I/We agree to deposit the scheduled licence fees with Government as soon as required to do so by the Licensing Authority. All the information fumished above is true to the best of my / our knowledge. Dhaite eeeecny-ttieen iain vend teens ‘Signature and name Note : The details of above Sr. No. 5 shall be attached in the enclosed Annexure-1 alongwith the remarks of the Inspecting Officer. ANNEXURE-1 (DETAILS OF W GUJARAT GOVERNMENT GAZETTE, EX., 31-03-2011 [PART TV-A EIGHTS, MEASURES MANUFACTURED DURING THE LAST 12 MONTHS STOCK STATEMENT Sr. No. Opening Stock Quantity | Total (24-3) Quantity sold Closing stack — manufactured during the (4-5) during the month month 7 - 2 | 3 4 a: 6 7 | TRANSACTION STATEMENT | a ~~. Details of Dealer Details of trader na = | Son SH = . , ov 5p os [ai | Se ee] 2] a2] 588! gs «| 2 2 | 2 oF & 4 we | eas 4 2 A 2 ra = = ele es | § |ee2| P25] 8 = | S/o] 6 “ |) £2) a= O| 88/8 as 5 > ao F 3 = a oe sf Big | OS 8 é = a a Ou 5 $ | £ ae s| 3 nm) s m |: a ce 1 | 2 3 z\| 3 6 7 gs | 9 10 ii | 12 | 13 Note:

1. In column 5 - Letter "I" stands for Inside State and Letter "O" stands for Outside State.

2. In column 6 - Letter "TD" stands for Dealer and letter "T" stands for Trader.

3. Only the letters 1/ O and D/ T are to be mentioned the prescribed columns.

PART IV-A] GUJARAT GOVERNMENT GAZETTE, EX., 31-03-2011 33-27

SCHEDULE UB (See rule [1(2)) FORM LR-2 | Application form for renewal of licence as repairer of weights and measures under the Legal 2(a) 2(b) 2c) 3(a) 3(b) 3(c) 3(d)

(a)

(b)

(c)

(d)

(e) (Note : Metrology Act, 2009] PHOTO PHOTO PHOTO Owner ‘Partner! Manager Administrator Person who gave test Director/Chairman of WM repairing Mark () wherever applicable | Name of the repairing COMCEI .....ccceeceessecssseenaterneeneennenestseennnanrannnersstseenannagte Nature of the firm : Individual [_] Partnership [[_] Company [_] Co-op. Soc. [_] Details of the individual making the application SUTTMAIME. .cccceseerecee-eee NAIM... ceccceeceneseeee Father/ Spee Uy Baa oi ge Husband's Name Complete residential address of the applicant : House No... Binet | BOGE bo escctaiamccngeiniegereianesans CARY ..--s-2secaneees TB stssecttaeeateaesieeedt Piste Tel NO... ..eee--cesteeernenerenees Mobile ING, . .iciensscvissscivnnveate Fermatth afi sitceckn pct Complete address of the workshop : Shop / Factory No......ccseeeeeeeeseeseeneseer LiGCS LE ccescssentnnennsrnenesnceaamnnpcnernasts CCHY. nerve enseannstae Ga ee EMS hiccpepccuaneaiianants Whether workshop premises are : Owned [_] Rented [| Firm commencement date : dd /mm/ yyvy Availability of electric energy : Connection No.: | Contracted load : Details of various registrations : Whether Reg, certificate dd /mm/ yyyy attached or not Shop Act Reg. No. Yes fg No | | LT. PAN No. Yes [| No | | State VAT Wo. ; | Yes ‘ No [ Central VAT No. ; | Yes | No g Prof. Tax. No. Yes | No | | Details in Serial No.4{a) to 4(e) are to be provided only if there is a change in any previous registration) 33-28 GUJARAT GOVERNMENT GAZETTE, EX., 51-03-2011 [PART I'V-A me | a ee G Name | = 4 <] Ss g . = 2 Z g g, | (Surnamey {ele | = a| 3 3 = ee) 2 an No Name / mo =| & 5 eo) iS & 25 3 & . Father - a si “ ob a Bee oe g a 4 s " Husband's |H SBS] | 6 a a | of = os 2 a ~ a = = s = a 5 = Name) "i a e 3 — 8a ‘= a A m4 A ] “2 3 4 3 6 T 5 9 LO 11 12 | Details of Partners / Directors / Members as applicable 2 | 3 4 =. a ‘i i § | * Code for column No.8

33. = illiterate.

34. = Studied upto Std. 7

35. =S5C fail

36. = Studied upto Std. 11

37. = HSC Pass 3%. = Certificate Diploma after Std_ 10/12 39, = Graduate / Post Graduate (Aris/Science/Commerce)

40. = B.E./ B.Tech / MBA / LLB / LLM # Code for column No.7

29.= Agriculture

30.= Business / Trading / Profession

31.= Industry

32.= Skilled worker

33.= Service in Govt. / Private Organised Sector

34.= Service in unorganised sector (¢.2, Small private firm)

35.= Others $ Details of the applicant are to be provided at Sr.No. Details of Partners / [Mrectors / Members are to be provided at Sr. No.2 to Sr. No.8 as applicable. A Column No.4 and Column No.6 will apply to Partnership firm / | Company / Co-operative Society All the information furnished above ts true to the best of my / our knowledge. Name and Signature of applicant

