(1) The Rajasthan Standard of Weights and Measures (Enforcement ) Rules, 1997 (herein under referred to as the said rules) are hereby repealed:
Provided that such repeal shall not affect,-
(a) the previous operations of the said rules or anything done or omitted to be done or suffered therein; or
(b) any right, privilege, obligation or liability acquired, accrued or incurred under the said rules; or
(c) any penalty, forfeiture or punishment incurred in respect of any offence committed against the said rules; or
(d) any investigation, legal proceedings or remedy in respect of any such right, privilege, obligation, liability, penalty, forfeiture or punishment as aforesaid and any such investigation, legal proceedings or remedy may be instituted, continued or enforced and any such penalty, forfeiture or punishment may be imposed as if the said rules had not been rescinded.
(2) Notwithstanding such repeal anything done or any action taken or purported to have been done or taken including approval of letter, exemption granted, fees collected, any adjudication, enquiry or investigation commenced, licence and registration of manufacturers, dealers, importers of weights and measures, non-standard weights and measures or show cause notice, decision, determination, approval, authorisation issued, given or done under the said rules shall if in force at the commencement of the said rules continue to be in force and have effect as if issued, given or done under the corresponding provisions of these rules.
(3) The provisions of these rules shall apply to any application made to the State Government under the said rules for Hkkx 4 ¼x½ jktLFkku jkt&i=] ebZ 4] 2011 19¼73½ licence, registration of manufacturers, importers, dealers, repairers of weights and measures pending at the commencement of these rules and to any proceedings consequent thereon and to any registration granted in pursuance thereof.
(4) Any legal proceeding pending in any court under the said rules at the commencement of these rules may be continued in that court as if these rules had not been framed.
(5) Any appeal preferred to the State Government under the said rules and pending shall be deemed to have been made under the corresponding provisions of these rules.
SCHEDULE – I (See rule 10) Exceptions referred to in Rule 10 1- The following commodities may be sold by weight, measure or number as shown against the commodity.
TABLE --------------------------------------------------------------------------------- Sr. No. Commodity Whether declaration to be expressed in terms of weight, measure or number or two or more of them.
(1) (2) (3) --------------------------------------------------------------------------------- 1- Aerosol products weight 2- Acids in liquid form weight or Volume 3- Compressed or liquefied weight and equivalent gas (but not liquefied volume at stated temperature petroleum gas and pressure 4- Butter (incl. peanut butter), weight cheese, curd, ghee 5- Electric cables length or weight 6- Electric wire length or weight 7- Fencing wire length or weight 8- Hair oil, un perfumed weight or volume 9- Fruits and vegetables number or weight 19¼74½ jktLFkku jkt&i=] ebZ 4] 2011 Hkkx 4 ¼x½ 10- Furnace oil weight or volume 11- Linseed oil and other weight or volume vegetable oils 12- Heavy residual fuel oil weight 13- Industrial diesel fuel volume 14- Honey, malt extract, golden weight syrup treacle 15- Ice cream and other similar weight or volume frozen products 16- Liquid chemicals weight or volume 17- Liquid petroleum gas weight 18- Nails, wood screws number or weight 19- Paint (other than paste paints volume or solid paint), varnish and varnish stairs, enamels 20- Papad number and weight 21- Paste paint, solid paint weight 22- Ressogulla, Gulabjamun weight and other sweet preparations 23- Ready made garments number and size 24- Sauce, all kinds weight 25- Tyres and tubes number 26- Yarn Weight or length of yarn ---------------------------------------------------------------------------------
SCHEDULE - II - A [See rule 11 (1)] Form–LM–1 [Application form for licence as manufacturer of weights & measures under the Legal Metrology Act, 2009] To, To be filled by the Comments of the Applicant inspecting officer
(1) (2) (3)
1. Name of the manufacturing concern for which licence ...............
is desired.
Hkkx 4 ¼x½ jktLFkku jkt&i=] ebZ 4] 2011 19¼75½
2. Complete address of the concern. Whether premises ...............
are owned/rented/taken on lease/leave licence, duly supported by documents.
3. Date of Establishment of workshop/factory .................
4. Name (s) and address (s) along with their father's/ .................
husband's name of proprietor (s) and/or Partners and Managing Director (s) in the case of Limited company
5. The date and current registration number of factory/ .................
shop/establishment/Municipal Trade licence.
6. Nature of manufacturing activities at present .................
7. The type of weights and measures proposed to be .................
manufactured viz :
(i) Weights
(ii) Measures
(iii) Weighing Instruments
(iv) Measuring Instruments with details in each case.
8. The number of persons employed/proposed to be employed ....................
(i) Skilled
(ii) Semi-skilled
(iii) Unskilled
(iv) Specialist trained in the line
9. The monogram or trade mark intended to be imprinted on weights and ...................
measures to be manufactured.
10. Details of machinery, tools accessories, owned and .................
used for manufacturing weights measures etc.
11. Details of foundry/workshop facilities arranged ....................
Whether ownership, long term lease etc.
12. Facilities of steel casting and hardness testing of ....................
vital parts etc. or other means.
