(1) Amenity open space in Industrial use; In every industrial zone minimum 5 per: cent open 3 per cent parking, 2 percent amenities of the total area shall be reserved as open space. Open spaces may be used for such purposes as may be approved by the Agency.
(2) 0 Open space in Industrial plots; In industrial plots measuring· 1000 square meters or more, 10 perc_ent of the total area shall be provided as an amenity open space . Such an amenity open space · shall have a means of access. and shall be so located that it would • be conveniently utilised by the persons working in the industry.
(3) Development norms for Industrial plot shall be as follows:- Norm for Industrial Plots Sr. Minimum Plot Area Max. Minimum MOS Max ..
No Ground in meters Floor Areai Coverage Front Side/ Rear Ratio in% Side (FAR) 1 2 3 4 s 6· 7 1 Upto 0.045 Hect. 60 3.20 2.10 / 2.10 1.25 .2.10 2 More than 0.045 Hect. 60 4.50 3.00 / 3.00 1.25 and upto 0.10 Hect. 3.00 3 More than 0.10 Hect. and 60 7.50 3.75 / 4.50 1.00 upto 0.20 Hect. 3.75 Sr.
No 1 4 s 6 7 8 9 10 'J:f~~, ~ 14'J:ffil 2016 222 (215) Minimum Plot Area Max. Minimum MOS •· Max$ Ground in meters Floor Area Coverage Front Side/ Rear Ratio in% Side (FAR) 2 3 4 s 6 7 . More than 0.20 Hect. and 60 9.00 . 4.50/ 4.50 1.00 upto 0.50 Hect 4.50 More than 0.50 Hect. and 60 12.0 6.00 I 6.00 1.00 upto 0.75 Hect 6.00 More than 0. 75 Hect. and 60 15 1.50 I 7.50 1.00 upto 1.00 Hect 7.50 More than 1.00 Hect. and 60 18 9.00 I 9.00 1.00 upto 1.25 Hect 9.00 More than 1.25 Hect. and 60 21 10.50/ 10.50 1.00 upto 2.00 Hect 10.50 More than 2.00 Hect. 60 24 12.00/ . 12.00 1.00
12.00 ForFlatted Industries Minimum Plot Area 1500 50 12 7.50 / 7.5 1.50 Sq.m (0.15 Hect.) 7.50 . .
1. MOS mentioned in column No. 4, 5 and 6 are minimum. In case of industrial building of more than one floor, Front MOS shall be equal to half of the proposed height of building, similarly other side MOS shall be equal to one third of the.proposed height of building.
2. • Hazardous Industries and/ Polluting Industries or Industries • which require sanction under Factory Act, clearances shall have to be obtained under Industrial Health and Safety and/ • or under Environment Protection Act as the case may be.
3. For electronic/ IT based industries maximum FAR permissible shall be 25% extra than the existing FAR.