PART IV-A] GUJARAT GOVERNMENT GAZETTE, EX., 31-05-2011 33-29 S(a) Type of weights and measures repaired during the last 12 months Weights | - Measures Weighing Measuring instruments instruments 5(b) | Whether details of above attached in Annexure-1 or not? Yes No ] 6, Do you propose any change in the above Weights Measures Weighing [ Measuring instruments instruments Has the applicant been convicted for any offence / paid ~ ] any compounding fee relating to Legal Metrology Yes [| No Act / Rules in the past five years ? we ee ee ee eee ee eee ee eee ee eee ee ee se a a a a a a ee ee rr ee Se ewer ere rrr ese To be certified by the applicant(s) Certified that l’'We have read the Legal Metrology Act, 2009 and the Gujarat Legal Metrology (Enforcement) Rules, 2011 and agree to abide by the same and also the administrative orders and instructions issued or lo be issued thereunder. ‘We agree to deposit the scheduled licence fees with Government as soon as required to do so by the Licensing Authority. All the information furnished above is true to the best of my / our knowledge. PACE 2 cicseceeneceereessceeeeeeee naan teat etn nentnnceree ces DAIS Seger iscsceeenanceneerts “Ee Signature and name Note: The details of above Sr. No. 5 shall be attached in the enclosed Annexure-| alongwith the remarks of the Inspecting Officer. 33-30 GUJARAT GOVERNMENT GAZETTE, EX., 31-05-2011 [PART IV-A ANNEXURE-1 (DETAILS OF WEIGHTS, MEASURES REPAIRED DURING THE LAST 12 MONTHS) REPAIRER RETURN . Details of | Z ights / = = . weigh = Details of user 2 y 5 = measures | am 5 5 Ra or rr Mistrunents [ey ih a = b 2 eh 3 S2/ 2 sy] o| a 3 = = o Us a ee iS ot 4 ea Er a ra 2 A = ga tune | of ae a = | A a = 7g lcs 4 ee a2| = 23 a ot | a a 4 od = 5 a = a me = = = 5 a eg ° 4 o B a q “ =< 4.8 2 z |e | 3 = | & -Be/2/¢ | E << a ‘S 5 2a Ss Be | 3 3 a a Tob = b * a es |S 2 2 - i] is = se = ] 2 3 4 5 6 7 & g 10 ll 12 13 |

PART IV-A] - GUJARAT GOVERNMENT GAZETTE, EX., 31-03-2011 33-3 |

SCHEDULE IB (See rude L1(2)) FORM LD-2 [Application form for renewal of licence as dealer of weights and measures under the Legal Metrology Act, 2009] PHOTO PHOTO Owner /Pariner/ Manager! Administrator Director/Chairman 2(a) 2(b) 2(c)

(a) 3(b) 3(c) 3(d)

(a)

(b)

(c)

(d) i) Mark (“) wherever applicable Name of the Concert -......ccccccccccsescecscecccceoe-eeessaeeaaeenstanaernneeneeeceeeseetauauananennsens cere Nature of the firm : Individual [_] Partnership [_] Company [| Co-op. Soc. [[_] Details of the individual making the application SUnaMmessciieaio ce Waitieuir ac cuansusave BERD Pe sesvavccnnonenne ws snes Husband's Name Complete residential address of the applicant : Peis NOs. ecccaceetisessnee Street f SOCIGEY nassecnnnscresineth inatanieah api apeas ALY senstcvenernineia EE spasssnnscccerennesin state DIET pecans snensetenenencs "Pel Maegan. WEODHG: Novice cescessneccsepessegpeennees Fall inns viesssensgoers-ceeenne Complete address of the Office : Shop Now... ccs sssseeserececcteeenus TGR sacs a eee OW ecmuenysccnse Tah secersseeecesceeceeeeeeeees BRB bh mrerinetttvrsnerspenns Whether shop premises ar¢: Owned [___] Rented Poo Firm commencement date : dd / mm/ yyyy Availability of electric energy : Connection No.: Contracted load : | Details of various registrations : Whether Reg. certificate dd /mm/ yyyy attached or not Shop Act Reg. No. Yes rf No LT. PAN No. , Yes | No = =a State VAT No. : Yes | | No Central VAT No. : Yes i No | | Prof.Tax, No. | Yes | No | | (Note : Details in Serial No.4(a) to 4(e) are to be provided only if there is a change in any previous registration) 33-32 GUIARAT GOVERNMENT GAZETTE, EX., 31-05-2011 [PART IV-A _ mies 7 - “fp pi # > G | Name a 4 <j 2 | 6 a 5 = 2 2 Sur } Oo py] = 2 BH = = SC) 2 2 Sr (Surname/ | 2 a) & | s 3 oa) 3 3 me z = ihe Name / Arla | s A e/ = Sw = 3 . r a = i = 66 cat a $ Father- | 8] «| #2] sg 13 5 oe a 5 Husband's |S 3|] & = 3 ges = 2 e = 6 ‘ Sea “= a = Name) : ~ e | = = o = = 2 | 4 a 8 A 1 2 a 1.4 Bo dE t 5 9 10 11 12 | a Details of Partners / Directors / Members as applicable es = BS a | SL ll 4 5 6 T & | * Code for column No.8 4] 42 45 45 46 47 48

44. . = illiterate. . = Studied uplo Sid. 7 . =S8C fail = Studied upto Std. 11 . = HSC Pass . = Certificate Diploma after Std. 10/12 _ = Graduate / Post iraduate (Arts/Seience/Commerce) .= B.E./ B.Tech / MBA / LLB / LLM # Code for column No.7 36, aT

38.

39.

40.

41.

42. Agriculture Business / Trading / Profession Industry Skilled worker Service in Govt. / Private Organised Sector Service in unorganised sector (e.g. Small private firm) Others $ Details of the applicant are to be provided at Sr.No. Details of Partners ' Directors / Members are to be provided at Sr. No.2 to Sr. No.8 as applicable. A Column No. and Column No.6 will apply to Partnership firm / Company / Co-operative Socicty All the information furnished above is true to the best of my / our knowledge. Name and Signature of applicant Le d Le d i Le d Le a PART IV-A] : GUJARAT GOVERNMENT GAZETTE, EX., 31-03-2011 5(a) ‘Type of weights and measures sold during the last 12 months Weights | Measures | Weighing Measuring a instruments instruments 5(b) Whether details of above attached in Annexure-1 or not ? Yes a No