13. Availability of electric energy ....................
14. Details of loan received from Government or financial Institution. If so, give details .....................
15. Name of bankers, if any .....................
19¼76½ jktLFkku jkt&i=] ebZ 4] 2011 Hkkx 4 ¼x½
16. VAT/ Sales Tax Registration Number/CST Number/.................
Professional Tax registration Number/IT Number.
17. Have you applied previously for a manufacturer's ..................
licence ? If so, when and with what results ?
18. (a) Whether the item (s) proposed to be ......................
manufactured will be sold within the State or out side the state or both.
(b) Details of Model Approval received from Government of India;
(c) When can you produce for inspection samples of your products for which licence is desired ?
To be certified by the applicant (s) Certified that I/We have read the Legal Metrology Act, 2009 and the Rajasthan Legal Metrology (Enforcement) Rules, 2011 and agree to abide by the same and also the administrative orders and instructions issued or to be issued there under.
I/We agree to deposit the Scheduled licence fees with Government as soon as required to do so by the Licencing Authority.
All the information furnished above is true to the best of my/our knowledge.
Place : ...................................
Date : Signature and Designation To be filled in by Departmental Officer of the State Government Date of Receipt of Application :
Serial Number of application :
Date of inspection :
Recommendation of Inspecting Officer :
Place : ...................................
Date : Signature and Designation of Inspecting Officer Hkkx 4 ¼x½ jktLFkku jkt&i=] ebZ 4] 2011 19¼77½ Final orders of Licensing Authority Licence granted/refused :
Licence Number :
Valid till :
Place : ...................................
Date : Signature and Designation Form LR–1 [Application for licence as repairers of Weights & Measures under the Legal Metrology Act, 2009] To, To be filled by Comments of the the applicants inspecting officer 1 2 3
1. Name of the concern seeking the licence. ..................
2. Complete address of the workshop ....................
3. (a) Whether premises are owned/rented/taken. on ...................
(b) Date of establishment.
4. Name (s) and address (s) along with their father's/ ..................
husband's name of proprietor (s) and/or Partners and Managing Director (s) in the case of Limited company.
5. Number and date of shop/establishment/current .....................
Municipal Trade Licence.
6. Professional Tax/IT Tax registration Number etc if any. ........
7. The type of weights and measures proposed to repaired. ........
8. Area in which you wish to operate ...........................
9. Previous experience in the line ...........................
10. Number of staff employed or proposed to be employed: ...........................
(i) Skilled
(ii) Semi-skilled
(iii) Unskilled
(iv) Employees trained in the line 19¼78½ jktLFkku jkt&i=] ebZ 4] 2011 Hkkx 4 ¼x½
11. Details of machinery/tools/accessories available ...................
12. Availability of electric energy ......................
13. Have you sufficient stock of Loan Sets/Test weights.
etc.?.............Give details.
14. Have you applied previously for a repairer's licence? .......................
If so, When and with what results ?
To be certified by the applicant(s) Certified that I/We have read the Legal Metrology Act, 2009 and the Rajasthan Legal Metrology (Enforcement) Rules, 2011 and agree to abide by the same and also the administrative orders and instructions issued or to be issued there under.
I/We agree to deposit the Scheduled licence fees with Government as soon as required to do so by the Licensing Authority.
All the information furnished above is true to the best of my/our knowledge.
Place : ...................................
Date : Signature and Designation To be filled in by Departmental Officer of the State Government Date of Receipt of Application :
Serial Number of application :
Date of inspection :
Recommendation of Inspecting Officer :
Place : ...................................
Date : Signature and Designation of Inspecting Officer Final orders of Licencing Authority licence granted/refused :
licence Number :
Valid till :
Place : ...................................
Date : Signature and Designation Hkkx 4 ¼x½ jktLFkku jkt&i=] ebZ 4] 2011 19¼79½ Form LD-1 [Application Form for Licence as Dealers in Weights & Measures under the Legal Metrology Act, 2009] To, To be filled by Comments of the the applicant inspecting officer 1 2 3
1. Name of the establishment/shop/person ..........................
seeking the licence.
2. Complete address of the establishment etc...............................
3. Date of establishment ..................................
4. Name (s) and address (s) of proprietors and /...........................
or partners and Managing Director (s) in the case of Limited company.
5. Number and date of Registration ...............................
Number of current shop/establishment/ Municipal Trade licence.
6. Categories of weights and measures sold/proposed .................
to be sold at present.
7. Registration Number of VAT/CST/Sales Tax/ .....................
Professional Tax/Income Tax.
8. Do you intend to import weights, etc. from places...................
outside the State/Country ? If so indicate sources of supply. (Give details of manufacturer's trade mark/ monogram and his licence number) and provide
(a) Registration of Importer of Weights and Measures, if any
(b) Approval of model imported into India by Central Government.
9. Have you applied previously for a dealer's ............................
licence, either in this State or elsewhere ?
If so give details ?
19¼80½ jktLFkku jkt&i=] ebZ 4] 2011 Hkkx 4 ¼x½ To be certified by the applicant(s) Certified that I/We have read the Legal Metrology Act, 2009 and the Rajasthan Legal Metrology (Enforcement) Rules, 2011 and agree to abide by the same and also the administrative orders and instructions issued or to be issued there under.
