Fees for inspection of boilers and parts thereof under construction shall be the same as prescribed in regulation 395-A, 395-B, 395-G, 395-D and 395 E.
(ii) Cost Mountings and Fittings. (a) Fees shall be charged as required under Regulation 395-G. and 395 D.
Fabricated mountings and fittings.-(b) A fee of Rsl 150.00 shall be charged for examination and certification of single lot of mountings and fittings not exceedings ten.
The manufacturer, in addition, shall supply fee of charge the labour and appliances which may be necessary for such mechanical tests as are required under the Regulation.
Failing to find facilities for the prescribed test, the manufacturer shall bear the cost of carrying out such tests elsewhere.
(c) The charges for the examination of drawings only for mountings and fittings to be manufactured shall be Rs. 150 for each such drawing.
(iii) Fees for inspection, examination, testing and cent, fication of boilers tubes and scantlings under construction.— The inspection fee for boilers constructed in India shall be calculated as per Regulation 395 A :
(a) at Four times the registration fee for a boiler of riveted construction ;
(b) at four times the registration fee for a boiler of welded construction.
( i v ) F e e s f o r i n s p e c t i o n o f b o i l e r s c a n t l i n g s d u r i n g construction shall be charged as Regulation 395 G Fees for inspection of tubes and pipes shall be charged at Rs. 100.00 per metric tonne or a fraction there of [Regulation 395 A ii (3)1 The manufacturer, in addition, shall supply free of charge the labour and appliances which may be necessary for such mechanical tests as may be carried out in his premises or those of the steel makers and tube makers in accordance with the standards laid down in the Regulations. Failing to dind facilities himself for the prescribed tests, the manufacturer shall bear the cost of carrying out these tests elsewhere.
( v ) Fees for examination and certification of scantling of boilers steam pipes, economisers and superheaters during fabrication at s i t e — T h e f e e s f o r s u c h e x a m i n a t i o n a n d ce r t i f i c a t i o n f o r s u p er v i s i o n req u i r ed u n d er c l a u s e ( v ) o f Regulation 4 shall be equivalent to the fees required for the registration of the boiler.
The owners or erectors shall supply free of charge the labour and appliances which may be necessary for such tests as may be carried out in their premises in accordance with the standards laid down in the Regulations. Failing to find facilities themselves for the prescribed tests they shall bear the cost of carrying out these tests elsewhere.
( v i ) Fee for the examination of plans of Boilers. The fee for the scrutiny of plans under sub-regulation (a) of Regulation 393 shall be on the scale prescribed in Regulation 385, but when a plan which has been scrutinized and in respect of which alterations have been suggested is re-submitted for scrutiny, a separate fee at the rate of 10 per cent of the fee for the first scrutiny of the drawings shall be payable if the plan contains alterations other than those previously suggested.
(vii) Fees for examination of plans of steam pipes. the fee required under sub-regulation (b) of Regulation 395 shall be at the rate of Rs. 30.00 per 30 metres (100 ft.) of piping or part there of inclusive of all fittings, exceptings fittings like desuperheaters, steam receivers, feed heaters and separately fired superheaters. For any fittings like de-superheaters, steam receivers and separators, the fee shall be Rs. 150.00 for each such fittings.
, (viii) Fees for examination of steam pipes :nor grant of certificates in Form III-A.—A fee shjall be charged as per Regulation 395 B.
(ix) Fees for testing welders.-For qualification or requalification andtests of operators engaged in repairing boilers by welding and welders engaged in welding of boilers and steampipes under construction, erection and fabrication at site in accordance with the requirement of Chapter XIII of regulation, a fee of Rs. 50.00 for plate welding, Rs. 50.00 for pipe welding and Rs. 50.00 for tube welding shall be charged which should be accompanied by an application on Form IF.
The candidates or the organization that sends the candidates for tests shall bear all expenses connected with the materials, the finishing and testing of specimens.
(x) Fees for the examination of steam receivers separators etc.
under construction lbr the grant of certificate in Form of the regulations.—The examination fees to be charged in this case shall be as Mows :
Rs.
(i) Fora vessel up to 200 mm. (r) diameter 180.00
(ii) Fora vessel more than 200 mm. (8') 280.00 diameter and upto 400 mm.
- diameter (Ili) For a vessel over 400 mm. (18") diameter 400.00 The manufacturer, in addition shall supply free of charge the labour and appliance which may be necessary for such mechanical tests as are required under the Regulations, Failing to nnd facilities himself for the prescribed tests, the manufacturer shall bear the cost of carrying out these tests elsewhere.
(11) Other toes.—For any other matter which in the opinion of the State Government would involve time and labour as provided for In section 29 (f) but not prescribed in these rules, the fees shall, be charged at the discretion of the State GoVernment.
& flee to cover inspection and tests.—A fee paid for the inspection of a boiler as prescribed under rule 6 shall cover through examination, hydraulic test and steam test where such are necessary.