6. Do you propose any change in the above Weights Measures Weighing ime Measuring instruments instruments Fe Has the applicant been convicted for any offence / paid any compounding fee relating to Legal Metrology Yes No [| Act/Rules in the past five years ? om mm wee ee eee ee ee ee ne a a ee ee ee a a a a ee ee eee a er ee ee eee To be certified by the applicant(s) Certified that L'We have read the Legal Metrology Act, 2009 and the Gujarat Legal Metrology (Enforcement) Rules, 2011 and agree to abide by the same and also the administrative orders and instructions issued or to be issued there under. L'We agree to deposit the scheduled licence fees with Government as soon as required to do so by the Licensing Authority. All the information furnished above is true to the best of my / our knowledge. Date Decisis Signature and name Note ; The details of above Sr. No. 5 shall be attached in the enclosed Annexure-] alongwith the remarks of the Inspecting Officer. 33-34 GUJARAT GOVERNMENT GAZETTE, EX., 31-03-2011 [PART IV-A ANNEXURE-1 (DETAILS OF WEIGHTS, MEASURES SOLD DURING THE LAST 12 MONTHS) STOCK STATEMENT sr. No. Opening Stock Quantity sold | Closing stock during the (2-3) month l 2 3 4 TRANSACTION STATEMENT a = Details of Dealer Details of trader e |S @_|#8 i a ay Ee o Co cS o ag jo 8 au i ey 5 i“ = 40a (22/2) sciséel = g a | 3) = wie | eo a los | See 2 5 a = eA a a is ¢ = = ‘aa| fo, o 4 a ea a 0 oO as ae o = eo a rl =H rd = = iL te os 3 | Sea a < < By S o = 2 oo 5 : a a | o ot fo} a a aa a ce 1 2 3 4 5 6 f 8 9 10 1] 12 13 | 7 ] — —— —_e Note :

1. In column 5 - Letter "I" stands for Inside State and Letter "O" stands for Outside State. i) .In column 6 - Letter "D" stands for Dealer and letter "I" stands for Trader.

3. Only the letters I/O and D/ T are to be mentioned the prescribed columns. ia t a ) t ‘a il t i

PART IV-A] GUJARAT GOVERNMENT GAZETTE, EX., 31-03-2011

SCHEDULE Iil (See rule If (3)) Licensing Forms FORM LM-3 OFFICE OF THE CONTROLLER OF LEGAL METROLOGY, GUJARAT STATE Licence to manufacture weights, measures, weighing or measuring instruments. PHOTO Licence No... ieee NOGA costs ener enteeune neers

1. The Controller of Legal metrology hereby grants to ........-.......2.::::seeeeee (Name and address of party or partics) a licence to manufacture the following.- (Include details of the weights, measures, weighting instruments or measuring instruments that are licenced to be manufactured by the party). Weights | Measures Weighing Instruments Measuring instruments 2 The licence is valid for the party named above in respect of his workshop located at ................

3. Address of the office if different than workshop address -

6. The manufacturer shall comply with the conditions noted below. If he fails to comply with anyone of these, his licence is liable to be cancelled. es The trade mark monogram being used by the manufacturer ts as under. (Signature) Controller of legal Metrology (Seal) Gujarat State PSE pater eteeweenty Place ss Note : In the case of firm, its name with the names of all names of all persons having interest in the business should be given in paragraph 1. 33-36 GUJARAT GOVERNMENT GAZETTE, EX., 31-03-2011 [PART IV-A CONDITIONS OF LICENCE The person in whose favour this heence 1s issued shall. -

(a) Comply with all the relevant provisions of the Act and Rules for the time being in force;

(b) Not encourage or countenance any infringement of the provisions of the Act. or the Rules amended from time to time;

(d) Comply with any general or special directions that may be given by the Controller of legal metrology;

(e) Surrender the licence in the event of closure of business and/ or cancellation of Licence;

(f) Present the weights, measures, weighing or measuring instruments as the case may be manufactured and meant for use within the State, to the legal metrology officer for verification and stamping before sale;

(g) Submit the application for renewal of this licence as required under the rules within thirty days of expiry of the validity of the licence.

(h) Shall be haying tools and equipments in their production workshop as prescribed.

2. Every condition prescribed after the issue of this licence shall if notified in the Official Gazette, be binding on the persons to whom the licence has been granted. Renewal entries Koren Noe aes Bate e303. Current Noe... Date kc. Renewed for Renewed for Seal Seal Controller Controller of Legal Metrology of Legal Metrology Surrent Nocicnenthincts, Date ciiaa Current Now. ccc. Date 22sic..: Renewed for Renewed for Seal Seal Controller Controller of Legal Metrology of Legal Metrology SAUSTENC INO ui picaninuaerenee ANE esccsanssuvn CMETGHE NGS csccn.c bine COME Seema Renewed for Renewed for Seal Seal Controller Controller of Legal Metrology of Legal Metrology

PART IV-A] GUJARAT GOVERNMENT GAZETTE, EX., 31-03-2011 33-37

SCHEDULE Ul (eee rule if (3)) Licensing Forms FORM LR-3 OFFICE OF THE CONTROLLER OF LEGAL METROLOGY, GUJARAT STATE PHOTO Licence to repair weights, measures, weighing or measuring instruments. Licence No... .22...... OM tao. rcs atich of Pee cae

1. The Controller of Legal metrology hereby grants to ...........-----------ses1e (Name and address of party or parties) a licence to repair the following:- (Include details of the weights, measures, weighting instruments or measuring instruments that are licenced to be repaired by the party). ; Weights | Measures Weighing Instruments Measuring instruments re

2. The licence is valid for the party named above in respect of his workshop located at ................ os Address of the office if different than workshop address :

6. The repairer shall comply with the conditions noted below. If he fails to comply with anyone of these, his licence is liable to be cancelled. (Signature) Controller of legal Metrology (Seal) Gujarat State AE i eepereastten apse PURE po yr eeereeeees Note: In the case of firm, its name with the names of all names of all persons having interest in the business should be given in paragraph 1. La d ta d GUJARAT GOVERNMENT GAZETTE, EX., 31-03-2011 [PART [V-A CONDITIONS OF LICENCE ‘The person in whose favour this licence is issued shall, -

(a)

(b)

(c)

(d)