I/We agree to deposit the Scheduled licence fees with Government as soon as required to do so by the Licensing Authority.
All the information furnished above is true to the best of my/our knowledge.
Place : ...................................
Date : Signature and Designation To be filled in by Departmental Officer of the State Government Date of Receipt of Application :
Serial Number of application :
Date of inspection :
Recommendation of Inspecting Officer :
Place : ...................................
Date : Signature and Designation of Inspecting Officer Final orders of Licensing Authority licence granted/refused :
licence Number :
Valid till :
Place : ...................................
Date : Signature and Designation Hkkx 4 ¼x½ jktLFkku jkt&i=] ebZ 4] 2011 19¼81½
SCHEDULE- II-B [See rule 11 (2)] Form LM-2 [Application for renewal Licence as Manufacturer of Weights & Measures under the Legal Metrology Act, 2009] To, To be filled by Comments of the the applicants inspecting officer 1 2 3
1. Name and complete address of the manufacturing...................
concern for which renewal of licence is desired.
2. Manufacturing Licence No...............................
3. Name (s) and address (s) along with their father's/ .................
husband's name of proprietor (s) and/or Partners and Managing Director (s) in the case of Limited company.
4. (a) Type of weights and measures which are .......................
manufactured as per licence granted.
(b) Do you propose any change...................................
5. The monogram or trade marks used ..................................
on weights and measures manufactured by you.
6. Details of workshop facilities available .................................
7. Details of production and sales in ..................................
the last 5 years
8. Number and date of shop/establishment .........................
Registration Number.
9. Registration Number of VAT/Sales Tax/CST/Professional Tax/Income Tax.
To be certified by the applicant (s) Certified that I/We have read the Legal Metrology Act, 2009 and the Rajasthan Legal Metrology (Enforcement) Rules, 2011 and agree to abide by the same and also the administrative orders and instructions issued or to be issued there under.
19¼82½ jktLFkku jkt&i=] ebZ 4] 2011 Hkkx 4 ¼x½ I/We have deposited the Scheduled licence fees of Rs. ........................... (Rupees .......................................) to the Sub- Treasury/Bank on ...................................................... and the original challan is enclosed.
All the information furnished above is true to the best of my/our knowledge.
Place : ...................................
Date : Signature and Designation Form LR-2 [Application for renewal Licence as repairer of Weights & Measures under the Legal Metrology Act, 2009] To, To be filled by Comments of the the applicants inspecting officer 1 2 3
1. Name and complete address of the ...............................
repairing concern/person seeking renewal of the licence .
2. Repairer's Licence Number ...................................
3. Name (s) and address (s) along ..................................
with their father's/husband's name of proprietor (s) and/or Partners and Managing Director (s) in the case of Limited company.
4. Registration Number and date of current shop/........................
establishment/Municipal Trade Licence.
5. Registration Number of VAT/ Sales Tax/CST/Professional Tax/Income Tax.
6. (a) The Type of weights and measures repaired...................
as per licence granted.
Hkkx 4 ¼x½ jktLFkku jkt&i=] ebZ 4] 2011 19¼83½
(b) Do you propose any change.................................
7. Area in which you are operating............................
8. Have you sufficient stock of loan/test weights, etc.?...............
9. Please give details with particulars of stamping......................
To be certified by the applicant (s) Certified that I/We have read the Legal Metrology Act, 2009 and the Rajaasthan Legal Metrology (Enforcement) Rules, 2011 and agree to abide by the same and also the administrative orders and instructions issued or to be issued there under.
I/We have deposited the Scheduled licence fees of Rs. ........................... (Rupees .......................................) to the Sub- Treasury/Bank on ...................................................... and the original challan is enclosed.
All the information furnished above is true to the best of my/our knowledge.
Place : ...................................
Date : Signature and Designation Form LD-2 [Application for renewal Licence as Dealer in Weights & Measures under the Legal Metrology Act, 2009] To, To be filled by Comments of the the applicants inspecting officer 1 2 3
1. Name of the establishment/shop/person seeking the................
renewal of licence .
2. Dealer's Licence Number .................................
3. Date of establishment .................................
4. Name (s) and address (s) along with ................................
19¼84½ jktLFkku jkt&i=] ebZ 4] 2011 Hkkx 4 ¼x½ their father's/husband's name of proprietor (s) and/or Partners and Managing Director (s) in the case of Limited company.
5. Registration Number and date of ..................................
shop/establishment/ current Municipal Trade Licence.
6. Categories of weights and measures sold at present ..................................
7. Registration Number of VAT/ CST/ ..................................
Sales Tax/Professional Tax/Income Tax.
8. Are you intending to import weights ..................................
and measures etc. from places outside the State/Country? If so, indicate sources of supply from the State (s)/Country (s).
(Give details of manufacturer's trade mark/ monogram and his licence number.)
To be certified by the applicant (s) Certified that I/We have the Legal Metrology Act, 2009 and the Rajasthan Legal Metrology (Enforcement) Rules, 2011 and agree to abide by the same and also the administrative orders and instructions issued or to be issued there under.
I/We have deposited the Scheduled licence fees of Rs.
........................... (Rupees .......................................) to the Sub- Treasury/Bank on ...................................................... and the original challan is enclosed.
All the information furnished above is true to the best of my/our knowledge.
Place : ...................................
Date : Signature and Designation.
Hkkx 4 ¼x½ jktLFkku jkt&i=] ebZ 4] 2011 19¼85½
SCHEDULE - III [See rule 11 (3)] Licensing Forms FORM LM-3 Government of Rajasthan OFFICE OF THE CONTROLLER OF LEGAL METROLOGY Licence to manufacture, weights, measures, weighing or measuring instruments.
Licence No…………. Year ………………..
1- The Controller of Legal metrology hereby grants to ……… (Name and address of party or parties) a licence to manufacture the following:- (Include details of the weights, measures, weighting instruments or measuring instruments that are licenced to be manufactured by the party).
2- The licence is valid for the party named above in respect of his workshop located at …………….
3- This licence is valid from ……………… to ……………..
4- The manufacturer shall comply with the conditions noted below. If he fails to comply with anyone of these, his licence is liable to be cancelled.
5- The trade mark monogram being used by the manufacturer is as under.
…………………… (Signature) Controller of legal Metrology (Seal) Govt. of Rajasthan Date ………………..
Place ………………..
Note: In the case of firm, its name with the names of all names of all persons having interest in the business should be given in paragraph 1.
19¼86½ jktLFkku jkt&i=] ebZ 4] 2011 Hkkx 4 ¼x½ CONDITIONS OF LICENCE
1. The person in whose favour this licence is issued shall,-
(a) comply with all the relevant provisions of the Act and rules for the time being in force;
(b) not encourage or countenance any infringement of the provisions of the Act. or the rules as amended from time to time;
(c) exhibit this licence in some conspicuous part of the premises to which it relates;
(d) comply with any general or special directions that may be given by the Controller of Legal Metrology;
(e) surrender the licence in the event of closure of business and/ or cancellation of Licence;
(f) present the weights, measures, weighing or measuring instruments, as the case may be, manufactured and meant for use within the State, to the Legal Metrology Officer for verification and stamping before sale;
(g) submit the application for renewal of this licence as required under the rules within thirty days of expiry of the validity of the licence.
2. Every condition prescribed after the issue of this licence shall if notified in the Official Gazette, be binding on the persons to whom the licence has been granted.
Renewal entries Current No……. Date ……….
Renewed for Controller of Legal Metrology Current No…….. Date ….
Renewed for Controller of Legal Metrology Current No…….. Date .....….
Renewed for Controller of Legal Metrology Current No…….. Date …..
Renewed for Controller of Legal Metrology Seal Seal Seal Seal Hkkx 4 ¼x½ jktLFkku jkt&i=] ebZ 4] 2011 19¼87½ Current No…….. Date ……….
Renewed for Controller of Legal Metrology Current No…….. Date ....… Renewed for Controller of Legal Metrology Licencing Forms FORM LR-3 GOVERNMENT OF RAJASTHAN OFFICE OF THE CONTROLLER OF LEGAL METROLOGY LICENCE TO REPAIR WEIGHTS, MEASURES, WEIGHING INSTRUMENTS OR MEASURING INSTRUMENTS Licence No ………. Year ……… 1- The Controller of legal metrology hereby grants to ...……...
(Name and address of Party or Parties) a licence to repair the following:- (Include details of the types of weights, measures, weighing instruments or measuring instruments that are licenced to be repaired by the party) 2- The licence is valid for the party named above in respect of his workshop located at …………….
3- This licence is valid from ………….. to ….. …………… 4- The repairer shall comply with the conditions noted below.
If he fails to comply with any one, his licence is liable to be cancelled.
5- The party is licenced to repair weights, measures, weighting and measuring instruments in the areas mentioned below - (Signature) Controller of Legal Metrology Govt. of Rajasthan (Seal) Date:
Note: In the case of firm, its name with the names of all persons having any interest in the business should be given in paragraph (1).
Seal Seal 19¼88½ jktLFkku jkt&i=] ebZ 4] 2011 Hkkx 4 ¼x½ Conditions of Licence
1. The person in whose favour this licence is issued shall, -
(a) comply with all the relevant provisions of the Act and rules for the time being in force;
(b) not encourage or countenance any infringement of the provisions of the Act or the rules for the time being in force;
(c) exhibit this licence in some conspicuous part of the premises to which it relates;
(d) comply with any general or special directions that may be given by the Controller of Legal Metrology;
(e) surrender the licence in the event of closure of business and/or cancellation of Licence;
(f) (i) Present the weights, measures, weighing or measuring instruments as the case may be duly repaired to the Legal Metrology Officer for under taking verification and stamping as specified in sub-rule (1) of rule 14, before delivery to the user.
(ii) In the case of weights, measures weighing or measuring instruments, if they are serviced/repaired before the date on which the verification falls due and where, in the process and the verification stamp of the Legal Metrology Officer is defaced, removed or broken, they shall be presented duly repaired to the Legal Metrology Officer for re-verification and stamping before delivery to the user.