(c) () Comply with all the relevant provisions of the Act and Rules for the time being in force; and shall meet the basic minimum requirements tor licensee repairers as prescribed. Not encourage or countenance any infringement of the provisions of the Act. or the Rules amended from time to time; Exhibit this licence in some conspicuous part of the premises to which it relates; Comply with any general or special directions that may be given by the Controller of legal metrology; Surrender the licence in the event of closure of business and/ or cancellation of Licence: Present the weights, measures, weighing or measuring instruments as the case may be duly repaired to the Legal Metrology Officer for undertaking verification and stamping as specified in rule 14 before delivery to the user. Submit the application for renewal of this licence as required under the rules within thirty days of expiry of the validity of the licence. Every condition prescribed after the issue of this licence shall if notified in the Official Gazette, be binding on the persons to whom the licence has been granted. Renewal entries | Current No.........2..-.--. Date .......... Current No.............-... Date .......... Renewed for Renewed for Seal Seal Controller Controller of Legal Metrology of Legal Metrology Current No. gies Dates ao. Current No............-.... Date 2.2.2.2... Renewed for Renewed for Seal Seal Controller Controller of Legal Metrology of Legal Metrology | Cathet Netecccgecrsctesrcsy: ERB rerccvews Current Noie.i6ccceee- ens Date cee Renewed for Renewed for Seal Seal Controller Controller of Legal Metrology of Legal Metrology

PART IV-A] . GUJARAT GOVERNMENT GAZETTE, EX., 31-03-2011

SCHEDULE 1 (See rule df (3) Licensing Forms FORM LD-3 OFFICE OF THE CONTROLLER OF LEGAL METROLOGY, GUJARAT STATE Licence to a dealer in weights, measures, weighing or measuring instruments, Licence No___...-...... ta The Controller of Legal metrology hereby grants lO ...,...-....-0.2-2eeeeeneeeees (Name and address of party or parties) a licence to deal in the following:- 343-39 (Include details of the weights, measures, weighting instruments or measuring instruments). Weights _ Measures Weighing Instruments | Measuring instruments The licence is valid for the party named above in respect of his premises located at Address of branch office if any: ee ee ee Re ee ees Die dicerne is Vale TR cccgeeccrecawe RS peexccccaneesseae Details of employees Sr. | Nameof | Joining | Birth | Education Designation Monthly | EPF | Remarks No. | Employee | Date date | Qualification — Salary | No. | 2 3 4A | 5 6 < 8 9 | _ La The dealer shall comply with the conditions noted below. If he fails to comply with anyone of these, his licence is liable to be cancelled, (Seal) ENS este reageneeee Plates (Signature) Controller of legal Metrology Gujarat State Note: In the case of firm, its name with the names of all names of all persons having interest in the business should be given in paragraph 1. 33-40 GUJARAT GOVERNMENT GAZETTE, EX., 31-03-2011 [PART IV-A CONDITIONS OF LICENCE

1. The person in whose favour this licence is issued shall. - {a} Comply with all the relevant provisions of the Act and Rules for the time being in force;

(b) Not encourage or countenance any infringement of the provisions of the Act. or the Rules amended from time to time:

(d) Comply with any general or special directions that may be given by the Controller of legal metrology; (¢) Surrender the licence in the event of closure of business and/ or cancellation of Licence:

(2) Submit the application for renewal of this licence as required under the rules within thirty days of expiry of the validity of the licence.

2. Every condition prescribed after the issue of this licence shall if notified in the Official Gazette, be binding on the persons to whom the licence has been granted. Renewal entries Current Nowesci2iiseens Date scien Gurtent Bosscccasccncs Date enc. Renewed for Renewed for Seal Seal Controller Controller of Legal Metrology of Legal Metrology Current: N@scscacecivacaress Date ...cccs05. Cairent Nos ecu edabeosniscs Renewed for Renewed for Seal Seal Controller Controller of Legal Metrology of Legal Metrology Current Now.......0..0.060. Date .......... Current NO............e006 Date cca aceesas Renewed for Renewed for Seal Seal | Controller Controller of Legal Metrology || of Legal Metrology

PART IV-A] , GUJARAT GOVERNMENT GAZETTE, EX., 31-03-2011 33-41

SCHEDULE IV (See rule Ii (4) and 11 (3)) Office of Controller of Legal Metrology, Gujarat State Licencing and renewal fees for manufacturers of, or repairers of, or dealers in weights and measures Issue of licence / renewal of licence to: Fee per year

(i) Manufacturers Rs. 500/-

(11) Repairers Rs. 100/-

(111) Dealers Rs. 100/-

SCHEDULE V - (See rule I (6)) Office of Controller of Legal Metrology, Gujarat State Register of licenced Manufacturers/ Repairers’ Dealers of weights, measures, weighing / measuring instruments CHOOT tHe Ln. lene ed : — Ju cq — -—, rs To — = a mam oO a = 2 |¢% a 2 | & 8 Seles | 3 = = re -_ = = ow rs rai a = Ee a) Pr eS — 2 i a =F 2 4 Pye a = a i | = a = = tee o| “ D 2 oie | Seat tendered = a = a aS = haw! o Su a a 2 op Go oa) = ~~ Sw Es a = ao D o £ oom me] = o o ooo 5 r= oD cL 2 2 ae = a/ of a o Pe =| oe = 2] 2 =o = “a A 3 = oo 5 3 es an o = = = o Z| & 4/838) 2.4 a ee ee | ee | ay pee eae ea! = = = Qo oss go moa 5 oO wo Og a = oF a 8) Go| 5| 8e8|/ FR | 8S | 23) pSl2 | 2S] 23] 22) e i Se s| 2s eek ow! Fe] Ss fee Tete | S| s8| 2) 85s5| 22 |2ey Bs 82/2 | Bs) 28 8) BS] E Pies ed la oo oo pie a = = BR oo LF ogo} a oO S| Eel Ole Se ela e@ |aaeeee | os) ng) ase) a S| me | ut 3 4 4 6 7 & 9 10 i 12 13 Note: Column (5) does not apply to dealers; column (7) does not apply to repairers and dealers. 33-42 GUJARAT GOVERNMENT GAZETTE, EX., 31-03-2011 [PART IV-A

SCHEDULE ¥I1 See rule iis) Office of Controller of Legal Metrology, Gujarat State Security deposit to be made by licencee repairer Repairer of weights and measures including weighing Rs, 5000.00 and measuring instruments. I) 2) 4) 5(a) 5(b) 5(c) 3(d) 3(e) a(f)

SCHEDULE VIA (See rule LE(LL)) BASIC MINIMUM REQUIREMENTS FOR LICENCE HOLDERS The workshop of the repairer shall not be in a residential premises. The workshop should be having minimum 50 sq.m. areas and shall be preferably located on the ground floor or the basement. However, workshop will be permitted above ground floor if lifi is provided in working condition in the building, The present licensee repairers shall comply with this provision within a time frame of 12 months from the date of notification of this Rules. Minimum experience required : ‘The owner / partner in the repairer licence for repairing electronic balance class-11] _ and class-IV (load cell based technology) may be a diploma holder in Electronic / Electrical / Instrumentation Engineering in a government recognized institute. The skilled workers employed by him shall be holding Government recognized ITI electronic / electrical / instrumentation trade certificate. The owner / partner in the repairer licence for repairing electronic balance class-I and class-IT (magnet based technology) may be a diploma holder in Electrome / Electrical / Instrumentation Engineering in a government recognized institule. The skilled workers employed by him shall be holding Government recognized ITI electronic / electrical / instrumentation trade certificate. Also skilled workers having experience of more than | year as Service Engineer / Service Technician in the manufacturing company of such magnet based electronic balances will be preferable. However, in case the owner/partner does not have the prescribe dqualifications, an employee having such qualifications may be employed. All skilled workers of the licence holder will be issued a photo ID by the licence holder and hotographs will also be affixed in the licence itself. Only such authorised skilled workers can present the weights and measures to the concerned Legal Metrology Officer for verification and stamping. The equipments and machineries required for repairing mechanical weighing instruments shall be as per TABLE-A The equipments and machineries required for repairing electronic weighing instruments shall be as per TABLE-B All licencee repairers shall be required to keep loan sets as per TABLE-C for repairing of mechanical weighing instruments. All licencee repairers shall be required to keep loan sets as per TABLE-D for repairing of electronic weighing instruments. All licencee repairers shall be required to keep test weights and measures as per TABLE-E. All licencee manufacturers shall be required to keep tools and accessories as per TABLE-F in their production workshop,

PART IV-A] * GUIARAT GOVERNMENT GAZETTE, EX., 31-03-2011 33-43 TABLE-A UIPMENTS AND MACHINERIES REQUIRED FOR REPAIRING MECHANICAL WEIGHING INSTRUMENTS SR. NO. " PARTICULARS SIZE NOS. — SET l VISE 75 mm - ; 1 no. 100 mm | no. 7 2 SCISSOR. - 75 mm 7 | no. 100 mm L no, 3 SPANNER SET 410 12 mm 1 no. - 4 PLIER | 38 mm me 1 no. 5 FIX PLIER Medium 1 no. 6 ROUND FILE a 3mm if a 12 mm I no. t HALF ROUND FILE / smm 3 To! 12 mm 1 no. 8 | FLAT FILE 7 4mm | I no. 12 mm 1 no. 9 DISMISS (SCREW DRIVER) i 1 set 10 | BLOWSTOVE A 1No. II FLAT PUNCH | 10 to 38 mm i | set 7 no. 12 ROUND PUNCH - For 1 kg to 20 gram and for | 1 set 7 no. Th bullion weight and scale 13 / RECTANGULAR PUNCH For 5 keto 50 kilogram set 4 nos. 14 |NUMBERPUNCH-ENGLISH | 0109 1 set 19 nos. 15 HINDI TYPE For Kilogram and for series of | 1 no, each oram 16 | MELTING POT FOR MELTING OF | Medium 1 No. LEAD 17 | HACKSAW WITH BLADE ~ | 300 mm 1 No. 18 | EMERY STONE 300mm 1 No. 19 | WIRE BRUSH | | 2No. 0 ENGLISH LETTERS (A.B,C.D,| AtoZ CAPITAL ic 4 TYPE SET) PUNCH SET atoz SMALL. I set 21 HAND DRILL WITH SPANNER LA No. | 22 HA MMERS 200 | eram, 200 gram, 100 | 4 Nos. gram, 50 gram 2B LADLE SO 1 No. 24 |JACK FOR WEIGHBRIDGE| 1 No. PLATFORM ; 33-44 GUJARAT GOVERNMENT GAZETTE, EX., 31-03-2011 [PART IV-A TABLE-B LIST OF EQUIPMENTS AND MACHINERIES REQUIRED FOR REPAIRING ELECTRONIC WEIGHING INSTRUMENTS

(1) DIGITAL MULTI METER

(2) SOLDERING IRON

(3) DESOLDERING GUN

(4) SOLDERING WIRE

(5) NUMBER PUNCH SET - 0 to 9

(6) | NOSE PLIER AND PLIER

(7) SCREW DRIVER SET

(8) ALLEN KEY

(9) DRILL MACHINE

(10) | FLAT AND ROUND FILE SET

(11) BULLION WEIGHT BULLION FROM 1 KILOGRAM to 1 MILLIGRAM

(12) C.l. WEIGHTS — 20 KILOGRAM, 10 KILOGRAM, 5 KILOGRAM, 2 KILOGRAM to 500 GRAM

(13) HAMMER SET

(14) CUTTER

(13) SPANNER SET

(16) LEAD SEAL (SQUARE)

(17) SEAL WIRE

(8) ABCD TYPE SET (CAPITAL SET-1, SMALL SET-1) PUNCHES

PART IV-A] =: GUJARAT GOVERNMENT GAZETTE, EX., 31-03-2011 33-45 TABLE-C LIST OF EQUIPMENTS FOR ALL LICENSED REPATRERS SHALL BE REQUIRED TO KEEP LOAN SETS FOR REPAIRING OF MECHANICAL WEIGHING INSTRUMENTS.