(g) submit the application for renewal of this licence as required under the rules within ninety days of expiry of the validity of the licence.
2. Every condition prescribed after the issue of this licence shall, if notified in the Official Gazette, be binding on the persons to whom the licence has been granted.
Renewal Entries Current No……. Date …….
Renewed for Controller of Legal Metrology Current No………. Date…….
Renewed for Controller of Legal Metrology Seal Seal Hkkx 4 ¼x½ jktLFkku jkt&i=] ebZ 4] 2011 19¼89½ Current No……….. Date …… Renewed for Controller of Legal Metrology Current No…….. Date …….
Renewed for Controller of Legal Metrology Licencing form FORM – LD- 3 Government of Rajasthan Office of the Controller of Legal Metrology Licence to a dealer in weights, measures, weighing instruments or measuring instruments Licence No. …….. Year …………..
1- The Controller of Legal Metrology hereby grants to …………………………… (Name and address of party or parties) a licence to deal in the following (Indicate details of the types weights and measures, weights, or measuring instruments that are licenced to be dealt with by party) 2- The licence is valid for the party named above in respect of his premises located at 3- This licence is valid form ……………. To. …………….
4- The dealer shall comply with the conditions noted below. If he fails to comply with any one of those his licence is liable to be cancelled.
(Seal) (Signature) Date ………………. Controller of Legal Metrology Government of Rajasthan Place………………. Date Note: In the case of firm its name with the names of all persons having any interest in the business should be given in paragraph (1).
Seal Seal 19¼90½ jktLFkku jkt&i=] ebZ 4] 2011 Hkkx 4 ¼x½ CONDITIONS OF LICENCE
1. The person in whose favour this licence is issued shall, -
(a) comply with all the relevant provisions of the Act and rules for the time being in force;
(b) not encourage or countenance any infringement of the provisions of the Act. or the rules for the time being in force;
(c) exhibit this licence in some conspicuous part of the premises to which it relates;
(d) comply with any general or special directions that may be given by the Controller of Legal Metrology;
(e) surrender the licence in the event of closure of business and/or cancellation of Licence;
(f) submit the application for renewal of this licence as required under the rules within ninety days of expiry of the validity of the licence.
(g) not sell or offer, expose or possess for sale any nonstandard weight or measure.
2. Every condition prescribed after the issue of this licence shall, if notified in the Official Gazette, be binding on the persons to whom the licence has been granted.
Renewal Entries Current No…….. Date ……….
Renewed for Controller of Legal Metrology Current No…….. Date …….
Renewed for Controller of Legal Metrology Current No……….. Date …… Renewed for Controller of Legal Metrology Current No…….. Date ……… Renewed for Controller of Legal Metrology Seal Seal Seal Seal Hkkx 4 ¼x½ jktLFkku jkt&i=] ebZ 4] 2011 19¼91½ Current No…….. Date ……….
Renewed for Controller of Legal Metrology Current No…….. Date ……… Renewed for Controller of Legal Metrology
SCHEDULE – IV [See rule 11 (4) & (5)] Government of Rajasthan Office of Controller of Legal Metrology Licencing and renewal fees for manufacturers, repairers of dealers of weights and measures
1.Issue of licence / renewal of licence to:
(i) Manufacturers Rs. 1000/- per year
(ii) Repairers Rs. 500- per year
(iii) Dealers Rs. 500/- per year
SCHEDULE–V [See rule 11 (6)] Government of Rajasthan Office of Controller of Legal Metrology Register of licenced manufacturers/ Repairers/ Dealers of weights, measures, weighing / measuring instruments Office of ………………….
Licence Number Date of issue/ renewal Name and complete address of the manufacturer /repairer/ dealer Place where workshop/ factory is situated Articles to be manufactured/ repaired/ sold Trade mark/ monogram being used Orders regarding cancellation of licence Result of appeal Signature of competent authority Remark 1 2 3 4 5 6 7 8 9 10 Note: Column (4) does not apply to dealers, column (6) does not apply to repairers and dealers.
Seal Seal 19¼92½ jktLFkku jkt&i=] ebZ 4] 2011 Hkkx 4 ¼x½
SCHEDULE -VI [See rule 11(8)] Government of Rajasthan Office of Controller of Legal Metrology Security deposit to be made by licencee repairer Repairer of weights and measures including weighing Rs. 500.00 and measuring instruments.
SCHEDULE – VII [See rule 13] Register to be maintained by the manufacturers of weights and measurers.
1- Name and address of the manufacturer ………………...
2- Description of the weight or measure …………………….
3- (i) No. of the manufacturing licence ……………………
(ii) Date on which the licence was issued…………………
(iii) Period of validity of the licence ………………..
4- Particulars of order, if any, suspending or revoking ….…… the licence.