(a) LICENCE FOR GUJARAT STATE

(1) SCALE-—C CLASS 100 KILOGRAM 1 NO 50 KILOGRAM | NO. 20 KILOGRAM | NO. 10 KILOGRAM I NO, 5 KILOGRAM 3 NOS. ? KILOGRAM 4 NOS. 1 KILOGRAM 4 NOS. TOTAL ; 15 SET

(2) WEIGHTS 500 GRAM 15 NOS, 200 GRAM 15 NOS 10 KILOGRAM 15 NOS § KILOGRAM 15 NOS. 20 KILOGRAM 15 NOS. TOTAL 75 NOS.

(3) CONICAL MEASURE 2 LITRE | NO. 1 LITRE | NO. 500 MILLILITRE I NO. 200 MILLILITRE | NO. 100 MILLILITRE 1 NO, TOTAL 5 NOS.

(4) DIPPING MEASURE 2 LITRE 1 NO. | LITRE 1 NO, 500 MILLILITRE LNO, 200 MILLILITRE 1 NO, 100 MILLILITRE | NO. 50 MILLILITRE | NO. 20 MILLILITRE 1 NO, TOTAL 7 NOS.

(5) CLOTH METER | NO,

(6) COUNTER MACHINE 2 KILOGRAM 5 NOS, 5 KILOGRAM 3 NOS. 33-46 (B) GUIARAT GOVERNMENT GAZETTE, EX,, 31-03-2011 LICENCE FOR A DISTRICT :

(1) SCALE —C CLASS

(2) WEIGHTS

(3) METER ie}

(4) CONICAL MEASURE

(5) DIPPING MEASURE

(6) COUNTER BALANCE C7} BULLION WEIGHTS ($) SCALE B CLASS 20 KILOGRAM 10 KILOGRAM 5 KILOGRAM | NO. 2 KILOGRAM I NO. 1] KILOGRAM 1 NO. TOTAL 20 KILOGRAM 10 KILOGRAM 5 KILOGRAM I NO, 2 KILOGRAM TO 50 GRAM WEIGHTS TOTAL CLOTH METER 1 LITRE NO. | 300 MILLILITRE 200 MILLILITRE 100 MILLILITRE TOTAL 1 LITRE 300 MILLILITRE 200 MILLILITRE 100 MILLILITRE TOTAL 2 KILOGRAM 3 NOS. 5 KILOGRAM 2 NOS. TOTAL 1 KILOGRAM TO [PART IV-A | NO. 1 NO, 5 NOS. | NO. I NO. 5 SETS 10 NOS. NO.1 NO.1 NO.] NO. 4 NOS. NO.1 NO.1 NO.1 NO] 4 NOS. 3 NOS. [MILLIGRAM —2 SET. 5 KILOGRAM 1 NO, | KILOGRAM 2 NOS. 500 GRAM 100 GRAM _ TABLE-D 2 NOS. 2 NOS. LIST OF EQUIPMENTS FOR ALL LICENSED REPATRERS SHALL BE REQUIRED TO KEEP LOAN SETS FOR REPAIRING OF ELECTRONIC WEIGHING INSTRUMENTS.

(1)

(2)

(3)

(4)

(3)

(6) 300 GRAM / 10 MILLIGRAM 5 KILOGRAM / 500 MILLIGRAM lO KILOGRAM / | GRAM 30 KILOGRAM / 2 GRAM 30 KILOGRAM 35 GRAM 30) KILOGRAM / 3 GRAM REPAIRER HAS TO KEEP MINIMUM OF ONE ELECTRONIC BALANCE EACH OF ABOVE AS LOAN SET.

PART IV-A] | GUJARAT GOVERNMENT GAZETTE, EX., 31-03-2011 33-47 TABLE-E LIST OF EQUIPMENTS FOR ALL LICENSED REPAIRERS SHALL BE REQUIRED TO KEEP TEST WEIGHTS AND MEASURES

(1) ELECTRONIC BALANCES FOR WEIGHT TESTING :

(1) 200 GRAM/ 1 MILLIGRAM

(2) 2KILOGRAM/ 10 MILLIGRAM

(3) 20KILOGRAM/ 100 MILLIGRAM

(4) 50 KILOGRAM /1GRAM

(2) WEIGHTS FOR TESTING OF ELECTRONIC BALANCE 20 KILOGRAM 4NO8. 10 KILOGRAM 2 NOS. 5S KILOGRAM - 2 NOS. 2 KILOGRAM 2 NOS. | KILOGRAM 2 NOS. 500 GRAM TO 1 GRAM 2 SET

(3) 2? KILOGRAM TO 20 MILLIGRAM BULLION WEIGHTS — ONE SET

(4) METER CLOTH METER

(3) CONICAL MEASURE 10 LITRE NO.1 5 LITRE © NO.1 2 LITRE NO.1 1 LITRE NO.1 500 MILLILITRE NOL1 200 MILLILITRE NO! 100 MILLILITRE NO.

(6) DIPPING MEASURE 2 LITRE NO.I 1 LITRE NO. 1 500 MILLILITRE NO. 200 MILLILITRE NO. 100 MILLILITRE NOI 50 MILLILITRE NO.1 20 MILLILITRE NO.1 33-48 GUJARAT GOVERNMENT GAZETTE, EX., 31-03-2011 [PART IV-A TABLE-F LIST OF TOOLS AND ACCESSORIES FOR THAT ALL THE LICENCEE MANUFACTURER SHALL BE REQUIRED IN THEIR PRODUCTION WORKSHOP.

(1) PORTABLE DRILL MACHINE

(2) BENCH TYPE DRILL MACHINE

(3) WELDING MACHINE

(4) PORTABLE DISC GRINDER

(5) BENCH GRINDER

(6) GAS CUTTING SET WITH PUG MACHINE

(7) MAGNET DRILL FOR WEIGHBRIDGE MANUFACTURING

(8) DIGITAL MULTI COLOUR

(9) SOLDERING IRON

(10) DESOLDERINGGUN

(11) SOLDERING WIRE

(22) NUMBER PUNCH SET AND ABCD PUNCH SET

(13) NOSE PLIER AND PLIER (i4) SET OF SCREW DRIVER

(15) ALLEN KEY SET

(16) DRILL MACHINE SPANNER SET

(17) FLAT AND ROUND FILE SET

(18) BULLION WEIGHT ~2kg TO 1 mg

(19) CL WEIGHTS — 20 KILOGRAM, 10 KILOGRAM, 5 KILOGRAM, 2 KILOGRAM TO 50 GRAM SET

(20) HAMMER SET

(21). CUTTER

(22) SPANNER SET

(23) LID SHEEL (SQUARE)

(24) SEAL WIRE

(25) WEIGHBRIDGE MANUFACTURER WILL HAVE TO FACILITATE OVERHEAD CRANE FOR MORE THAN 5 TON CAPACITY WEIGHBRIDGE

(26) TESTING WEIGHTS SHALL BE OF MINIMUM 1/4TH CAPACITY OF THE MAXIMUM CAPACITY OF WEIGHBRIDGE TO BE MANUFACTURED.

PART IV-A] | GUJARAT GOVERNMENT GAZETTE, EX., 31-03-2011 33-49

SCHEDULE VII (See rule £3) FORM LM-4 Register to be maintained by the manufacturers of weights and measurers. Ls Name and address of the manufacturer ............ccccce cue eeeaec errr eeeeeeeeececceees a Deseription of the: weight-Of MeASUEC ..:66.5.0cesss tee veetes ee dene stead Jivaat ieee 3- (i} No. of the manuiacturing licence). cca ei (i7) Date on which the licence was issued ...............--.2--2.222-2cse cesses esuens

(i) Period of validity of the HOGG... ccceccen neces tence cane veniene

4. Particulars of order, if any, suspending or revoking ......... the licence. (A) STOCK STATEMENT "Sr. No. Opening Stock il Quantity Total (2+3) Quantity sold Closing stock manufactured during the (4-5) during the month Lemont | l - 2 3 4 |<: 8 6 (B) TRANSACTION STATEMENT s = ~~ Details of Dealer Details of trader me 3 a Ss om fy Pa _ 22 Sy = 50 |s a Z SES | S38] 2 | szleas F % A a| & aa lee] 2 |e t|eeq % 2 8 g @1/24| & ne |e u = ™—™ 2 io oe . x g La r t) al = . py = —_ | _ = = =) a) n=! Cy ag} er, Oo} 8s 6 os S| 4) 2/4) 2 |e] gs oo = oa = = PL = iE Es an 2 4 = a & A oe 1 2 3 4 5 6 4 8 9 10 11 12 | 13 Note ; In column 5 - Letter "1" stands for Inside State and Letter "O" stands for Outside State. In column 6 - Letter "D" stands for Dealer and letter "IT" stands for ‘Trader Only the letters 1 /O and D/ T are to be mentioned the prescribed columns. - Tt is mandatory to provide the above details every quarter in the form of an online return alongwith the signed paper copy to the concerned office. 43-50 GUJARAT GOVERNMENT GAZETTE, EX., 31-03-2011 [PART IV-A Schedule VIT (See rule /3) FORM LR-4 Register to be maintained by the repairer in respect of weights, Measures Name and address of the repairer .................... Licence No,...........02++++- Date of Licensing ....22-2c0cc REPAIRER RETURN Details of user - Details of S A 2 3 2 weights / = = = measures / zn 3 oo a‘ = = = Instruments Lo 3 = = en ; = | | = a ra 2 en . 5 oo é 8 ¢ - |og| oP 2 | Ae = Zz | 3 Z £ | eO}] Bec 38/4/22 2 & o ue 7 Et 2c 4 ee ae2/m oO = ot o a =I im = 5 o © e oS a) c pe = e = at a Beas w | 3° 5 a “4 = ~ = ~~ 5 - a ee a J 2 = o wa Bo « = cs = + Z o = 4 o & a 2 = | > aes a a oe a ao 3 a LL] 4 LE ou « = ce > | 2 3 + 3 6 ef $ 9 1) I | [2 13 *. It is mandatory to provide the above details every quarter in the form of an online return alongwith the signed paper copy to the concerned office. In column 5 - Letter "I" stands for Inside State and Letter "O" stands for Outside State. In column 6 - Letter "D" stands for Dealer and letter "I" stands for Trader Only the letters I/O and D/T are to be mentioned the prescribed columns.

PART TV-A] GUIARAT GOVERNMENT GAZETTE, EX., 31-03-2011 33-51. Schedule VII (See rule 73) FORM LD-4 Register to be maintained by dealer in weights and measures. 1- Name and address of the dealer ........... 2 Description of the weight of miGasune., icsccesiessincecdedews ee etapees ease ese edad 3- (7) Dealerheemce Now cacti aie i

(ii) Date on which the licence was issued .......0.0.00....002 20.2 .0cceeceeeceeee oreo HiT Periga ot Vali OF NGRHCE sccencucceadeeecoreanniasneiaenvenweyetiaanuawanwesy