Sold within the state S.No. Month Unsold stock from previous month Quantity manufactured during the month Total 3+4 No. of item sold Dispatch voucher no. and date 1 2 3 4 5 6 7 Sold outside the state Name of the state No. of items sold Dispatch voucher no. and date Total sold (6+9) Balance (5-11) Remarks 8 9 10 11 12 13 Hkkx 4 ¼x½ jktLFkku jkt&i=] ebZ 4] 2011 19¼93½ Form LR-4 Register to be maintained by the repairer in respect of weights, Measures Name and address of the repairer …………..Licence No………… Date of Licensing ………… S.
No.
Date Name of the user from whom received Items and their Nos. booked for repair Receipt No. and date of issue to the user 1 2 3 4 5 Amount of repairing charges Amount of verification fee Total amount charged Date of return to the user Remarks 6 7 8 9 10 Form LD-4 Register to be maintained by dealer in weights and measures.
1- Name and address of the dealer ……………………….....
2- Description of the weight or measure …………………… 3- (i) Dealer licence No. …………………………………...
(ii) Date on which the licence was issued ………………
(iii) Period of validity of licence ………………………….
4- Particulars of order, if any suspending or ……………….
Revoking the licence.
5- Category of weight or measure …………………………..
(Category A or B) Sr.
No.
Month Unsold stock from the previous month Brought from within the state during the month Brought from outside the state during the month Total (3+4+5) 1 2 3 4 5 6 19¼94½ jktLFkku jkt&i=] ebZ 4] 2011 Hkkx 4 ¼x½ Sold within the state Sold outside the state No.
of items sold Dispatch voucher no. and date No.
of items sold Dispatch voucher No. and date Name of the state Total sold (7+9) Balance (6-12) Remarks 7 8 9 10 11 12 13 14 Schedule–VIII [See rule 15 (3)] Government of Rajasthan Office of the Controller, Legal Metrology, Certificate of verification Name of Legal Metrology Officer ………………… No……… I hereby certify that I have this day verified and stamped / rejected the under mentioned weights, measurers, etc.
Belonging to …………………. Locality …………… Denomination Weighing instruments Quantity Weights Measures Capacity Class Manufacturer Type Measuring instruments Verification Fee Rs. p Carriage, conveyance adjusting charges etc.
1 2 3 4 5 6 7 8 9 10 Total Rs. ….. deposited vide T. Receipt/ Money receipt .No. … dated ....………Repaired by/ Used by ………………………. (Signature) Next verification due on……….. Legal Metrology Officer Note:- In the case of rejected weights, measures, etc the Legal Metrology Officer shall give separate Certificate of rejection mentioning the reasons of rejection against each item.
Hkkx 4 ¼x½ jktLFkku jkt&i=] ebZ 4] 2011 19¼95½ Schedule-IX [See rule 16 (1)] Fee payable for verification and Stamping of Weights and Measures and Weighing and Measuring Instruments 1- (a) Bullion Weights:
Denomination
(1) Fee per piece (Rs.)
(2) 10 Kg. 30.00 5 Kg. 20.00 2 Kg. 20.00 1 Kg. 20.00 500 g. 15.00 200 g. 15.00 100 g. 15.00 50 g. 15.00 20 g. 15.00 10 g. 15.00 5 g. 15.00 2 g. 15.00 1g 15.00
(b) Carat Weights:
100g (500 c) 20.00 40g (200 c) 20.00 20g (100 c) 20.00 10g (50 c) 20.00 4g (20 c) 20.00 2g (10 c) 20.00 1g (5 c) 20.00 400mg (2 c) 20.00 200mg (1 c) 20.00 100mg (0.5 c) 20.00 40mg (0.2 c) 20.00 20mg (0.1 c) 20.00 19¼96½ jktLFkku jkt&i=] ebZ 4] 2011 Hkkx 4 ¼x½ 10mg (0.05 c) 20.00 4mg (0.02c) 20.00 2mg (0.01 c) 20.00 1mg (0.005c) 20.00
(c) Cylindrical knob type weights: (Including Brass Weights) Denomination
(1) Fee per piece (Rs.)
(2) 10 Kg. 20.00 5 Kg. 20.00 2 Kg. 20.00 1 Kg. 20.00 500 g. 10.00 200 g. 10.00 100 g. 10.00 50 g. 10.00 20 g. 10.00 10 g. 10.00 5 g. 10.00 2 g. 10.00 1g 10.00
(d) Sheet metal Weight (Bullion and other than Bullion) Fee per piece (Rs.)
(2) Denomination
(1) Bullion Weights Other than Bullion Weights 500 mg. 10.00 5.00 200 mg. 10.00 5.00 100 mg. 10.00 5.00 50 mg. 10.00 5.00 20 mg. 10.00 5.00 10 mg. 10.00 5.00 5 mg. 10.00 5.00 2 mg. 10.00 5.00 1 mg. 10.00 5.00 Hkkx 4 ¼x½ jktLFkku jkt&i=] ebZ 4] 2011 19¼97½
(e) Iron hexagonal, knob type weights and parallelepiped weights:
Denomination
(1) Fee per piece (Rs.)
(2) 50 Kg. 25.00 20 Kg. 20.00 10 Kg. 20.00 5 Kg. 20.00 2 Kg. 15.00 1 Kg. 10.00 500 g. 5.00 200 g. 5.00 100 g. 5.00 50 g. 5.00 20g 5.00 10g 5.00 5g 5.00 2g 5.00 1g 5.00
(f) Standard weights for testing of high capacity weighing machines:
Denominations Fee corresponding to Max permissible relative error
0.5/10000 in Rs.
Fee corresponding to Max permissible relative error
3.3/10000, 1.7/10000 and
1.0/10000 in Rs.
100kg 75.00 50.00 200kg 150.00 100.00 500kg 300.00 200.00 1000kg 750.00 500.00 2000kg 1500.00 1000.00 5000kg 3000.00 2000.00 19¼98½ jktLFkku jkt&i=] ebZ 4] 2011 Hkkx 4 ¼x½ 2-Capacity Measures:
Denomination
(1) Fee per piece (Rs.)
(2) 100 litre and above Rs. 57 for the Ist 100 litre plus Rs. 7 for every additional 100 litre or part thereof subject to maximum of Rs. 5000.
50 l 50.00 20 l 20.00 10 l 20.00 5 l 20.00 2 l 20.00 1 l 20.00 500 ml 10.00 200 ml 10.00 100 ml 10.00 50 ml 10.00 20 ml 10.00 10 ml 10.00 5 ml 10.00 2 ml 10.00 1 ml 10.00 3- Length Measures:
(a) Non-Flexible – Denomination
(1) Fee per piece (Rs.)
(2) 2 m. 10.00 1 m. 10.00
0.5 m. 20.00 1 m. graduated (at every cm) 20.00
0.5 m. graduated (at every cm) 20.00
(b) Fabric Plastic/ Woven/Steel tapes – Accuracy Class
(1) Fee per metre in Rs.
Class-I 10.00 Class-II 10.00 Class-III 5.00 Hkkx 4 ¼x½ jktLFkku jkt&i=] ebZ 4] 2011 19¼99½
(c) Folding Scales – Denomination
(1) Fee per piece (Rs.)
(2) 1 m. 10.00
0.5 m. 10.00
(d) Surveying Chain – Denomination
(1) Fee per piece (Rs.)
(2) 30 m. 100.00 20 m. 100.00 4-Beam Scale Class A & B:
Denomination
(1) Fee per piece (Rs.)
(2) 200 kg. 400.00 100 kg. 300.00 50 kg. 150.00 20 kg. 150.00 10 kg. 150.00 5 kg. 100.00 2 kg. 100.00 1 kg. 100.00 500 g and below 60.00 5-Beam Scales Class C& D:
Denomination
(1) Fee per piece (Rs.)
(2) 1000 kg. 200.00 500 kg 200.00 300 kg 200.00 200 kg 100.00 100 kg 100.00 50 kg 20.00 20 kg 20.00 19¼100½ jktLFkku jkt&i=] ebZ 4] 2011 Hkkx 4 ¼x½ 10 kg 20.00 5 kg 15.00 2 kg 15.00 1 kg 15.00 500 g and below 10.00 6-Non-Automatic Weighing Instruments-Mechanical (analogue) Class III & IIII :
400 t 4000.00 300 t 3000.00 200t 3000.00 150 t 2000.00 100 t 2000.00 80 t 2000.00 60 t 2000.00 50 t 2000.00 40 t 2000.00 30 t 2000.00 25 t 2000.00 20 t 2000.00 15 t 2000.00 10 t 1000.00 5 t 500.00 3 t 400.00 2 t 400.00 1500 kg 300.00 1000 kg 300.00 500 kg 300.00 300 kg 200.00 250 kg 200.00 200 kg 100.00 150 kg 100.00 100 kg 100.00 Hkkx 4 ¼x½ jktLFkku jkt&i=] ebZ 4] 2011 19¼101½ 50 kg 100.00 30 kg 100.00 25 kg 60.00 20 kg 60.00 15 kg 30.00 10 kg 30.00 5 kg 30.00 3 kg 30.00 2 kg 30.00 1 kg 15.00 500 g. and below 15.00 7-Non-Automatic Weighing Instruments-Electronic Class III & IIII 400 t 4000.00 300 t 3000.00 200t 3000.00 150 t 2000.00 100 t 2000.00 80 t 2000.00 60 t 2000.00 50 t 2000.00 40 t 2000.00 30 t 2000.00 25 t 2000.00 20 t 2000.00 15 t 2000.00 10 t 1000.00 5 t 1000.00 3 t 500.00 2 t 500.00 1500 kg 250.00 1000 kg 250.00 500 kg 250.00 300 kg 200.00 19¼102½ jktLFkku jkt&i=] ebZ 4] 2011 Hkkx 4 ¼x½ 250 kg 200.00 200 kg 200.00 150 kg 200.00 100 kg 200.00 50 kg 200.00 30 kg 200.00 25 kg 200.00 20 kg 100.00 15 kg 100.00 10 kg 100.00 5 kg 100.00 3 kg 100.00 2 kg 100.00 1 kg 100.00 500 g. and below 100.00 8-Not Automatic Weighing instruments both mechanical and electronics class I & II:
Capacity Fee (Rs.)