4. Particulars of order, if any suspending Of iiiiiisccieciiswiiinieicc aca Revoking the licence. 5- Category of weight or measure ..........0. 0.0.00 c cece cece cece eee ereeeeeeseneereans (Category A or B) (A) STOCK STATEMENT or. No. Opening Stock Quantity sold Closing, stock — | during the (2-3) | month _ ] 2 oe 4 | (B) TRANSACTION STATEMENT [ : a ty Y & Details of Dealer Details of trader 5 ae ~~ [a 3S | 2 g_| ac ; 3 & ) a > 5 O75 “ a oO “ & | ii = ‘ = = A a a os ae Pray :, e(27S2 |2 |ee] 36°] 3 » |2 |e |2 |S )|z : wo =, a | Oe 2 = 7c z a a oO al 2 o Sa | as 5 7G = = ap 3 |S a Pe [ee pee eee Tg i | 2 3 4 | 6 7 8 9 10 | 12 | 13 is aia eee eae Piensa opin, Note: 33-52 GUJARAT GOVERNMENT GAZETTE, EX., 31-03-2011 [PART IV-A Schedule VITI (See rule 16 (3)) Office of the Controller, legal metrology, Gujarat State Certificate of verification Name of Legal Metrology Offtoer ...............ceceeenereeeeee eee eeeeeeeseseeseeters NOLL ees 1 hereby certify that I have this day verified and stamped / rejected the under mentioned weights, measurers, etc. Belongs (Ose ea Tigray socenccacaie eee. Ration Card No. / Voter ID No. f PAN No. wu... eesseeesneerescccecececoeeeceeesbiecusaaabananesaarens | Quantity | Denomination ~ Weigh ing instruments Py > Carriage, z = = | = 6 6|2 = oe conveyance #| §| 9 z 5 2 e| 838 °

2. s | 3S Ble e@la@s -¢| Se : = adjusting = = = a oh oles ey |e 2 e ge | a o es aed oe & | charges ete. <a he 3 els | a |e 8 9 10 Total Rs. ........ deposited vide T. Receipt’ Money receipt No. ...... dated ...........+. Last il, Woe and: Gate ts 4 a Repaired by/ Used by PE Seas ackipid inte aecatea (Signature) Next verification due on .............-+-. Legal Metrology Officer Note:-

(1) The trader / user can present his weights and measures directly to the Legal Metrology Officer also.

(2) In the case of rejected weights, measures, etc the legal metrology officer shall give separate Certificate of rejection mentioning the reasons of rejection against each item. 2ARTIV-A] Fee payable for verification and Stamping of Weights and Measures and Weighing and Measuring lngtruments

SCHEDULE IX (See rule 17) GUJARAT GOVERNMENT GAZETTE, EX., 31-03-2011

1. (a) Bullion Weights: Denomination - Fee per piece (Rs.)

(1) (2) 10 Ke. i 30.00 5 Kg. 20.00 2 Kg. 20.00 | | Kg. = 20.00 500g. 15.00 200 ¢. 15.00 100 8. 15,00 50 g, 15.00 20 g. i 15.00 10g, 15.00 po : 5g, 15.00 ie OO 15.00 ig 15.00

(b) Carat Weights: = 1002 (500 c) 20.00 402 (200¢) i : 20.00 202 (100 ¢) 20.00 "108 (506) 20.00 4g (200) / 20.00 22 (10 ¢) 20.00 lg (5c) 20.00 400mg (2c) 20.00 200mg (1c) 90.00 100mg (0.5 ¢) 20.00 i. 40me (0.02 c) 20.00 20mg (0.01 ¢) 20,00 : 10mg (0.05 ¢) 20.00 dmg (0.02c) 20.00 Img (0.01 ¢) 20.00 Img (0.005¢) 20,00 fa a t h l a g 43-54

(c) Cylindrical knob type weights: GUJARAT GOVERNMENT GAZETTE, EX., 31-03-2011 [PART IV-A Denomination Fee per piece (Rs.} aa (1) (2) - 10 Ke, 20.00 5 Kg, 20.00 2Kg. 15.00 1 Kg. 10.00 500g. 500 ; 200 g. «5.00 100 ¢. 5.00 50g. 5.00 20 2 ; 5.00 10g. 5.00 - 5g. 5.00 yes amegell 2g. 5.00 | ig 5.00

(d) Sheet metal Weight (other than Bullion) Denomination Fee per piece (Rs.} Lo (1) (2) _ 500 ma. 2.00 | 200 mg. 7 5.00 | 100mg. 5.00 | $0 mg. 5.00 — 20 mg, 5.00 10 meg. 5,00 5 mg, 6,00 2 mg. - ; 5.00 1 mg. 5.00

(e) Iron hexagonal, knob type weights and parallelepiped weights: Denomination Fee per piece (Rs.) Qo (2) 50 Kg. 25.00 20Kg. 20.00 10 Kg. 20.00 5Kg ; 20.00 2Kg. 15.00 | Kg. 10.00 500 8. 5.00 " — 200g. 5.00 = 100 g. 5.00 50 g. 5.00 208 5.00 le = =—ti<‘i‘SCsSdYSCS ; 5.00 oe 5g 5.00

5.00 e y 72 te r 5.00

PART IV-A] - GUJARAT GOVERNMENT GAZETTE, EX., 31-03-2011

(f) Standard weights for testing of high capacity weighing machines: Z: ay

(a) | 33-35

(1) Denominations Fee corresponding to Max Fee corresponding to Max permissible relative error permissible relative error

0.5/10000 in Rs. 3,3/10000, 1.7/10000 and |.0/10000 in Rs. -100ke 75.00 = 50.00 200kg 150.00 100.00 500ka_ | 300.00 200.00 1000ke 750.00 500.00 2000ke 1500.00 1000.00 5000ke / 3000.00 2000.00 Capacity Measures: | Denomination Fee per piece (Rs.}

(2) 100 litre ‘andl above Rs. 50 for the Ist 100 litre plus Rs, 7 for every additional 100 litre or part thereof subject to maximum of Rs. 5000.

0.5 m, araduated (at every cm) 501 50.00 201 20.00 “101 cL 20.00 51 10.00 21 7 10.00 11 | 10.00 : 500 ml 10.00 7 200 ml i 10.00 100ml 10,00 i 50 mi 10.00 20 ml ' 10,00 [0 mi =" 10.00 5 ml “10.00 2 ml _ 10.00 | ml 10.00 Length Measures: Non-Flexible — ts Denomination r Fee per piece (Rs.) . =

(1) CAs iin 2 ™. 10.00 im, 10.00

0.5m, 20,00 1m. wraduated {at every cm) 20.00 __1m, graduated (at every cm) aa a Fabric Plasti

Gujarat Legal Metrology (Enforcement) Rules, 2011

The enactment

Full text

Find the provision, not just read it