Exceeding 50 t 3000.00 Not exceed 50t but exceed 10t 2000.00 Not exceed 10t but exceed 1t 1000.00 Not exceed 1t but exceed 50kg 500.00 Not exceed 50kg but exceed 10kg 300.00 Not exceed 10kg 200.00 9-Automatic Weighing Instrument:
Capacity Fee in Rs.
Exceeding 100 t 4000.00 Not exceeding 100t but exceeding 50t 3000.00 Not exceeding 50t but exceeding 10t 2000.00 Not exceeding 10t but exceeding 1t 1000.00 Not exceeding 1t but exceeding 50kg 500.00 Not exceeding 50kg but exceeding 10kg 250.00 Not exceeding 10kg 200.00 Hkkx 4 ¼x½ jktLFkku jkt&i=] ebZ 4] 2011 19¼103½ 10-Volumetric measuring instruments :
(a) Dispensing pumps each pump : Rs.1000.00 per unit
(b) Totalizing counter : Rs. 500.00 per unit
(c) Other instruments :
Capacity Fee in Rs.
Exceeding 100 litre Rs. 500 for the Ist 100 liters plus Rs. 250 for every additional 100 liters or part thereof Not exceeding 100 litre but exceeding 50 litre
500.00 Not exceeding 50 litre but exceeding 20 litre
250.00 Not exceed 20 litre 200.00 11- Flow meters:
Flow rate up to 100 litre/ min. Rs.2000.00 Above 100 litre/ min upto 500 litre/ min Rs.3000.00 Above 500 litre /min. Rs.5000.00 12- Linear Measuring Instruments:
Taxi, Autorishaw meters Rs.100.00 Other meters Rs.50 for the Ist 1000 m. or part there of Plus Rs. 5.00 for every additional 100 m. or part thereof 13- Clinical Thermometer : Rs. 0.50 per unit 14- Water meter : Rs. 25.00 per unit 15- Peg Measure:
30 ml 50.00 60 ml 50.00 100 ml 50.00 19¼104½ jktLFkku jkt&i=] ebZ 4] 2011 Hkkx 4 ¼x½
16. CNG Dispensers : Rs. 1000.00 per unit
17. LPG Dispensers : Rs. 1000.00 per unit
18.Counter Machine :
(i) Up to 10 Kg. Rs. 20.00
(ii) Above 10 Kg. Rs. 50.00
SCHEDULE -X [See rule 24(1)] Form of appeal against an order of a Legal Metrology Officer/ Controller Legal Metrology:- 1-Name and address of the appellant.
2-No. and date of order of Legal Metrology Officer/ Controller of Legal Metrology against which the appeal is preferred.
3-Whether the appellant desires to be heard in person or through an authorized representative.
4-Grounds of appeal
SCHEDULE -XI [See rule 25] Compounding fees for various offences Sr.
No.
Section and nature of offence Penal Section Compounding fee 1 2 3 4
1. S. 8(3) Use of weight, measure or numeration other than the Standard weight, measure or numeration 25 Rs.2500.00
2. S. 8(4) Manufacture of weight or measure not conforming to Standards 27 Rs.2000.00
3. S. 10 Transaction or dealing or contract in respect of goods etc, by weight, measure or number other than prescribed.
28 Rs.1000.00 Hkkx 4 ¼x½ jktLFkku jkt&i=] ebZ 4] 2011 19¼105½ 1 2 3 4
4. S. 11 Quote or make announcement or issue or exhibit of price list or changing of price otherthan in accordance with standard unit of weight or measure or numeration.
29 Rs.1000.00
5. S. 12 Demanding or receiving any articles or thing on service in excess or less than the quantity specified by contract or agreement.
30 Rs.1000.00
6. S.17 Non-Maintenance of records, registers by manufacturer, dealer or repairer and Non-Production of weight, measure document, register, on demand 31 Rs.500.00
7. S 33 Sale of Weight or Measure without verification 33 Rs. 5000.00
8. S. 24 Use of unverified weight or measure in transaction or protection 33 Rs. 5000.00
9. S. 34 Sale or delivery of commodities by Non Standards Weights or Measure 34 Rs. 2500.00
10. S 35 Rendering service by Non Standard Weight or Measure 35 Rs.2500.00
11. S.18(1) Non-Compliance of declaration in respect of prepackaged commodity by manufacturer/ dealer 36(1) Rs. 2500.00
12. S.18(1) Non-Compliance of net quantity-requirement of prepackaged commodity by manufacturer 36(2) Rs.15000.00 19¼106½ jktLFkku jkt&i=] ebZ 4] 2011 Hkkx 4 ¼x½ 1 2 3 4
13. S. 23 Manufacturer of weight or measure without licence 45 Rs.5000.00
14. S. 23 Repair/sale of weight or measure without licence 46 Rs.2000.00
15. S 47 Tempering with License 47 Rs. 5000.00
16. S. 53(3) Provision of any rule made under the Act 53(3) Rs. 500.00 [No.F6(410)CI/LM/Model/Rules/Act/2010] By order of the Governor, MkW- eksgu yky ;kno] Deputy Secretary to the Government.
___________ Government Central Press, Jaipur.